PAIA rack screws??

Blacet, Metalbox, Synthasonic, PAiA and the rest.... a frac frenzy!

Moderators: Joe., lisa, luketeaford, Kent

Post Reply
acidblue
Common Wiggler
Posts: 68
Joined: Sun Sep 12, 2010 9:50 pm
Location: The Darkside

PAIA rack screws??

Post by acidblue » Thu Feb 14, 2019 2:05 am

I order some 18-8 screws,(M3x8 with 0.5 thread), thinking they would fit my PAIA rack i just bought, but they dont they're too large
https://www.mcmaster.com/91292a112

What size should I be using for a PAIA rack.
Top
User avatar
fracmonkey
JB or not JB, that is the question.
Posts: 275
Joined: Sat Jan 23, 2010 4:16 pm

Post by fracmonkey » Thu Feb 14, 2019 12:55 pm

American screws! 4-40 x 1/4, self tapping. Phillips pan head.
Top
acidblue
Common Wiggler
Posts: 68
Joined: Sun Sep 12, 2010 9:50 pm
Location: The Darkside

Post by acidblue » Thu Feb 14, 2019 3:31 pm

Thank you.
Top
User avatar
chachi
Wiggling with Experience
Posts: 488
Joined: Fri Feb 22, 2013 11:50 am
Location: north portland, OR

Post by chachi » Thu Feb 14, 2019 4:10 pm

thank you, i wondered too.
Top
User avatar
Tubeampguy
Wiggling with Experience
Posts: 363
Joined: Sat May 02, 2009 10:14 am
Location: Long Beach, Ca USA

Re: PAIA rack screws??

Post by Tubeampguy » Sat Feb 23, 2019 11:04 pm

acidblue wrote:I order some 18-8 screws,(M3x8 with 0.5 thread), thinking they would fit my PAIA rack i just bought, but they dont they're too large
https://www.mcmaster.com/91292a112

What size should I be using for a PAIA rack.
I've found some Black Oxide 4/40 X 1/4 at https://www.fastenal.com/
I did have to order them and it took a week to get them.
:tu::blacet: :tu:
Top
Post Reply

Return to “Fractional Rack Modules”