Post pics of your euro setup!

Cwejman, Livewire, TipTop Audio, Doepfer etc... Get your euro on!

Moderators: Kent, luketeaford, Joe., lisa

Post Reply
otnemem
Common Wiggler
Posts: 171
Joined: Tue May 01, 2018 1:05 pm

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by otnemem » Sun Jan 05, 2020 1:37 pm

Here’s my current set up. I recently upgraded from a 6U 84HP rig to a new 7U Intellijel case and am really loving this. Have a few blanks for now but will take my time before wrapping it all up.
Attachments
D089D29F-2271-46D1-B3BD-CCC2B40855EA.jpeg
D089D29F-2271-46D1-B3BD-CCC2B40855EA.jpeg (1.04 MiB) Viewed 1699 times

User avatar
kineticturtle
Wiggling with Experience
Posts: 265
Joined: Sun Apr 13, 2014 9:15 am
Location: Santa Rosa, CA

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by kineticturtle » Sun Jan 05, 2020 1:53 pm

I've spent time away from music but now I'm diving back into writing, doing a song a week this year for Weekly Beats. In accordance with that, I've finally filled out my li'l Euro case. It's mostly for modification of existing sounds, but can also be a great little noise or basline box or even a simplistic or generative groovemaker. Gardevoir approved.
IMG_3225 (1).JPG
IMG_3225 (1).JPG (1.05 MiB) Viewed 1693 times
FS/T: Various Euro and ConVertor+
I stream music making and LEGO on my Twitch channel.
Maths is hard, let's go shopping.

rupa
Common Wiggler
Posts: 74
Joined: Mon Jun 27, 2016 2:24 pm

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by rupa » Sun Jan 05, 2020 10:12 pm

Image

DukeOfPrunes
Common Wiggler
Posts: 93
Joined: Tue Nov 28, 2017 6:13 am
Location: Toronto

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by DukeOfPrunes » Sun Jan 05, 2020 11:10 pm

2 years in...
Attachments
IMG_1980.jpg
IMG_1980.jpg (1.05 MiB) Viewed 1532 times
IMG_1979 (1).jpg
IMG_1979 (1).jpg (931.41 KiB) Viewed 1614 times
Last edited by DukeOfPrunes on Mon Jan 06, 2020 10:29 am, edited 2 times in total.

User avatar
Bartelby
Common Wiggler
Posts: 195
Joined: Mon May 07, 2018 12:40 pm
Location: Penperlleni, Sunny Wales
Contact:

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by Bartelby » Mon Jan 06, 2020 9:05 am

Before christmas I started to get the rails and such for a new case, as I'd run out of room in my 9U 84hp case. Over the weekend I assembled a temporary 10U 126hp rack, now I can order the wood to build the actual case. In the mean time I can move modules about and see where they work best. I do have 3 modules left to put in the new rack; A Per|Former, an SSH (panels in rack) and a filter. The DX-11 is on a set of drawers with castors, so I can push it under the table.
Today I did a big tidy up of my space, so took the opportunity to take a photo.
IMG_9107.JPG
IMG_9107.JPG (1.6 MiB) Viewed 1552 times

User avatar
behndy
Super Deluxe Wiggler
Posts: 1663
Joined: Mon Oct 07, 2013 12:05 am
Location: East Bay, Cali
Contact:

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by behndy » Mon Jan 06, 2020 4:22 pm

exper wrote:
Sat Jan 04, 2020 7:14 pm
NIce setup Audidaan!

I haven't posted my system in ages. This is in it's new, reduced size/format. I used to have 14u 84hp + 12u 104hp cases full, but I've sold a bunch to make a more coherent system that has a smaller footprint. If anyone wants to see the modules, my modulargrid link is in the bottom.

IMG_0141.jpg
this is a beautiful setup suh. curious, with the Palettes, do you use the 1/2u top row very often? i love the idea of a Palette or two, but every time i fill one on ModGrid i realize the top row and 1u's do nothing for me.
music, noise, in progress silliness - http://www.youtube.com/c/behndy

User avatar
exper
Super Deluxe Wiggler
Posts: 10378
Joined: Fri Apr 22, 2011 6:41 am
Location: Southern NJ

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by exper » Mon Jan 06, 2020 6:10 pm

behndy wrote:
Mon Jan 06, 2020 4:22 pm

this is a beautiful setup suh. curious, with the Palettes, do you use the 1/2u top row very often? i love the idea of a Palette or two, but every time i fill one on ModGrid i realize the top row and 1u's do nothing for me.
So, initially I was using my first palette as a standalone drum machine, which utilized the audio jacks and midi input. But now that I set them as control skiffs, the Buffered mults get used for pitch CV often, and on the one, the midi in goes to the 1U midi module. Supposedly the 1uO_C has an adapter that will be available soon to connect it to the pallette midi input, so eventually I'll move that to the other palette case. SO the only thing not currently used are the 1/4 I/O jacks.
_____________________________________________________________________________________________
FS/T: Goike 12u/104hp Bamboo/Aluminum Folding Case

Image

User avatar
ggillon
Veteran Wiggler
Posts: 540
Joined: Wed Feb 28, 2018 7:21 am
Location: Belgium

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by ggillon » Wed Jan 08, 2020 3:36 pm

WMD Crater has joined the team! :evil:

Image
Last edited by ggillon on Thu Jan 09, 2020 3:35 am, edited 1 time in total.

doubleohno
Learning to Wiggle
Posts: 15
Joined: Fri Jan 13, 2017 2:10 am

Re:

Post by doubleohno » Wed Jan 08, 2020 5:21 pm

doubleohno wrote:
Thu Feb 28, 2019 10:59 pm
First time filling up a case! It feels...really good! My own little shared system of sorts :)

Image
Come quite a ways over the last year.
AD8B6704-4935-43DC-B7E3-3FF8B57E1C3C.jpeg
AD8B6704-4935-43DC-B7E3-3FF8B57E1C3C.jpeg (1.35 MiB) Viewed 1278 times

User avatar
Chopper
Ultra Wiggler
Posts: 761
Joined: Tue Oct 13, 2015 6:17 am
Location: London

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by Chopper » Sat Jan 11, 2020 12:53 am

Bignorthumbrian wrote:
Fri Jan 03, 2020 3:17 pm
Currently...
I run a 12U mutable case as well, where the only intruder is a Pamela.... They really love each other for sure....

User avatar
behndy
Super Deluxe Wiggler
Posts: 1663
Joined: Mon Oct 07, 2013 12:05 am
Location: East Bay, Cali
Contact:

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by behndy » Sat Jan 11, 2020 1:11 am

exper wrote:
Mon Jan 06, 2020 6:10 pm
behndy wrote:
Mon Jan 06, 2020 4:22 pm

this is a beautiful setup suh. curious, with the Palettes, do you use the 1/2u top row very often? i love the idea of a Palette or two, but every time i fill one on ModGrid i realize the top row and 1u's do nothing for me.
So, initially I was using my first palette as a standalone drum machine, which utilized the audio jacks and midi input. But now that I set them as control skiffs, the Buffered mults get used for pitch CV often, and on the one, the midi in goes to the 1U midi module. Supposedly the 1uO_C has an adapter that will be available soon to connect it to the pallette midi input, so eventually I'll move that to the other palette case. SO the only thing not currently used are the 1/4 I/O jacks.
gotcha. thanks for the breakdown!

yeah. i was trying a Modular Modular thing for awhile, with room for 2 MN Skiffs in front of a 7u. one skiff for mixing and effects, the other for swapping a couple different options. went to a 12u and put all the Main Shizz, mixing, effects in, way happier. but still am thinking about a skiff for Rarely Used But Loved Loots. or a Palette or two.

DILEMMAS.
music, noise, in progress silliness - http://www.youtube.com/c/behndy

User avatar
Fablon
Learning to Wiggle
Posts: 2
Joined: Sat Jan 11, 2020 6:00 am
Location: Kent, UK

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by Fablon » Sat Jan 11, 2020 12:14 pm

Loving these pics... :party: Some amazing systems...!! My starter rig...
DSC_1996-2.jpg
DSC_1996-2.jpg (740.89 KiB) Viewed 1019 times
Onward, further!

User avatar
Happiness Forever
Wiggling with Experience
Posts: 432
Joined: Fri Jan 23, 2015 12:20 am
Location: Burien School of Elektronikosmiche

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by Happiness Forever » Sat Jan 11, 2020 9:03 pm

Havent posted in a while in here. Finally at a pretty happy point, finding enough time, been exploring deeper into the electronic cosmic.... :tu:
20200111_174637.jpg
20200111_174637.jpg (3.39 MiB) Viewed 936 times
20200111_175428.jpg
20200111_175428.jpg (2.39 MiB) Viewed 936 times
_________________

!MONDO ANTHEM!
Live Large, Live Often.

________________

galaxie
Common Wiggler
Posts: 110
Joined: Sat Jul 28, 2018 12:36 pm

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by galaxie » Tue Jan 14, 2020 3:09 pm

Audiodaan wrote:
Sat Jan 04, 2020 6:12 am
Here is my current system, though it changes all the time.


20200104_120459.jpg
Good desk to avoid sore back. It seems solid and firm to hold the weight.

Audiodaan
Learning to Wiggle
Posts: 42
Joined: Fri Jan 19, 2018 8:18 pm

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by Audiodaan » Tue Jan 14, 2020 3:28 pm

galaxie wrote:
Tue Jan 14, 2020 3:09 pm
Audiodaan wrote:
Sat Jan 04, 2020 6:12 am
Here is my current system, though it changes all the time.


20200104_120459.jpg
Good desk to avoid sore back. It seems solid and firm to hold the weight.
It is, and it's very easy to adjust the height with the manual crank, so I do that all the time - sometimes sit, sometimes stand, it's perfect for me.

User avatar
Silentnotes
Common Wiggler
Posts: 192
Joined: Tue Dec 06, 2016 6:07 pm

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by Silentnotes » Tue Jan 14, 2020 3:58 pm

Dark matter in service..
Attachments
20200114_215159.jpg
20200114_215159.jpg (2.98 MiB) Viewed 708 times

User avatar
anosou
Wiggling with Experience
Posts: 300
Joined: Sat Jun 04, 2016 5:24 pm
Location: Stockholm

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by anosou » Tue Jan 14, 2020 4:48 pm

Image

Here's my main set-up. Recently removed most things drum related to get more HP for droning. Pretty happy there's now a lot of interesting third party Intellijel 1U tiles. The Sloths are great. Next up is probably moving some digital oscillators to my KB37 to make room for Joranalogue Filter 8, Bastl Waver or perhaps an Instruo Ts-L for more analog goodness.
You can hear & see my modular noodling on YouTube.
You can find my rack at ModularGrid.
WTB: Original Mutable Instruments Tides faceplate. Will pay handsomely. Send me a PM!

User avatar
100000bps
Common Wiggler
Posts: 110
Joined: Wed Jan 08, 2020 7:56 am

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by 100000bps » Wed Jan 15, 2020 6:56 am

Ahhh, the feeling of completion : )).
Image

Some sounds the beast make when plugg'd: one two three

User avatar
mulder
Learning to Wiggle
Posts: 42
Joined: Sun Jan 12, 2020 9:31 am
Location: Philly

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by mulder » Wed Jan 15, 2020 10:50 am

100000bps wrote:
Wed Jan 15, 2020 6:56 am
Ahhh, the feeling of completion : )).
Image

Some sounds the beast make when plugg'd: one two three
Where did you pick up the DivKid Ochd?

User avatar
100000bps
Common Wiggler
Posts: 110
Joined: Wed Jan 08, 2020 7:56 am

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by 100000bps » Wed Jan 15, 2020 10:51 am

Matttech Modular https://matttechmodular.co.uk/ but its out of stock now (checked for you :))

User avatar
belsina
Common Wiggler
Posts: 59
Joined: Sun Apr 07, 2019 2:06 am

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by belsina » Wed Jan 15, 2020 10:54 am

100000bps wrote:
Wed Jan 15, 2020 6:56 am
Ahhh, the feeling of completion : )).
Image

Some sounds the beast make when plugg'd: one two three
Wow,... Verbos Bark Filter and 2x Serge Resonant Equalizer. Very nice.

User avatar
Tumulishroomaroom
Super Deluxe Wiggler
Posts: 1624
Joined: Thu Oct 27, 2016 7:17 am
Location: Paris
Contact:

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by Tumulishroomaroom » Wed Jan 15, 2020 11:26 am

belsina wrote:
Wed Jan 15, 2020 10:54 am
100000bps wrote:
Wed Jan 15, 2020 6:56 am
Ahhh, the feeling of completion : )).
Image

Some sounds the beast make when plugg'd: one two three
Wow,... Verbos Bark Filter and 2x Serge Resonant Equalizer. Very nice.
Yep very nice and original ! Love both the Bark filter and ResEQ (which I discovered the other day works wonderfully as a percussive voice too).
instagram
dc11- electron 4 tracks ep of modular deep techno

User avatar
100000bps
Common Wiggler
Posts: 110
Joined: Wed Jan 08, 2020 7:56 am

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by 100000bps » Wed Jan 15, 2020 11:47 am

Thanks guys :) love the sound of both Bark and ResEQs. Much 'electric' & 'alive' in a sense ~~

User avatar
cptnal
Super Deluxe Wiggler
Posts: 4038
Joined: Wed Jun 14, 2017 2:48 am
Location: People's Republic of Scotland

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by cptnal » Wed Jan 15, 2020 3:39 pm

100000bps wrote:
Wed Jan 15, 2020 11:47 am
Thanks guys :) love the sound of both Bark and ResEQs. Much 'electric' & 'alive' in a sense ~~
Nice work! We see many racks in these pages, but this one has the look of a real Instrument. :love:
Is it finished?
Latest Tune:
Sounds: SoundCloud , Freesound
Racks: Big Case, Top Row, Funboat, Tinicase

User avatar
Tumulishroomaroom
Super Deluxe Wiggler
Posts: 1624
Joined: Thu Oct 27, 2016 7:17 am
Location: Paris
Contact:

Re: Post pics of your euro setup! - RESIZE YOUR PHOTOS PLEASE

Post by Tumulishroomaroom » Thu Jan 16, 2020 12:57 pm

Init preset :

R0090181-2 copie.jpg
R0090181-2 copie.jpg (2.56 MiB) Viewed 1475 times
R0090183-2.jpg
R0090183-2.jpg (1.31 MiB) Viewed 1475 times
R0090182-2.jpg
R0090182-2.jpg (1.15 MiB) Viewed 1475 times
instagram
dc11- electron 4 tracks ep of modular deep techno

Post Reply

Return to “Eurorack Modules”