Search found 14 matches

by APiazu
Fri Feb 28, 2020 4:16 am
Forum: Music Tech DIY
Topic: New project from Psyco X [XDS3]
Replies: 44
Views: 3946

Re: New project from Psyco X [XDS3]

Looking so much forward to this! the syncussion was a king project and now this?!?! i have only been able to drool in dreams of trying out an SDS 3... this is a much needed project, making available those beasts of percussion synthesis. thanks man!
by APiazu
Fri Aug 30, 2019 1:12 pm
Forum: Tubbutec
Topic: Unipulse Roland TR-33 and Yamaha MR10 - some trig problems
Replies: 18
Views: 2005

if the problem is what i assume it is - that the unipulse doesn't recognise "status byte 90" as a "note off" message. Then maybe you could make a little change in the code for the unipulse, so it will work?

Cheers..
by APiazu
Fri Aug 30, 2019 1:11 pm
Forum: Tubbutec
Topic: Unipulse Roland TR-33 and Yamaha MR10 - some trig problems
Replies: 18
Views: 2005

Update!

So - the MPC2000XL apparently sends out a "status byte of 90" on "note on" and on "note off". Usually however "note off" is recognised as midi status byte 80.. In the picture below the MPC 2000XL is sending midi notes in the first long row of note messages. When the timing clock messages kicks in, i...
by APiazu
Fri Jan 04, 2019 1:25 pm
Forum: Tubbutec
Topic: Unipulse Roland TR-33 and Yamaha MR10 - some trig problems
Replies: 18
Views: 2005

So your midi keyboard goes to the MPC midi in and from the MPC midi out to the uniPulse? And that works, but if the MPC sends its own midi, it does not? Correct? Then it is very likely not a hardware issue, but one with the midi protocol. However no idea what this might be. Yes that is correct. I'm...
by APiazu
Fri Dec 14, 2018 9:06 am
Forum: Tubbutec
Topic: Unipulse Roland TR-33 and Yamaha MR10 - some trig problems
Replies: 18
Views: 2005

you don't have any interest in looking into this or giving a more specific guess to what the problem might be? I have to say, it disappoints me that you ignore my problems. I did pay you a somewhat large sum of money (uni pulse and mody poly) at least you could show some kind of interest in this case?
by APiazu
Sat Nov 24, 2018 10:44 am
Forum: Tubbutec
Topic: Unipulse Roland TR-33 and Yamaha MR10 - some trig problems
Replies: 18
Views: 2005

I could imagine you're busy - but it would be nice if you would share some thoughts... So, i ran through all the solderings and everything tests out well. I think the problem is, that the unipulse doesn't recognise note off from my MPC (and i just have to mention that nothing is wrong with my MPC, i...
by APiazu
Thu Nov 15, 2018 5:44 am
Forum: Tubbutec
Topic: Polysix Overlays
Replies: 11
Views: 2069

Will there be overlays for the mono poly as well? :))
by APiazu
Wed Nov 14, 2018 10:31 am
Forum: Tubbutec
Topic: Unipulse Roland TR-33 and Yamaha MR10 - some trig problems
Replies: 18
Views: 2005

have you heard of anybody else having similar problems? I just remembered that i had similar problems while we were soldering - i was sequencing it with a machinedrum. The Unipulse reacted in a similar way to that of the Mpc 2000. You have any clues as to whether it could have something to do with t...
by APiazu
Sat Nov 10, 2018 9:56 am
Forum: Tubbutec
Topic: Unipulse Roland TR-33 and Yamaha MR10 - some trig problems
Replies: 18
Views: 2005

Yeah it makes no sense to me either. I guess i would call it "real" midi thru - into a midi track on the mpc and from there on out. If i record that sequence on to the mpc and then play it back from there, the problem occurs.
by APiazu
Wed Nov 07, 2018 10:23 am
Forum: Tubbutec
Topic: Unipulse Roland TR-33 and Yamaha MR10 - some trig problems
Replies: 18
Views: 2005

Thanks, and thank you for making such tools available! Bought the mody/poly mod for my mono poly. Very exciting stuff indeed.

Can't see anything but note on and off when i monitor the output of the mpc. Hmmm
by APiazu
Sat Nov 03, 2018 8:50 am
Forum: Tubbutec
Topic: Unipulse Roland TR-33 and Yamaha MR10 - some trig problems
Replies: 18
Views: 2005

Further testing

The unipulse trigs normally when i play it from a keyboard that passes thru the mpc. When i try recording a sequence on the mpc with the keyboard and then play it back, it only responds to a few very rare notes. I even tried taking out the unipulse and the mpc of my setup, hooked it up to a power ou...
by APiazu
Thu Nov 01, 2018 4:19 pm
Forum: Tubbutec
Topic: Unipulse Roland TR-33 and Yamaha MR10 - some trig problems
Replies: 18
Views: 2005

Unipulse Roland TR-33 and Yamaha MR10 - some trig problems

Heya - enjoyed working with the unipulse mod and all works like a charm. So i wanted to post you some pics and some words on the process to share for the community. I will write some more stuff on modding the MR10 as well, upload some sounds from it an soso.. But for now you get the roland stuff + s...
by APiazu
Thu Nov 01, 2018 4:04 pm
Forum: Music Tech DIY
Topic: The 2018 Show Us Your DIY Builds Thread
Replies: 840
Views: 66121

@soup - wow!!!
by APiazu
Thu Nov 01, 2018 3:54 pm
Forum: Music Tech DIY
Topic: The 2018 Show Us Your DIY Builds Thread
Replies: 840
Views: 66121

uhh

Unipulse from tubbutec in a Roland TR-33 and Yamaha MR10 - with a breakout box that contains some potentiometers controlling some pitch, decay and filter various sounds. The unipulse mod is super cool - and it was quite handy to work with!

Go to advanced search