Ornament + Crime

[pld]

I think the same problem was discussed on the hemispheres thread including a solution:
viewtopic.php?f=16&t=203576&hilit=hemisphere&start=1225

It's a common enough issue...
IIRC one of the other apps uses the "if reset high" approach (or maybe it was TU?), but it seems intentional here to use the rising edge to enable the reset clock divider.

[versionz]

all other triggers are sent except those on step 1

I’ll make a video so you can see the reset starting at step 2 or skipping step 1

That's what the code seems to indicate will happen. On reset, it sets itself to step 1. So the next clock puts it on step two.
I guess it works IFF reset and trigger are super-synchronous (like within 60us) otherwise they are treated as two separate events and step 1 probably gets lost. Not sure if bug or quirk

It renders the reset function completely unusable for me unfortunately. I need Polymetric rhythms to shift phase and play the first trigger on the 1 - especially if it’s a kick. I guess it won’t matter of the trigger is offset and 1 is empty. But I need that kick on the 1

[DeltaTucanae]

Does anyone have any experience with a consistent clicking sound coming from their outputs? It's happening at all times regardless of cv input, and does effect the cv outputs. Tried different firmwares/cases/cables already. Found the problem while troubleshooting other noise issues in my case, also noticed I can faintly hear the clicking in other modules when the o_C is in the case.

[behndy]

did the bigger screen version someone was attempting end up working?

i would loooooove a bigger screen.

boop?

[deftinwulf]

did the bigger screen version someone was attempting end up working?

i would loooooove a bigger screen.

boop?

This is where I keep getting stuck on the O_C. I get that a bigger screen would absolutely not work on the 8hp micro ones most people are building these days. But the bigger (14hp?) original one seemingly has the panel real estate for something larger, and it would make the module so much nicer to use. I wonder if it will ever happen.

[pld]

The driver doesn't work with larger displays out of the box (apparently they don't like overclocking) which seems to have been a major deterrent. It can be/has been made to work with a 2.4" that I know of -- AFAIK no one's making one for euro though, just for 5U.

[behndy]

Peh Leh Deh - gotcha. lol. i.... i can't got to 5u. i am terrified of that step. thanks!

Definitely Tin Wolf - right? i would totalllllly be fine with going to 14 or 16 or mebbe even 20 hp to have a larger screen. if someone gets there, GRABBING.

thanks ya'all!

[DoverBeach]

Hello everyone, noob question:
As far as I understand after reading the manual, quantermain is essentially a quad sample and hold with a quantiser. (and a lot of extra features of course). Does o+c behave like a track and hold when receives a gate instead of a trig?

thanks

[pld]

Hello everyone, noob question:
As far as I understand after reading the manual, quantermain is essentially a quad sample and hold with a quantiser. (and a lot of extra features of course). Does o+c behave like a track and hold when receives a gate instead of a trig?

thanks

So I'm not sure what you're expecting to happen with a gate, but Quantermain only reacts to rising edges on the trigger inputs (unless in continuous mode).