When planning an initial MU assembly, you should also look at FREQUENCY CENTRAL :roll: :roll: Especially for DIY beginners, it is a notable variant: finished front panels, perfect assembly instructions and wireless front connections :yay: you could also, for example, buy one fully assembled module a...

dotcom is the cheap entry stuff for sure, I agree with XERO, this is the only way a first step into the MU world could look like. look for offers at all levels (muffs, FB, ....) Do not buy hastily, do not fixate on alleged bargains I have acquired a few dozen modules in the same way over the years ...

MOON MODULAR

... but I think you are first investing in your own country
DotCom

--- have you or anyone else here built/used any of his modules? I am working on the following modules: - ADSR (10PCBs) - Master Clock - MIDI2CV (2) - CV Arpeggiator (2) - LFO AM-FM - LOCKED S&H - QUAD LFO - JOYSTICK I am currently assembling the PCBs and have only had a few front panels printed by ...

While I think we are spoiled with choices already, here is the list of what I think we are missing (or not available anymore) 1. Samplers -- 2. CV recorders -- 3. .... 4. Wave table and complex VCOs -- 5. going beyond step sequencers -- 6. Voltage controlled Distortion/fuzz and drive modules 7. Pre...

Flareless wrote: ↑

Fri Feb 19, 2021 11:04 am

Working.... Please Stand By....

IMG_5247.jpeg

WOW
I'm sure some are very curious

.... so there's not excuse for what took about 60 days . But it gets worse... Here's how my 3 modules (2 of them being BIG ones) were packed... at first I thought maybe I didn't get everything I ordered... but no, they were each wrapped in a modest bubble wrap sheet, then crammed in this tiny box t...

.... When I listen to and watch this video by Tom Noise, I more and more want to acquire this B2600 as quickly as possible ... Precision, for its possibilities, its architecture for sound synthesis and not for sounds from R2-D2 ... to whom do you say this: I could have told you this a long time ago...

it's not the cable / plug what's the problem?

You should contact the manufacturer

The background color seems to be a very dark gray instead of deep black .. I have now made almost 100 panels myself and coated them with color: 1 layer metal base, 2x 2K-PUR paint color RAL 9011 Synth - Panels blk kl.jpg I am very satisfied because it should fit all of them: DotCom, MOON, CORSYNTH ...

.....Perhaps on user-supplied metal? As much as I'd love to learn silkscreening, it's another hobby requiring skills and time I don't have. This looks like a great alternative to engraving. these are my self-made and designed 5U metal panels printed by LWSS : IMG_20210108_145454_1.jpg It is a great...

I don't stress myself with the decision whether 5U or eurorack - I take both! First of all, 5U is the cooler system, the classic (MOOG) variant! I would never want to do without that. With Eurorack you have the choice between inexpensive basic elements and exciting special modules. With Behringer's ...

this is my design for a YUSYNTH - Dual ADSR

and now ... LOWER WEST SIDE STUDIO actually did it - :hail: "thank you, Rich, I love you!" :loves: 50 panels arrived today :yay: :yay: Pan-4.jpg Pan-2.jpg Pan-1.jpg and here they are with some of the boxes with almost ready PCBs Panel w Box 1.jpg It's a great quality of my own faceplate designs. I h...

I bought most of it here at muffs

but also on Germany's eBay Kleinanzeigen

and on modulargrid.net

some on FB,

very little on ebay auction

Flareless wrote: ↑

Tue Dec 29, 2020 4:25 am

It's a small change but I think a useful one.

...of course
I often use it on other sites (modular grid, Synthcube, ...)

DOEPFER PSU V3.0 my question applies to the primary mains connection for 220V doepfer PSU V3.0-1.jpg doepfer PSU V3.0-2.jpg doepfer PSU V3.0-3.jpg doepfer PSU V3.0-4.jpg you can see the connections J9 / J11 ​​and J13 / J23 measured resistance between 9-11 and 13-23 each about 12 ohms are these the ...

I own 4 modules of CotK (2.hand market) they are (from left to right below): - C965 Clock Denominator - C964 Ratchet Sequencer - C964 Ratchet Sequencer - C962B Sequential Switch CotK 12-15V-1.jpg here the rear views CotK 12-15V-2.jpg As you can see, the two modules on the left are equipped with DotC...

DOEPFER PSU V3.0 my question applies to the primary mains connection for 220V doepfer PSU V3.0-1.jpg doepfer PSU V3.0-2.jpg doepfer PSU V3.0-3.jpg doepfer PSU V3.0-4.jpg you can see the connections J9 / J11 ​​and J13 / J23 measured resistance between 9-11 and 13-23 each about 12 ohms are these the t...

what do you need the o, 1uF for?
There are some on the module board and on my bus board ...

dslocum wrote: ↑

Wed Dec 02, 2020 12:18 pm

I'm working with the great folks at Befaco to license their Euro BURST module for MU.

great JOB !!

dslocum wrote: ↑

Wed Dec 02, 2020 12:18 pm

I would love to hear your ideas for a name for this new MU version.

to be a little off the ratched:

Tremble Gamble

so, my 2 cents ... ...and I only have a fraction of the experience of everyone else here :despair: Measured by the result, the effort involved in playing polyphonically with a modular appears to me to be exorbitantly high. :bang: Saw this guy play and always regulate all voices in a minimal way ... ...

Club of the Knobs -CotK- presented 2 new modules...
- C919 STAGE PERFORMER
- C909-RS TWO ROOMS
controlled via C1650 EXTENDED RHYTHM CONTROLLER

but there is another unknown module

...and announced the following video

yesterday on Yves Usson's FACEBOOK-site:

"Prototype of a new kid (original design) in the YUSYNTH line of
modules (after a long break, but plenty of new modules to come ...).
Tomorrow test and I hope validation of the newcomer."

What it will be ?

only the scope is in 5U offer:

Syntha Scope