yes.. its must have for some users that cant in years upload by WAV file firmware..

Altitude909 wrote: ↑

Fri Apr 24, 2020 2:35 pm

Different LEDs in clouds, sounds like your LED switch may be in backwards (or some other fault)

I find that at Clouds one pin of the IC for led - not have working contact. Now all fixed and work.

Can anybody who have Parasites firmware uploaded in the module... just to read firmware by STLink Utility and download firmware into HEX? I not find solution to upload into TIDES - parasites firmware... And dream about Parasites hex!!! May be this is really possible to read by STLink Utility firmwar...

Yes.. its my fault.. I check my basket and find that LEDs with cathode at mid pin. :party: So.. bigger problem now to remove this leds and install new.. No ways to fix problem without leds change? ps: now I understand why second module of MI clone also too not run leds.. )) use same leds. Its clouds...

Antumbra Knit (PLAITS) Leds not working, no reaction. All other work nice. I check leds with multimeter - all of them working. I test LEDS IC, check lines too STM32.. One thing I found, mid pin of leds on files - are +3V3.... And legs green and red.. in Eagle files. But leds working only as: Mid leg...

hm, not understand what need to change.
Parasites GIT include silence folders
- stm_audio_bootloader
- stmlib
- avr_audio_bootloader
- avrlib
- avrlibx

Im just copy tides folder. But what I need to change in files, or where I need to get this files?

3 days fight with WAV playing. I don't know what I not try now.. - I use MacBook Pro output with VLC /QuickTime/WuickLook players with various volume. Set Tides FM in low/mid/hi positions.. I regularly have a nice start in 3-4 seconds, but after it - red leds. - I try to use Thundebolt dock Output, ...

If you ask me why I cant have results with WAV playing: - I use MacBook Pro output with VLC /QuickTime/WuickLook players with various volume. Set Tides FM in low/mid/hi positions.. I regularly have a nice start in 3-4 seconds, but after it - red leds. - I try to use Thundebolt dock Output, same prob...

I have a problem with uploading Alternative firmware by WAVs 3 days I try to upload WAV by Parasites into Clouds, Warps, Tides. If somebody interesting, I resolved it in another way, partly. I get at Parasites git source files. https://github.com/mqtthiqs/parasites And just insert them into mutable-...

I build and run SMOG antumbra (Clouds) All 4 LEDs not react to changes by press 2 buttons - them all light yellow and not change color or blink. As I listen (not know how module must work) no changes with buttons too. Problem that I have on hands A50K pot by Bourns with 6-legs linear. BOM said that ...

I change in KNIT TLC59281 (IC2) to new one - its not help.
All Mode leds still not working..

Thank You for HEX. But now I not understand where to connect programmatic pins on board)) pins marked at J1 and J2 for other connections... Already buy UNO to program ICs with DIP slots. Try to build it at near time.

Thank You. Found localised version of UNO in my country.
Does I need to use boot loaded versions of ATMega?

Hi. Find interesting DIY midi synth https://moroccodave.com/2017/09/13/diy-modular-synth-solina-string-synth/ I open in Arduino solina_code.ino But can't convert it into HEX to upload with AVISPmkII. Because have error: solina_code:24:18: error: MIDI.h: No such file or directory compilation terminat...

no problems with all ferrite beads - in KNIT by ant umbra its F1-F4. try to reflow them, not help.
may be tlc59281 really fault. need new one to test

yes - pins 2-4 repeat pictures from data sheet. there all right.
I checkin R3 and yes its a 10.01k as in bom 10kohm.
Im already reflow all pins of IC2, contacts of R3, its not help

I have many modules from Antumbra. I see at MI devices, other devices that you redesigned. And need to say that symbols on panels is unclear to understand. Its can be good option to create for every module DOC with additioal text to pots, fades, etc - what is it... All MI have normal abbreviatures, ...

Are pins 2,3 and 4 getting control signals? These will be a series of pulses and you’ll need to observe these with an oscilloscope. back to Plaits not working legs.. I check now with oscilloscope IC2 pins 2,3,4.... And found that 2 and 3 pin have nice pulses. But pin4 have very very little changes....

its b10k. I already think about problematic pot and change it to another b10k, not help. some problems with ground / pot range.. using Trim not help ps: touch sensitive ground problem active only if Freq pot in main range, if in end of range - input sound (res=max, oscillator mode) work normal. pps:...

Have another problem... RIPPLES clone - Wavelet. In all 3 modes - Frequency cutoff have very short working range - at final point of knob I can listen very fast changes in ultra small moves of knob at his end. Before end position in main range - activity of this knob not change sound... When I touch...

Try the calibration procedure Its not help. Nothing changed. _____________ :bang: :bang: :bang: I forgot that I install Parasites Warps firmware. Im read page of it and find: Warning : Right after updating the module, you will be in a different mode than the one you are used to, and you might not r...

Already build Warps clone (Jakplugg Twists) > PCB and panel image < Author not shared rear side of PCB.. https://github.com/jakplugg/twist Have problems with ALGO knob. It work only in limited knob range (from 1 to 5 o'clock). Change sound and LED colour only in this range. from 7 to 1 o'clock no re...

Thanks! But if this for connection variant - what it do? At default it must be untouched? And if I soldering this pads - what changed?

Also not understand with LEDs orientation.
PS: flat side at bottom for all LEDs, exclude 2 bottom leds (legs reversed)!!!
Module working =)

Now I work on Pique by JakPlugg (Mutable Peaks) It have BOM, but I have question about SJ1 (around c17). BOM available for 1.0 version and not include SJ1. Not understand what version of Pique I have - at STM32 side - 0.9 Pique. At other side - cc-by-so. Emilie Gillet , 2015, v3. JakPlugg have only ...

I use two Trimmers. I find needed positions to save signal level. DIY kits need some basic info about this for beginners. Cool! Its been easy fix