Anyone experiencing noise like this from their unit? I get a good bit of noise when I move the Mix knob CW from dry. It sounds like the output is distorting all the time? https://drive.google.com/file/d/1MmX-RZKaDNSHXVYCI2Hfoetui4eieD1t/view?usp=sharing I just came here to ask about this! It is not...

Thanks for the follow-up!

I'm still really loving this filter - and such a fun, simple build.

Here's a bit I just made playing around with the Final output, and using sync mode with a Turing Machine on osc A. The "percussion" is the Strike input and the Angle being triggered by a clock divider. This is just DPO, one wave going through the Xaoc Phase Rotator, and some Reverb: https://soundclo...

leftbracket Thank you! I'll do some studying accordingly. DPO just arrived yesterday and initial results are off-the-charts... It seems like it will take more work to learn to tame it than to learn to pull weird stuff out of it, and I like that!

Can anyone point me to the context/history of "259 style modulation routing" mentioned in the manual's intro?

Thanks!

First off, can't answer this - so apologies. However, I have the eurorack Drone Commander + Expander and would be happy to run any tests or answer questions about that setup to the best of my ability if you are curious.

Hey mantid. 1) The traditional application of this is just like a DJ mixer's cue function... you can bring in / tune / adjust signals before bringing them into the main mix with the fader. 2) No - those are aux sends for *channels* 1 and 2 (and 3 and 4), not *auxes* 1 and 2 overall. 1) I understand...

Thanks for listening - I like to let patches like this run for quite a while as I'm working.

Apologies in advance for newb-questions: I have searched and not found great results. 1) What are practical applications of the dedicated Cue output? In what situation would you use that to listen to cue instead of headphones? I do understand how you could use the cue bus to run through some outboar...

My Pulsar arrived yesterday, and it seems the Mode encoder push doesn't work. For example, in Sequence mode, I can rotate it and see the cursor moving, but clicking it won't toggle a step. In Euclidean mode, twisting it will add divisions, but pressing and twisting does not rotate the offset, it jus...

I just like more info than less. I've figured out all the apparent function via trial and error at this point and do love this filter. The two CV inputs for Cutoff is a fun approach, although I wouldn't have minded one for resonance.

This is displacing some of my momentum for adding a DPO to my system, but seems like they might also work well together. Thanks for the demo!

It may or may not feel like cheating, but I bought Rings because I love to listen to it do its ring-thing... Here it is playing rather nicely (imho) with Kamieniec and a little bass-drum propulsion from 0-coast:

https://soundcloud.com/mantid/vespertine-flower

In my tests, these do work pretty reliably as triggers - I thought you were talking about reliably sending something like volt-per-octave signals (or in your case, using a specific frequency to select a sample). If you just need to hit "go" on the unit, this is absolutely what these are great at!

Thanks for the follow up and nice idea with the shorting cables. Continuing my experiments using Blinds to force 0v, I've noticed a hint of bleedthrough on channels which should be empty. Let me know if you have this, too. I don't think it is a problem, practically speaking, but is something to be a...

I don't think these will be your best bet as voltage through them is unreliable and seems like it could change per-day based on skin and atmospheric conditions. These can work fine as triggers, if you have a solid constant source of voltage (like a VCA turned up), but for a _specific_ voltage, you'r...

Just wanted to follow up and say that my module is continuing to work fine and it is a lot of fun! I'd like to get back on track talking about applications. How are those of you with working modules routing this? One thing I did play with is tuning 4 oscillators to the same frequency but different w...

I've been loving DATA for a few months - it has certainly bolstered my understanding of how all kinds of signals in my system are working and has been an incredible boon for troubleshooting or understanding modules. I bought it for the oscilloscope but keep finding uses for all the other modes. Such...

So... The "fix" that ADDAC supplied STILL doesn't work - but - they emailed me one which does. I'm not sure if they are ready to release it (allegedly their webserver was hacked and this is a priority). If you bought resistors to stack onto the existing ones, you may want to hold off. The "new" fix ...

I haven't heard back from ADDAC yet but given I would like to use this to control frequency voltage, those values are not going to work so well. Maybe I can make peace with it as a "rotating pitch shifter"? :despair: :despair: I'm also surprised that Thonk hasn't followed up on my request to make su...

Somehow that photo of the stereoscope reminded my that my daughter has a little USB microscope :doh: I took a look, and they did all look "fine" but I touched them all up again with a needle-tip iron, and now they look better (at least more squarely aligned). I'm not sure if this is valid, but measu...

I've attempted the repair by adding new resistors in parallel and am still getting weird results: input 1: 1v in ---> 0.8v out input 2: 2v in ---> 1.6v out input 3: 3v in ---> 3.18v out input 4: 4v in ---> 3.2v out :sadbanana: I'm sorry to hear this! I haven't received my resistors from Mouser yet ...

I've attempted the repair by adding new resistors in parallel and am still getting weird results: input 1: 1v in ---> 0.8v out input 2: 2v in ---> 1.6v out input 3: 3v in ---> 3.18v out input 4: 4v in ---> 3.2v out So... something changed! But still not there. I've retouched each junction again with...

Lots of cool tangents in this thread! Some thoughts: - My interest in underground/punk/garage is what ultimately brought me to modular. I've always been fascinating by people purging their minds of "darkness" by fearlessly exposing it to sunlight. I noticed early on that the folks into metal/punk/et...

Hey whinger - JakoGreyshire and I will be heading to Seattle for the Patchwerks Signal event Sunday the 14th: https://www.thestranger.com/events/25976884/patchwerks-presents-signals-2018-synthesizer-meetup If you'd like to meet us in Port Townsend, I'd be happy to drive the rest of the way (either t...