Search found 67 matches

by vantablack
Sun Aug 16, 2020 6:47 am
Forum: Eurorack Modules
Topic: Qu-Bit Nebulae v2
Replies: 1454
Views: 132835

Re: Qu-Bit Nebulae v2

First of all many thanks for all your help fruitsnake! I'm posting y2 videos which i hope can help you in identifying and clarifying the 2 problems. On "VIDEO 1 LIVE SOURCE" i recorded a small sample and turned the SPEED and BLEND knobs. As you can see the SPEED knob works as it should at the phase...
by vantablack
Sun Aug 09, 2020 3:05 pm
Forum: Eurorack Modules
Topic: Qu-Bit Nebulae v2 - alternative software
Replies: 72
Views: 5162

Re: Qu-Bit Nebulae v2 - alternative software

I wanted a better live experience where the Nebulae: always records whatever is in the input (at full volume/ignoring the blend knob), and never outputs the dry signal. Pretty sure others have talked about this but I never found a good solution. The changes below seem to do the trick when using Tec...
by vantablack
Tue Jul 14, 2020 6:33 am
Forum: Eurorack Modules
Topic: Qu-Bit Nebulae v2 - alternative software
Replies: 72
Views: 5162

Re: Qu-Bit Nebulae v2 - alternative software

should phase vocoder behave the same way as grain looper? if I have blend other than full cw depending on slice division and/or selection the phase vocoder side behaves as if it's looping a very small part in the end of the audio. seems to me like the blends are independent somehow?
by vantablack
Thu Apr 02, 2020 11:26 am
Forum: Eurorack Modules
Topic: Qu-Bit Nebulae v2
Replies: 1454
Views: 132835

Re: Qu-Bit Nebulae v2

can anyone tell me how the flash drive for the nebulae is supposed to be organized (files/folders)? i was going to try a few of the alternate instruments, and realized that my drive has no instruments anywhere on it. just samples in the root directory. i wasnt sure where to put the .instr and .pd f...
by vantablack
Mon Feb 03, 2020 7:58 am
Forum: Expert Sleepers
Topic: Disting mk4 Lin/exp Vca
Replies: 4
Views: 323

Re: Disting mk4 Lin/exp Vca

it is, i'll be using Zadar
by vantablack
Sun Feb 02, 2020 2:47 pm
Forum: Expert Sleepers
Topic: Disting mk4 Lin/exp Vca
Replies: 4
Views: 323

Re: Disting mk4 Lin/exp Vca

I’ll read up on how to use multiplier as a Vca
by vantablack
Sat Feb 01, 2020 12:47 pm
Forum: Expert Sleepers
Topic: Disting mk4 Lin/exp Vca
Replies: 4
Views: 323

Disting mk4 Lin/exp Vca

Is there a way to configure the vca+ad env to have the vca respond according to external envelope? Or is there possibly a older firmware for disting mk4 that has a regular Vca algorithm? I am in desperate need of a vca.

Thx.
by vantablack
Wed Jan 22, 2020 3:20 pm
Forum: Expert Sleepers
Topic: Disting Feature Requests
Replies: 539
Views: 30999

Re: Disting Feature Requests

Vca without internal envelope, to be used with own envelopes would be good. maybe a bypass envelope option in the vca+envelope that's already there?
by vantablack
Sun Jan 19, 2020 10:14 am
Forum: Eurorack Modules
Topic: Qu-Bit Nebulae v2
Replies: 1454
Views: 132835

Re: Qu-Bit Nebulae v2

thetechnobear wrote:
Sun Jan 19, 2020 8:44 am
You could work it out by browsing instr code,
But it’s probably easier just to (re-)install the version you want.
Ah, so a install wipe all user instruments etc. cool, will do it. the instrument picker is.. difficult :lol:
by vantablack
Sat Jan 18, 2020 10:18 am
Forum: Eurorack Modules
Topic: Qu-Bit Nebulae v2
Replies: 1454
Views: 132835

Re: Qu-Bit Nebulae v2

Is it possible to see which instruments are installed simply by browsing the sd-card that's on the Pi? I don't even remember which FW I got installed, the qu-bit "beta" on GitHub which fixed the Pd crash or one of Danish ones. Fw wise (or is it an alt granular.inst?) I want the granular with switche...
by vantablack
Mon Sep 16, 2019 4:53 am
Forum: Eurorack Modules
Topic: Omnimod - first post updated 19/10/17
Replies: 1631
Views: 134205

Hell will freeze, then melt, freeze again, and melt again, and Jesus will return a few times, messiah too, before we'll see any of that. I reckon we should learn to live with what we have with this. :) When the rams horn echoes over Jerusalem it’s either because 1, Mashiach has come. 2, Half life 3...
by vantablack
Sun Aug 25, 2019 6:34 am
Forum: Eurorack Modules
Topic: Qu-Bit Nebulae v2
Replies: 1454
Views: 132835

loop recordings... continuing from my last post.... has anyone else noticed when you 'overdub' recordings it all ways starts at the beginning of the loop - seems a bit odd. e.g. record an 8 bar loop (from empty buffer) , exit record start a recording half way thru the record , say bar #4, for 1 bar...
by vantablack
Mon Aug 19, 2019 1:55 pm
Forum: Expert Sleepers
Topic: Fh-2 config and op-z
Replies: 2
Views: 650

Aye now I got that straight. Right now the config is two channels with v/oct and gate, the rest is gates and clock on 8. I’ve been reading up on stuck gates, disabling clock out from op-z helped and one converter sent gates as expected but the cv and gate/voice channels are still unusable. Same resu...
by vantablack
Thu Aug 15, 2019 6:18 am
Forum: General Gear
Topic: Teenage Engineering OP-Z
Replies: 277
Views: 43747

Does oplab get gates stuck? Sending gates to Fh-2 results in gate high being default state. gates/trigs also gets lost or not transmitted but I’m not sure on which side the fault or settings is needed :hmm:
by vantablack
Tue Aug 13, 2019 8:14 am
Forum: Expert Sleepers
Topic: Fh-2 config and op-z
Replies: 2
Views: 650

Fh-2 config and op-z

I recently got a FH2 to be able to use my op-z with my Eurorack skiff. The fh2 configuration seems straight forward, tho I’m not getting it right. I’ve been searching for configs or screenshots of different configs to no avail. Basically I need to know the relation between converter outputs and chos...
by vantablack
Sun Aug 11, 2019 3:14 am
Forum: Eurorack Modules
Topic: Qu-Bit Nebulae v2
Replies: 1454
Views: 132835

I made a little sample pack of various ethnic instruments and singing and what have you to use with the Nebulae 2. Basically just sampled various instruments from Kontakt 6's Best Service Ethno World. All played in the pentatonic major scale. Files is here for anyone interested: http://www.marsmelo...
by vantablack
Tue Aug 06, 2019 5:10 am
Forum: General Gear
Topic: Teenage Engineering OP-Z
Replies: 277
Views: 43747

This thing is infuriating! It's so cute and fun to play, but the way the files map to presets and engines and samples is not documented anywhere. The config files make no sense- and yet it's brilliant :/ I guess if you have a hand-to-phone with a supercomputer from a particular manufacturer and all...
by vantablack
Fri Aug 02, 2019 6:48 am
Forum: Eurorack Modules
Topic: Make Noise Rosie
Replies: 32
Views: 2183

My one issue with Rosie is that the crossfade seems to have a dip in loudness when it's 50/50. When fully to one side, the individual A or B channel always seems significantly louder than the 50/50 mix of the two. I usually find my self adjusting the main level while crossfading to keep the volume ...
by vantablack
Sat Jul 27, 2019 8:07 am
Forum: General Gear
Topic: Pocket Operations: A portable book of drum machine patterns
Replies: 19
Views: 2260

Very well done, thank you
by vantablack
Wed Jul 17, 2019 12:35 pm
Forum: Eurorack Modules
Topic: Erica Synths Graphic VCO
Replies: 216
Views: 20479

post ot.
by vantablack
Fri May 24, 2019 12:59 pm
Forum: Eurorack Modules
Topic: Erica Synths Graphic VCO
Replies: 216
Views: 20479

The sub oscillator waves now at least are correct, but they're still not phase aligned with the main waveform and drift subtly, even with detune set to 0. Mix is still the wrong way around: the sub oscillator signal is at 0, not 100. Sub only mix is at 0 and both at 100? Is using only sub out with ...
by vantablack
Sat May 11, 2019 6:57 pm
Forum: Eurorack Modules
Topic: Erica Synths Graphic VCO
Replies: 216
Views: 20479

You sound fairly confused. "If i se fx amount as amount/scale/width and fx as rate, it doesn't behave in that" doesn't really make sense to me. You set the effect type with the top left encoder. And then use the right encoder to set various parameters for the effect. The FX amount pot then controls...
by vantablack
Sat May 11, 2019 2:07 pm
Forum: Eurorack Modules
Topic: Erica Synths Graphic VCO
Replies: 216
Views: 20479

Not noticed this one specifically. But the module has a few oddities when it comes to parameter ranges so it wouldn't surprise me. fx amount and fx knobs make no sense on my module. if i se fx amount as amount/scale/width and fx as rate, it doesn't behave in that way at all. i tried the other way a...
by vantablack
Tue May 07, 2019 11:33 pm
Forum: Eurorack Modules
Topic: Qu-Bit Nebulae v2
Replies: 1454
Views: 132835

synonymist wrote:After just my first time playing it, I'm pretty sure that it will replace my Morphagene.
Oh i can help you get rid of that morphagene :hihi:
And thank you for the welcoming
by vantablack
Tue May 07, 2019 11:27 pm
Forum: Eurorack Modules
Topic: Qu-Bit Nebulae v2
Replies: 1454
Views: 132835

... If i want to avoid crash or reboot loop or whatever bug it is, am i correct that 2.1.1 fw has to be updated by Qu-bit, or install the "alternative" fw by danish? That sounds about right, though there is at least one other option. Always return to an instrument in the default bank before powerin...

Go to advanced search