Search found 124 matches

by Kosmikos
Thu Feb 25, 2021 3:07 am
Forum: Eurorack Modules
Topic: Erica Synths Black Sequencer
Replies: 466
Views: 23206

Re: Erica Synths Black Sequencer

How are you folks finding the modulation workflow on this (setting up LFOs, envelopes, CV sequencing)? Is it fun to play around with and try different options? From videos it looks a slight (not huge) faff to set up modulation, but I thought the same about Pam's and was completely wrong. Setting mo...
by Kosmikos
Wed Feb 24, 2021 4:12 pm
Forum: Eurorack Modules
Topic: Mutable Instruments Blades
Replies: 172
Views: 11797

Re: Mutable Instruments Blades

Rolandish sounds good to me, although OBish would be even better being an SVF and all. Take a look at the AJH Gemeni 2412 if you haven't done so already. I did actually, thanks, and it sounds great. But apparently it doesn’t agree with my Intellijel case as the outputs can get very noisy when runni...
by Kosmikos
Mon Feb 22, 2021 5:29 pm
Forum: Eurorack Modules
Topic: Oscillators
Replies: 9
Views: 264

Re: Oscillators

I’ve been pleasantly surprised by my Pico Voice. Smaller and cheaper than Plaits but still interesting enough and plenty of flavours. Plaits’ percussion modes are quite useful though. 4MS Ensemble looks interesting too. I got a Chainsaw, not quite the same thing, but also smaller and needs more exte...
by Kosmikos
Sun Feb 21, 2021 4:29 pm
Forum: Eurorack Modules
Topic: Erica Synths Black Sequencer
Replies: 466
Views: 23206

Re: Erica Synths Black Sequencer

You can try upgrading to the latest firmware see if that helps, but to be honest it sounds like you need to create a support ticket.
Good luck, hopefully it’ll get resolved soon.
by Kosmikos
Sat Feb 20, 2021 4:44 pm
Forum: Eurorack Modules
Topic: Cure for GAS?
Replies: 157
Views: 4065

Re: Cure for GAS?

STOP READING MUFFS!!! :foul: You’re trying to stay sober while spending your free time chatting with thousands of alcoholics, who only talk about how awesome alcohol is all day long. :hihi: This. :nod: Probably best to avoid youtube and unsubscribe from the shop’s newsletters too. Just got knowledg...
by Kosmikos
Sat Feb 20, 2021 10:36 am
Forum: Eurorack Modules
Topic: Dual xfade - 4 HP dual crossfader
Replies: 56
Views: 5085

Re: Dual xfade - 4 HP dual crossfader

I really really love my Dual Xfade, I wouldn’t do without one, everything I hoped and more. Had a cracking patch with two oscillator saws on A and B playing a different note and the sine from oscillator A patched to the Xfade CV after a bit of mangling through a logic gate, all through 12dB resonant...
by Kosmikos
Fri Feb 19, 2021 9:52 am
Forum: Eurorack Modules
Topic: Good and Bad of Modular Manufacturers
Replies: 86
Views: 3719

Re: Good and Bad of Modular Manufacturers

I had a good experience with clicksclocks.de, good communication and their rack rails and ears look good too.
by Kosmikos
Fri Feb 19, 2021 9:48 am
Forum: Eurorack Modules
Topic: 19" Rack Ears for 1U Eurorack
Replies: 9
Views: 815

Re: 19" Rack Ears for 1U Eurorack

Clicks&Clocks sell 1U frames (with either flat side panels or rack ears) for the Intellijel format. https://clicksclocks.de/tag/1u-tiles Woohoo! Finally , a solution to the seemingly ever-so-elusive 1U Intellijel problem: They make so many great 1U modules, but nowhere to put them. Problem SOLVED! ...
by Kosmikos
Fri Feb 19, 2021 9:16 am
Forum: Eurorack Modules
Topic: Mutable Instruments Beads (Clouds 2)
Replies: 805
Views: 45471

Re: Mutable Instruments Beads (Clouds 2)

pelang wrote:
Fri Feb 19, 2021 5:40 am
-I wish there were no mini pots. I use them the same amount than the “main” pots.
I’ve just tried these:
https://www.thonk.co.uk/shop/tall-trimmer-toppers/

They fit pretty well on my Plaits and Stages, and makes my Erica Synths Pico modules look neat, so I might order some more for my Beads.
by Kosmikos
Fri Feb 19, 2021 7:26 am
Forum: Eurorack Modules
Topic: Deckards Voice
Replies: 2
Views: 218

Re: Deckards Voice

I obviously can’t use the search. Getting ready for
:sstorm:
by Kosmikos
Fri Feb 19, 2021 7:07 am
Forum: Eurorack Modules
Topic: Deckards Voice
Replies: 2
Views: 218

Deckards Voice

I couldn’t find a thread about this, is anyone else lusting after this, or 8 of them? https://black-corporation.com/product/deckards-voice/ DECKARD’S VOICE DECKARD’S VOICE is an entry level semi-modular synth for eurorack systems. Sharing the same paradigm and circuit as its bigger brother DECKARD’S...
by Kosmikos
Thu Feb 18, 2021 5:45 pm
Forum: Eurorack Modules
Topic: Reflashing Happy Nerding FX Aid
Replies: 20
Views: 679

Re: Reflashing Happy Nerding FX Aid

It doesn’t like it too loud. Try 50% volume of whatever you are trying. It’s kind of strange as I thought modular was 5-10V and line level output around 0.5V, but once you get the correct low volume, it works. I guess you are not old enough to have had a computer with cassette tapes, now that was ep...
by Kosmikos
Thu Feb 18, 2021 4:59 pm
Forum: Eurorack Modules
Topic: Mutable Instruments Beads (Clouds 2)
Replies: 805
Views: 45471

Re: Mutable Instruments Beads (Clouds 2)

Curious if anyone whose received their beads also nailed down a blades? I missed the first batch on Blades, and I’m still waiting for my preorder. :waah: I thought I’d wait a bit on Beads, granular was on my radar, but I seriously need to control my GAS. Then within the general excitement, being ou...
by Kosmikos
Wed Feb 17, 2021 3:09 am
Forum: Eurorack Modules
Topic: Noise Engineering Mimetic Digitalis
Replies: 241
Views: 27018

Re: Noise Engineering Mimetic Digitalis

On Chainsaw the tuning encoder uses one press as a switch back and forth from fine to coarse, with an LED showing which mode you’re in. It’s a lot more useful. Pushing and rotating on MD is exhausting. I came to the conclusion that shredding is much easier to use to get to the desired CV. This said ...
by Kosmikos
Tue Feb 16, 2021 1:15 pm
Forum: Eurorack Modules
Topic: ThreeTom Modular - Steve's MS-22 Dual VCF (4HP)
Replies: 67
Views: 3845

Re: ThreeTom Modular - Steve's MS-22 Dual VCF (4HP)

Edit: removed double post.
by Kosmikos
Tue Feb 16, 2021 1:15 pm
Forum: Eurorack Modules
Topic: ThreeTom Modular - Steve's MS-22 Dual VCF (4HP)
Replies: 67
Views: 3845

Re: ThreeTom Modular - Steve's MS-22 Dual VCF (4HP)

Is the DIY kit SMD or Through Hole?
I still haven’t broken my SMD virginity, so will probably wait a bit for a ready made version in this case.
Edit: It looks like the difficult bits are already soldered.
by Kosmikos
Tue Feb 16, 2021 10:45 am
Forum: Eurorack Modules
Topic: Going out and then in again?
Replies: 8
Views: 284

Re: Going out and then in again?

Ahah, and me who always thought a pedal interface was to plug a foot controller onto your eurorack... :doh:
by Kosmikos
Tue Feb 16, 2021 4:36 am
Forum: Eurorack Modules
Topic: FX AID - multi audio effect module
Replies: 1779
Views: 144177

Re: FX AID - multi audio effect module

xcc wrote:
Sun Feb 14, 2021 8:10 am
Yeah, the FX Aid really should come in a two pack.
I’ve just ordered my 3rd one for my new overflow rack. I guess I’ll also need a fourth one for the overflow of the overflow. :hihi:

At which number do we get the golden Happy Nerding sticker and a free personalised reverb algorithm? ;)
by Kosmikos
Tue Feb 16, 2021 4:31 am
Forum: Eurorack Modules
Topic: FX AID - multi audio effect module
Replies: 1779
Views: 144177

Re: FX AID - multi audio effect module

Voltcontrol wrote:
Sun Feb 14, 2021 5:37 am
guidocbt wrote:
Sun Feb 14, 2021 5:26 am
Hi,
In fx aid can I apply 2 effects together and modulate them? For example reverb + delay.

Thanks
The XL version has CV ins for all three knobs and some of the effects are combination effects.
Not to forget that the non XL version as also one assignable CV for modulation duty.
by Kosmikos
Mon Feb 15, 2021 1:51 pm
Forum: Eurorack Modules
Topic: Intellijel something new feb 15 2021
Replies: 105
Views: 5797

Re: Intellijel something new feb 15 2021

1n wrote:
Mon Feb 15, 2021 1:18 pm
$579, an Intellijel person said in the chat - wait and see the cost in the UK. If accurate this is great value.
£559 on ElevatorSound:
https://elevatorsound.com/product/intel ... er-module/

+£69 for the gate expander.
by Kosmikos
Fri Feb 12, 2021 2:00 pm
Forum: Eurorack Modules
Topic: ThreeTom Modular - Steve's MS-22 Dual VCF (4HP)
Replies: 67
Views: 3845

Re: ThreeTom Modular - Steve's MS-22 Dual VCF (4HP)

Sadly, it’s a bit more complicated than that. Why am not surprised? :waah: I’m really glad you’ve already been looking into it though. Much respect to you for juggling with it all. I might just register a third time to your mailing list, just to make sure that I won’t miss on the next batch. :tu:
by Kosmikos
Fri Feb 12, 2021 10:38 am
Forum: Eurorack Modules
Topic: ThreeTom Modular - Steve's MS-22 Dual VCF (4HP)
Replies: 67
Views: 3845

Re: ThreeTom Modular - Steve's MS-22 Dual VCF (4HP)

I'll be opening up preorders for the April batch tomorrow, I am really disappointed that you are not taking orders from the UK, but I understand the reason. I dearly hope that they will be available to UK customers at some future point :waah: I’m working on it, hopefully I’ll be able to ship to the...
by Kosmikos
Wed Feb 10, 2021 4:03 pm
Forum: Eurorack Modules
Topic: Sequencer less than 30hp?
Replies: 71
Views: 1735

Re: Sequencer less than 30hp?

I’ve just got a DIY Robaux LL8, not sure whether I needed another sequencer, but it seemed like a good idea at the time :hihi: 8 triggers in 10HP! Little brother to the SW16 which is also only 20HP. If I manage a working build, I’ll then need to buy some more things to trigger as I’m little short on...
by Kosmikos
Mon Feb 08, 2021 3:51 am
Forum: Eurorack Modules
Topic: Mutable Instruments Blades
Replies: 172
Views: 11797

Re: Mutable Instruments Blades

Still waiting for mine in preorder. Don’t make the same mistake, I’ve waited too long to make the jump. :doh: Rolandish sounds good to me, although OBish would be even better being an SVF and all. The thing that I’m most looking forward to is the mode CV. I like radical changes in filter modes, and ...
by Kosmikos
Fri Feb 05, 2021 5:36 am
Forum: Eurorack Modules
Topic: Generative modules for 7u 104hp
Replies: 29
Views: 1286

Re: Generative modules for 7u 104hp

I’ve just got Kinks, I bought it to help me doing a bit more generative stuff without sacrificing too much HPs. I’m planning to use its S&H along with my Mimetic Digitalis that can store 16 variations of 4 CVs and replay them in random order. I’m also slowly awaking to the power of my WMD Arpitecht ...

Go to advanced search