Retail orgone accumulator.

Neutron7 · Post by **Neutron7** » Sat Dec 12, 2015 10:19 pm

it is done

will be released around Jan 15.

final version im finalizing firmware on.

enj_music · Post by **enj_music** » Sat Dec 12, 2015 10:20 pm

It looks so stylish!
Can you talk a little about the additional features in this version?

Neutron7 · Post by **Neutron7** » Sat Dec 12, 2015 10:34 pm

It is not actually white as it appears in the photo, it is weird lighting. it is silver aluminum metalphoto, as per usual

the sound is the same as the DIY version. it actually runs the same code, and detects the hardware to know what to do with interface changes.

differences:

more blinky lights,
momentary switches instead of latching
select effect by pressing sel, then the one you want rather than cycling through
CV control of the 3 main wave selectors and the mod wave selector.
4 layer modern PCB with SMD parts, slightly less noise.
reverse power protection on connector
more efficient regulator
you need a separate programmer (not very expensive, its just a USB jack and IC with abootloader that connects to a heade ron the back) to modify firmware, so DIY firmware tinkerers need to keep that in mind.
can be powered through programmer and synth power at the same time
words changed again (sorry!)

sound wize they are the same. the only thing "extra" are 2 different features in the drum effect because you no longer need "cv swapping" now those 2 buttons create a more gradual drum tail on their respective drum envelopes.

here is the manual:

http://www.neutron-sound.com/PDFs/OrgoneRetailGuide.pdf

Dogma · Post by **Dogma** » Sat Dec 12, 2015 11:42 pm

I've been away but a massive congrats on the official release!!!!!!

z3r01 · Post by **z3r01** » Sun Dec 13, 2015 1:53 am

Definitely gonna switch out my DIY version for this. CV control of the 3 waves+mod selector is crazy awesome.

If I may ask, what is the retail price gonna be for the Orgone, and are they going to be available either through direct purchase, or distributors?

Thanks!

phutureboy · Post by **phutureboy** » Sun Dec 13, 2015 6:45 am

That's great news, congrats !

Neutron7 wrote:more blinky lights

I hope you make sure they are not too bright

Electrostatic · Post by **Electrostatic** » Sun Dec 13, 2015 6:52 am

I have to say, I've been following the development of the Orgone Accumulator with great interest through each and every firmware update there's been.
It's moved from being what was a great oscillator to what I now consider to be the very best oscillator, noise machine, drum module all rolled into one.
I really can't wait for the retail version, but will also be keeping my original DIY version for twin Orgone action.

Neutron and WMD working together.... Perfect.

wirelesswine · Post by **wirelesswine** » Sun Dec 13, 2015 7:40 am

Jumping in on the thread. Also curious of price!

Daisuk · Post by **Daisuk** » Sun Dec 13, 2015 8:15 am

Cool. Been wanting to build one, but lack the skills. Are there any demos of the drum mode in it?

Neutron7 · Post by **Neutron7** » Sun Dec 13, 2015 10:21 am

there are drum sounds on a few of the demos in this playlist. the "orgone trax" ones use exclusively orgone sounds including drums.

https://soundcloud.com/neutron7/sets/ne ... ccumulator

Kroaton · Post by **Kroaton** » Sun Dec 13, 2015 1:06 pm

Will you still be selling DIY kits through Thonk?

MatrixModulator · Post by **MatrixModulator** » Sun Dec 13, 2015 1:22 pm

Kroaton wrote:Will you still be selling DIY kits through Thonk?

I will be interested in a kit or partial kit if it happens.

falafelbiels · Post by **falafelbiels** » Sun Dec 13, 2015 1:24 pm

Hard to believe it could look even better...

Neutron7 · Post by **Neutron7** » Sun Dec 13, 2015 1:31 pm

Kroaton wrote:Will you still be selling DIY kits through Thonk?

thonk and synthcube will still have diy. as long as they want them, ill keep reordering.

Kroaton · Post by **Kroaton** » Sun Dec 13, 2015 1:33 pm

Cheers for the quick reply and congrats on getting this thing up to 1.0 (or would this be 2.0

)

MatrixModulator · Post by **MatrixModulator** » Sun Dec 13, 2015 1:33 pm

Neutron7 wrote:
Kroaton wrote:Will you still be selling DIY kits through Thonk?
thonk and synthcube will still have diy. as long as they want them, ill keep reordering.

You mean the first version or this new version too?

Neutron7 · Post by **Neutron7** » Sun Dec 13, 2015 1:40 pm

MatrixModulator wrote:
Neutron7 wrote:
Kroaton wrote:Will you still be selling DIY kits through Thonk?
thonk and synthcube will still have diy. as long as they want them, ill keep reordering.
You mean the first version or this new version too?

I am not sure about the new version in a kit because the through hole op amps for the cv inputs might take up too much space. if i do it it will not be for a while because i am working on the hardware for another module.

MatrixModulator · Post by **MatrixModulator** » Sun Dec 13, 2015 1:45 pm

Oh ok thanks

Maybe a through hole version with a few smd parts ? Just a suggestion...
Nice module!

Summa · Post by **Summa** » Sun Dec 13, 2015 2:10 pm

Yay! I've been looking real hard at getting one of these but the DIY backlog is too long and time consuming I'd gladly pay to get a manufactured unit. Who's reselling in the EU? EFN I hope!

Neutron7 · Post by **Neutron7** » Sun Dec 13, 2015 2:14 pm

Summa wrote:Yay! I've been looking real hard at getting one of these but the DIY backlog is too long and time consuming I'd gladly pay to get a manufactured unit. Who's reselling in the EU? EFN I hope!

as far as i know, anyone who sells WMD can stock them.

Summa · Post by **Summa** » Sun Dec 13, 2015 2:15 pm

Neutron7 wrote:
Summa wrote:Yay! I've been looking real hard at getting one of these but the DIY backlog is too long and time consuming I'd gladly pay to get a manufactured unit. Who's reselling in the EU? EFN I hope!
as far as i know, anyone who sells WMD can stock them.

Great! I'll tell Ulf to get them then!

TripJ · Post by **TripJ** » Sun Dec 13, 2015 2:44 pm

Beautiful Panel!

HIMA · Post by **HIMA** » Mon Dec 14, 2015 2:59 am

had a chance to hear a DIY version of this module. It's glorious. Everything I wish my Shapeshifter had been. I'm looking at my VCO-2RM and wondering if i still need it...

bcitral · Post by **bcitral** » Mon Dec 14, 2015 7:42 am

Congratulations on this release. Its all very exciting.

bobbcorr · Post by **bobbcorr** » Mon Dec 14, 2015 9:44 am

Congratulations! This makes one of the most exciting, exotic modules in Eurorack accessible to dullards like myself who cannot be trusted with a soldering iron.

MUFF WIGGLER

MUFF WIGGLER

Retail orgone accumulator.

Retail orgone accumulator.