Search found 19 matches

by matjinks
Thu Jan 16, 2020 1:08 am
Forum: Music Tech DIY
Topic: [ORDER] Euclidean Circles - LEDs with rhythm
Replies: 761
Views: 60409

ratcheting?

Hi There, I love my EC and switches, but one thing I would really love to see implemented in a future software update would be Ratcheting, its the one thing that makes me consider selling my EC for another trigger module, or at least buy another module along side EC which would be annoying for $$ an...
by matjinks
Thu Sep 19, 2019 12:42 pm
Forum: Music Tech DIY
Topic: Freq Central System X Envelope peculiar Decay issue
Replies: 20
Views: 1265

Hi, Just so you know, the 5 pins for the pots, allow 9mm ones using the 3 inner holes and 16mm ones use the two outer and centre holes. The two outer holes are connected together. Would have caused a problem if you connected the case of the pot to either of them unless it was a 0V connection. The c...
by matjinks
Thu Sep 19, 2019 10:14 am
Forum: Music Tech DIY
Topic: Freq Central System X Envelope peculiar Decay issue
Replies: 20
Views: 1265

First of all, I don't really see any obvious mistakes. Except for the pots. They look really messy and you should clean these solder blobs up. It looks like there is a connection between the left and the middle pin on the rightmost pot. Did you try to swap the LF351 with a TL071? Did you use BC547 ...
by matjinks
Thu Sep 19, 2019 9:55 am
Forum: Music Tech DIY
Topic: Freq Central System X Envelope peculiar Decay issue
Replies: 20
Views: 1265

First of all, I don't really see any obvious mistakes. Except for the pots. They look really messy and you should clean these solder blobs up. It looks like there is a connection between the left and the middle pin on the rightmost pot. Did you try to swap the LF351 with a TL071? Did you use BC547 ...
by matjinks
Wed Sep 18, 2019 9:52 pm
Forum: Music Tech DIY
Topic: Freq Central System X Envelope peculiar Decay issue
Replies: 20
Views: 1265

Can you post a high res picture of your build please! There isn' much you can do wrong on that one... That's what I thought! I've successfully built Ornament and Crime and Temps Utile so i thought this would be a breeze, bu the build docs are minimal and the BOM is also not very detailed. Here's an...
by matjinks
Tue Sep 17, 2019 9:54 pm
Forum: Music Tech DIY
Topic: Freq Central System X Envelope peculiar Decay issue
Replies: 20
Views: 1265

Does anyone have a Mouser cart they can share for the System X ADSR ? I built one and it does not work, and I wanted to check I have the correct parts, I'm a newbie DIY'er, it would be a great help before I abandon the build.

many thanks,


m.
by matjinks
Tue Sep 10, 2019 10:29 am
Forum: Eurorack Modules
Topic: Expert Sleepers Disting Mk4
Replies: 1741
Views: 157434

Disting MK4 still waiting

Been waiting since June 7th!!! for an order from Vintage king for a Disting MK4!!!!!!! keep being told a new delivery date and now they say there is radio silence? is it just Vintage King? are other people getting units from elsewhere? are there any Distings for sale in the U.S (echo)
by matjinks
Wed Jul 17, 2019 3:02 pm
Forum: Eurorack Modules
Topic: Expert Sleepers Disting Mk4
Replies: 1741
Views: 157434

Disting order push back

Hi guys, anyone have any idea what’s going on with the Disting Mk 4 orders, I’ve been waiting for a couple of months from Vintage King and now today received an email saying another 5-6 weeks! Anybody else waiting and waiting and waiting, I see perfect Circuit is also waiting delivery. Frustrating, ...
by matjinks
Fri Jun 28, 2019 7:22 pm
Forum: Music Tech DIY
Topic: temps_utile / 6 x clock generator [build thread etc]
Replies: 767
Views: 51107

^ Yep, you got it. u dont have to change anything for the DAC out to be on, that's the default state. The CLK4 out very well may be as well so you only have to switch the jumper Strangely enough I am still not getting anything from no 4 out even with the DAC enabled, everything else works on the mo...
by matjinks
Fri Jun 28, 2019 2:02 pm
Forum: Music Tech DIY
Topic: temps_utile / 6 x clock generator [build thread etc]
Replies: 767
Views: 51107

^ Yep, you got it. u dont have to change anything for the DAC out to be on, that's the default state. The CLK4 out very well may be as well so you only have to switch the jumper Strangely enough I am still not getting anything from no 4 out even with the DAC enabled, everything else works on the mo...
by matjinks
Thu Jun 27, 2019 11:15 am
Forum: Music Tech DIY
Topic: temps_utile / 6 x clock generator [build thread etc]
Replies: 767
Views: 51107

Re: Temps Utile DAC and out 4 not working?

Hi There, I just finished a Temps build and everything except out 4 is working, any ideas? also what is the DAC jumper for and which legs should be jumped to do what exactly? I cannot find any info on the DAC jumper in build info or in use must be an oversight? Thanks for help, Mathew. > also what ...
by matjinks
Thu Jun 27, 2019 8:21 am
Forum: Music Tech DIY
Topic: Mutable Veils parts PCB number list
Replies: 2
Views: 475

cygmu wrote:This spreadsheet from the Mutable Instruments github has them:
https://github.com/pichenettes/eurorack ... Veils.xlsx

Thankyou! I couldn’t find it!
Cheers!
by matjinks
Wed Jun 26, 2019 9:16 pm
Forum: Music Tech DIY
Topic: temps_utile / 6 x clock generator [build thread etc]
Replies: 767
Views: 51107

Temps Utile DAC and out 4 not working?

Hi There, I just finished a Temps build and everything except out 4 is working, any ideas? also what is the DAC jumper for and which legs should be jumped to do what exactly? I cannot find any info on the DAC jumper in build info or in use must be an oversight?

Thanks for help,

Mathew.
by matjinks
Wed Jun 26, 2019 8:53 pm
Forum: Music Tech DIY
Topic: Mutable Veils parts PCB number list
Replies: 2
Views: 475

Mutable Veils parts PCB number list

Hi There, I am trying to find the Veils parts list which corresponds to the PCB numbering layout, I can find plenty of BOM's online but no numbered parts list, I usually build from a list, do all the resistors first then caps and work up in size, building from the PCB layout is a lot slower any-one ...
by matjinks
Wed May 08, 2019 8:32 pm
Forum: Eurorack Modules
Topic: combining gates with passive multiples
Replies: 65
Views: 12695

I don't see the output on your module. It's all inputs. With the diodes, you can't use it the same way as a passive multiple, but more like a mixer, with a defined output. Also, that circuit won't do for audio, the diodes only pass positive voltages, but audio is bipolar, obviously. Last but not le...
by matjinks
Wed May 08, 2019 6:17 pm
Forum: Eurorack Modules
Topic: combining gates with passive multiples
Replies: 65
Views: 12695

Hey there, I just built a switched multiple using the 1N4148 Diodes from Mouser and I can't get it to work! If I swap out the diodes for wire then it works but when I add the diodes in it stops working! I've tried turning the diodes round and still nothing. Maybe I have the wrong diode type? the Mou...
by matjinks
Sun Apr 07, 2019 1:44 pm
Forum: Eurorack Modules
Topic: Make Synths Not War String Theory midi in poly arp
Replies: 0
Views: 755

Make Synths Not War String Theory midi in poly arp

Hi There, Newbie question, I just picked up a Make Synths Not War String Theory poly module based on the solina string machine. It's midi in only in 3u, I've been trying to work out what to use to trigger it, I was thinking a Disting MK 4 with the midi breakout, and triggering the Disting with maybe...
by matjinks
Tue Nov 06, 2018 6:32 pm
Forum: Music Tech DIY
Topic: [pcb+panel] CEM3340 VCO for eurorack (8hp)
Replies: 94
Views: 16571

HI, Does anyone have a Mouser cart for this build they can share? this is my first SMD build and I don't want to mess up the ordering of parts.

Cheers,

Mat
by matjinks
Tue Nov 06, 2018 6:28 pm
Forum: Eurorack Modules
Topic: Timo Rozendal CEM3340 VCO - a shoutout!
Replies: 2
Views: 717

Hi There, any chance you can share a Mouser BOM for the CEM3340 build? I just purchased a PCB panel set as a newbie DIY and I don't want to mess up the parts ordering.

Cheers,

Mat.

Go to advanced search