Search found 13 matches

by Tim010
Fri May 22, 2020 10:13 am
Forum: Eurorack Modules
Topic: ALM BUSY CIRCUITS ‘DIN-SYNC ADAPTOR CABLE’
Replies: 13
Views: 555

Re: ALM BUSY CIRCUITS ‘DIN-SYNC ADAPTOR CABLE’

Hé Guys, thanks for all the support. It was the cable. Doepfer DIN-SYNC cable did the job. I run in to some others problems. I was multiplying the clock and reset like crazy to go to al my modules. Some of some of modules take a different approach to off when to rest. You can see it as a latency iss...
by Tim010
Fri May 08, 2020 4:07 am
Forum: Eurorack Modules
Topic: ALM BUSY CIRCUITS ‘DIN-SYNC ADAPTOR CABLE’
Replies: 13
Views: 555

Re: ALM BUSY CIRCUITS ‘DIN-SYNC ADAPTOR CABLE’

If you already have something to convert MIDI clock into DIN SYNC, you need to make sure it is actually sending a signal on the DIN SYNC end. You can check this by looking at the LED of your kenton D-Sync. Also looking at the adapter, you need a proper DIN SYNC cable to connect to it, not a MIDI ca...
by Tim010
Thu May 07, 2020 3:33 pm
Forum: Eurorack Modules
Topic: ALM BUSY CIRCUITS ‘DIN-SYNC ADAPTOR CABLE’
Replies: 13
Views: 555

Re: ALM BUSY CIRCUITS ‘DIN-SYNC ADAPTOR CABLE’

If you have a Miami, try to use it as the master clock with Pamela’s Workout. If you get it working, then you know you have a good cable. You could also try clocking the Miami with the PW. Then, try clocking the Miami with Ableton. Eventually, you should isolate the problem. Maybe the cable you had...
by Tim010
Thu May 07, 2020 4:31 am
Forum: Eurorack Modules
Topic: ALM BUSY CIRCUITS ‘DIN-SYNC ADAPTOR CABLE’
Replies: 13
Views: 555

Re: ALM BUSY CIRCUITS ‘DIN-SYNC ADAPTOR CABLE’

I've found that 3.5mm to 5 pin adapter cables for midi are not universal. For example the one that came with my Faderfox controller doesn't work with my friend's SQ-1 and vice versa. It may be that this is only supposed to work with the PNW expander and may not be compatible with anything else. Thi...
by Tim010
Wed May 06, 2020 4:12 pm
Forum: Eurorack Modules
Topic: ALM BUSY CIRCUITS ‘DIN-SYNC ADAPTOR CABLE’
Replies: 13
Views: 555

ALM BUSY CIRCUITS ‘DIN-SYNC ADAPTOR CABLE’

Hé Guys, I bought my self a ALM BUSY CIRCUITS ‘DIN-SYNC ADAPTOR CABLE’. With the idea to clock my modular with abelton or visa versa. The problem is that i can not get it working. Some one here who can help me? This is what i have avaible: MacBook+ableton, m-audio usb midi in/out, kenton d-sync and ...
by Tim010
Mon May 20, 2019 10:02 am
Forum: Eurorack Modules
Topic: Doepfer Quantizer problems!
Replies: 7
Views: 398

I noticed the jumper is not properly put on the pins. On this picture you can see the jumper connecting 2 of the pins: http://www.doepfer.de/A100_pictures/doepfer_a156.jpg In that configuration the top quantizer does not follow the settings from the bottom quantizer, for that behaviour the jumper s...
by Tim010
Mon May 20, 2019 4:05 am
Forum: Eurorack Modules
Topic: Doepfer Quantizer problems!
Replies: 7
Views: 398

I noticed the jumper is not properly put on the pins. On this picture you can see the jumper connecting 2 of the pins: http://www.doepfer.de/A100_pictures/doepfer_a156.jpg In that configuration the top quantizer does not follow the settings from the bottom quantizer, for that behaviour the jumper s...
by Tim010
Sun May 19, 2019 2:36 pm
Forum: Eurorack Modules
Topic: Doepfer Quantizer problems!
Replies: 7
Views: 398

Re: Doepfer Quantizer problems!

Bottom par works normal. Top part doens't let any pitch true. Check the jumper at the back ... should be either connecting the 2 upper contacts (to follow the settings from the bottom quantizer) or the 2 lower contacts. If no jumper,maybe the top quantizer doesn't work. Otherwise check if the chips...
by Tim010
Sun May 19, 2019 2:32 pm
Forum: Eurorack Modules
Topic: Doepfer Quantizer problems!
Replies: 7
Views: 398

Re: Doepfer Quantizer problems!

Bottom par works normal. Top part doens't let any pitch true. Check the jumper at the back ... should be either connecting the 2 upper contacts (to follow the settings from the bottom quantizer) or the 2 lower contacts. If no jumper,maybe the top quantizer doesn't work. Otherwise check if the chips...
by Tim010
Sun May 19, 2019 12:53 pm
Forum: Eurorack Modules
Topic: Doepfer Quantizer problems!
Replies: 7
Views: 398

Doepfer Quantizer problems!

Hi guys,

Got a problem. Bought a brand new doepfer quantizer. Bottom par works normal. Top part doens't let any pitch true. When i use the transpose in the bottom part. The top part lets the quantized pitches true. What can it be?
by Tim010
Tue Feb 12, 2019 4:43 am
Forum: Eurorack Modules
Topic: Help. Pitch information is giong true powerbus
Replies: 4
Views: 333

Help. Pitch information is giong true powerbus

hello! I am new to the concept of modulair. This communitie is helping a lot te go true the first steps and hope you guys can help me. After buying my first modulair it's no suprise a both a few more :hihi: Leaning on steevio's concept explained to me by the vids of mylar i bought two ladic s180 seq...
by Tim010
Tue Feb 12, 2019 4:24 am
Forum: Eurorack Modules
Topic: Euro Modular Synth ReadMe.1st
Replies: 291
Views: 116176

:tu: good post. Thanks
by Tim010
Tue Feb 12, 2019 4:22 am
Forum: Eurorack Modules
Topic: Modular Synth Basics! Cases, power, modules, CV?! Come in :)
Replies: 402
Views: 90915

:tu:

Go to advanced search