Blacet DSC2000 rev A Build

Blacet, Metalbox, Synthasonic, PAiA and the rest.... a frac frenzy!

Moderators: Kent, luketeaford, Joe.

Post Reply
Gandalf
Common Wiggler
Posts: 168
Joined: Thu Nov 29, 2018 8:59 pm
Location: Australia

Blacet DSC2000 rev A Build

Post by Gandalf » Wed Aug 19, 2020 11:43 pm

Hi,
Does anyone have a copy of the parts list, build guide and or schematic for a Blacet DSC2000 Rev A CHAOS? I have a PCB here to build for someone but can't find any build stuff

User avatar
diophantine
Super Deluxe Wiggler
Posts: 2353
Joined: Mon Jan 10, 2011 2:50 pm
Location: San Diego, CA, USA

Re: Blacet DSC2000 rev A Build

Post by diophantine » Thu Aug 20, 2020 9:01 am

I saw mine a couple days ago, so it must be near. Will dig it up after a work meeting...

User avatar
diophantine
Super Deluxe Wiggler
Posts: 2353
Joined: Mon Jan 10, 2011 2:50 pm
Location: San Diego, CA, USA

Re: Blacet DSC2000 rev A Build

Post by diophantine » Thu Aug 20, 2020 11:23 am

Ok, so I got confused, and forgot that the DSC didn't have a "no-Rev" version (or at least none I am aware of in Frac).

So mine is a Rev.B. I've still uploaded the parts list. I don't know what board changes were made between A and B - it may have just been something to remove support for the pushbutton switch.
Attachments
Blacet DSC Rev B Parts List
Blacet DSC Rev B Parts List
blacet_dsc_revb_parts.jpg (68.65 KiB) Viewed 245 times

Gandalf
Common Wiggler
Posts: 168
Joined: Thu Nov 29, 2018 8:59 pm
Location: Australia

Re: Blacet DSC2000 rev A Build

Post by Gandalf » Fri Aug 21, 2020 4:33 am

diophantine wrote:
Thu Aug 20, 2020 11:23 am
Ok, so I got confused, and forgot that the DSC didn't have a "no-Rev" version (or at least none I am aware of in Frac).

So mine is a Rev.B. I've still uploaded the parts list. I don't know what board changes were made between A and B - it may have just been something to remove support for the pushbutton switch.
Thanks, I will have look and see if the designators make sense with the PCB

User avatar
diophantine
Super Deluxe Wiggler
Posts: 2353
Joined: Mon Jan 10, 2011 2:50 pm
Location: San Diego, CA, USA

Re: Blacet DSC2000 rev A Build

Post by diophantine » Fri Aug 21, 2020 3:16 pm

Here's the Rev.B board drawing with designators.
Attachments
blacet_dsc_revb_board.jpg

Post Reply

Return to “Fractional Rack Modules”