Blacet ring mod functions

Blacet, Metalbox, Synthasonic, PAiA and the rest.... a frac frenzy!

Moderators: Joe., lisa, luketeaford, Kent

Post Reply
User avatar
Acid Mitch
Common Wiggler
Posts: 145
Joined: Fri Aug 16, 2013 8:52 am

Blacet ring mod functions

Post by Acid Mitch » Sat Jan 18, 2020 11:20 am

I bought a second hand Blacet ring mod and it came with switch position 3 not doing anything. The previous owner says it is broken. I have gave it to some one to fix and it would be handy to know what position 3 on the switch is supposed to do. Do any of you guys know what it does ?

User avatar
revtor
Dialing it in..
Posts: 1604
Joined: Sat Nov 29, 2008 10:31 am
Location: North Jerz

Re: Blacet ring mod functions

Post by revtor » Sat Jan 18, 2020 11:27 am

Changes the “geometry” of how the carrier cv modulates the internal sine oscillator .. 1 does less of this, 2 does more, and 3 is the most modulation. May need a scope to get more specific about the effect. It’ll definitely produce a different effect that in settings one and two. Probably very dependent on the signals that you were running through the module, Which may make it hard to determine if the function is operating properly. You have to be very methodical when checking these things out, and a scope will definitely help.
Fellow North Jersey Synthaholic

User avatar
Acid Mitch
Common Wiggler
Posts: 145
Joined: Fri Aug 16, 2013 8:52 am

Re: Blacet ring mod functions

Post by Acid Mitch » Sun Jan 19, 2020 8:09 am

Thanks :tu:

Rob_C
Wiggling with Experience
Posts: 486
Joined: Sun Jul 01, 2012 10:23 pm
Location: United States

Re: Blacet ring mod functions

Post by Rob_C » Tue Jan 28, 2020 8:05 am

Spam reported and deleted.

Post Reply

Return to “Fractional Rack Modules”