AUTODYNE - Auto-Compressor and Distortion by SSF

Cwejman, Livewire, TipTop Audio, Doepfer etc... Get your euro on!

Moderators: Kent, luketeaford, Joe.

User avatar
analogPedagog
Steady State Fate
Posts: 985
Joined: Wed Apr 14, 2010 10:56 pm
Location: New York
Contact:

AUTODYNE - Auto-Compressor and Distortion by SSF

Post by analogPedagog » Tue May 28, 2019 6:28 am

Autodyne is a 4hp auto-compressor/distortion featuring a multi-mode side chain filter and NY style parallel compression blend control.

Ratio, Threshold and Gain are all built into a single, simple to use COMP control. Compression gets more extreme as this control is swept past center position. Setting below center offers more subtle/typical compression.

Autodyne Automatically Responds to Transients, will glue a mix with ease and dial in the perfect feeling of the program material you feed into it.

GAIN CONTROL to trim the final output gain or offer up some extremely brutal distortion, whichever you prefer.

Switchable Side Chain Filter is provided along with a triple slope high pass filter, in order to retain lower frequency content and unwanted over-compression by removing them from the Side Chain. Input signal is normalized into the Side Chain or an external signal may be utilized via the Side Chain Input.

Parallel Compression BLEND Control mixes the unaffected input signal with the compressed output for even further control of your sound. Compression may be bypassed simply by sweeping this control to minimum position.

Controls are simple enough to match in tandem for dual unit, stereo operation, if desired.

Audiophile grade discrete components and Burr-Brown op amps used throughout.

Autodyne starts shipping to dealers the first week of June 2019

Image

User avatar
kay_k
Ultra Wiggler
Posts: 856
Joined: Thu Mar 30, 2017 7:33 am
Location: Berlin
Contact:

Post by kay_k » Tue May 28, 2019 6:56 am

hmmmm .. looks yummy

any chance there is a way of adding a slave VCA channel to sidechain multiple channels with one detector ?

User avatar
plainjanefrancis
Common Wiggler
Posts: 200
Joined: Thu Apr 27, 2017 12:46 pm

Post by plainjanefrancis » Tue May 28, 2019 11:38 am

:yay: perfect timing

User avatar
matttech
Super Deluxe Wiggler
Posts: 9745
Joined: Wed Feb 23, 2011 1:12 pm
Location: Manchester, UK

Post by matttech » Tue May 28, 2019 4:55 pm

8-) 8-) 8-)

User avatar
turin horsey
Wiggling with Experience
Posts: 406
Joined: Mon Jul 07, 2014 7:08 pm

Post by turin horsey » Tue May 28, 2019 5:04 pm

Hooray! Can't wait to hear it DUCK!!!

User avatar
lohacker
Ultra Wiggler
Posts: 790
Joined: Sat Oct 01, 2011 6:48 am

Post by lohacker » Tue May 28, 2019 5:25 pm

WANT :hyper: :hyper: :hyper:
The panel will be only in black?

NoLegs
Ultra Wiggler
Posts: 905
Joined: Mon Oct 17, 2016 6:16 pm
Contact:

Post by NoLegs » Tue May 28, 2019 6:40 pm

I was lucky enough to get a prototype a while back and I've been looking forward to picking up a second one for stereo.

Here's a quick first patch with it from a little while back:

[video][/video]

It's pretty much cranked to max on this, in the beginning I turn the blend up from 0 to 100.

User avatar
Paranormal Patroler
Super Deluxe Wiggler
Posts: 11201
Joined: Tue Aug 30, 2011 3:40 pm
Location: the Terminal beach

Post by Paranormal Patroler » Wed May 29, 2019 3:37 am

I only wish I could control the Attack/Release part of the compression. I really like the rest. Super nice to have more compression options in eurorack.
All rights reserved; all wrongs reversed.

User avatar
Tumulishroomaroom
Super Deluxe Wiggler
Posts: 1684
Joined: Thu Oct 27, 2016 7:17 am
Location: Paris
Contact:

Post by Tumulishroomaroom » Wed May 29, 2019 5:02 am

Looking good !
instagram
dc11- immersion 4 tracks ep of modular deep techno

User avatar
analogPedagog
Steady State Fate
Posts: 985
Joined: Wed Apr 14, 2010 10:56 pm
Location: New York
Contact:

Post by analogPedagog » Thu May 30, 2019 3:36 pm

kay_k wrote:hmmmm .. looks yummy

any chance there is a way of adding a slave VCA channel to sidechain multiple channels with one detector ?
Could this not be accomplished using a multiple?
lohacker wrote:WANT :hyper: :hyper: :hyper:
The panel will be only in black?
Yes.
Paranormal Patroler wrote:I only wish I could control the Attack/Release part of the compression. I really like the rest. Super nice to have more compression options in eurorack.
Then I could have just called it DYNE. :razz:
But seriously, the automatic nature of it is very simple and reacts very well to transients. The Compression control plays into the attack/release response as well.
Tumulishroomaroom wrote:Looking good !
Thanks!

User avatar
leeski
Super Deluxe Wiggler
Posts: 2117
Joined: Sat May 12, 2012 5:44 pm
Location: Saturn

Post by leeski » Thu May 30, 2019 4:07 pm

:wow: looks great
«:::A:::» «:::W:::» «:::E:::» «:::S:::» «:::O:::» «:::M:::» «:::E:::»

Johnbomb
Common Wiggler
Posts: 148
Joined: Wed Apr 26, 2017 11:57 am
Location: Nashville

Post by Johnbomb » Thu May 30, 2019 4:40 pm

That's cool! Is it FET or VCA based?

User avatar
analogPedagog
Steady State Fate
Posts: 985
Joined: Wed Apr 14, 2010 10:56 pm
Location: New York
Contact:

Post by analogPedagog » Thu May 30, 2019 4:54 pm

Johnbomb wrote:That's cool! Is it FET or VCA based?
VCA based, feed forward topology. Soft knee response.

User avatar
Sandrine
Super Deluxe Wiggler
Posts: 2331
Joined: Tue Jun 09, 2015 10:28 pm
Location: BC Canada
Contact:

Post by Sandrine » Thu May 30, 2019 5:03 pm

Paranormal Patroler wrote:I only wish I could control the Attack/Release part of the compression. I really like the rest. Super nice to have more compression options in eurorack.
ditto, but sure sounds gerd!!

Johnbomb
Common Wiggler
Posts: 148
Joined: Wed Apr 26, 2017 11:57 am
Location: Nashville

Post by Johnbomb » Thu May 30, 2019 5:53 pm

analogPedagog wrote:VCA based, feed forward topology. Soft knee response.
Cool- so a dbx 160 vibe?

User avatar
MARK27
Wiggling with Experience
Posts: 497
Joined: Sat Mar 25, 2017 7:07 pm
Location: Oklahoma City

Post by MARK27 » Thu May 30, 2019 6:57 pm

a black panel SSF module? Finally, I can add some SSF juice to my system! I've been waiting so long...

:yay:

User avatar
Tonescape
Wiggling with Experience
Posts: 351
Joined: Tue Jan 27, 2015 10:18 am
Location: Denmark
Contact:

Post by Tonescape » Fri May 31, 2019 1:48 am

Very intrigued by this :love:
Image
_________________________________________________
www.bragi-modular.com - www.instagram.com/momecmusic

User avatar
matttech
Super Deluxe Wiggler
Posts: 9745
Joined: Wed Feb 23, 2011 1:12 pm
Location: Manchester, UK

Post by matttech » Fri May 31, 2019 2:15 am

Preorders now open for this little fella :bananaguitar:

User avatar
chuckleone
Common Wiggler
Posts: 137
Joined: Tue Jul 24, 2018 3:23 pm

Post by chuckleone » Fri May 31, 2019 2:04 pm

NoLegs wrote:I was lucky enough to get a prototype a while back and I've been looking forward to picking up a second one for stereo.

Here's a quick first patch with it from a little while back:

[video][/video]

It's pretty much cranked to max on this, in the beginning I turn the blend up from 0 to 100.
That sounds amazing. I know you posted this a way ago, but do you remember where in the signal chain the Autodyne was?

NoLegs
Ultra Wiggler
Posts: 905
Joined: Mon Oct 17, 2016 6:16 pm
Contact:

Post by NoLegs » Fri May 31, 2019 2:39 pm

chuckleone wrote:
NoLegs wrote:I was lucky enough to get a prototype a while back and I've been looking forward to picking up a second one for stereo.

Here's a quick first patch with it from a little while back:

[video][/video]

It's pretty much cranked to max on this, in the beginning I turn the blend up from 0 to 100.
That sounds amazing. I know you posted this a way ago, but do you remember where in the signal chain the Autodyne was?
I'm a little bit hazy on the details, but I seem to remember submixing the percussion parts and then putting that through the Autodyne. I think I used an Audio Damage Boomtschak along with the Entity Percussion Synthesizer.

User avatar
chuckleone
Common Wiggler
Posts: 137
Joined: Tue Jul 24, 2018 3:23 pm

Post by chuckleone » Fri May 31, 2019 2:59 pm

NoLegs wrote:
chuckleone wrote:
NoLegs wrote:I was lucky enough to get a prototype a while back and I've been looking forward to picking up a second one for stereo.

Here's a quick first patch with it from a little while back:

[video][/video]

It's pretty much cranked to max on this, in the beginning I turn the blend up from 0 to 100.
That sounds amazing. I know you posted this a way ago, but do you remember where in the signal chain the Autodyne was?
I'm a little bit hazy on the details, but I seem to remember submixing the percussion parts and then putting that through the Autodyne. I think I used an Audio Damage Boomtschak along with the Entity Percussion Synthesizer.
That makes sense. Thank you.

User avatar
analogPedagog
Steady State Fate
Posts: 985
Joined: Wed Apr 14, 2010 10:56 pm
Location: New York
Contact:

Post by analogPedagog » Sun Jun 02, 2019 1:17 pm

Johnbomb wrote:
analogPedagog wrote:VCA based, feed forward topology. Soft knee response.
Cool- so a dbx 160 vibe?
Autodyne has more of its own vibe but reminiscent on some levels.

User avatar
kay_k
Ultra Wiggler
Posts: 856
Joined: Thu Mar 30, 2017 7:33 am
Location: Berlin
Contact:

Post by kay_k » Mon Jun 03, 2019 4:18 am

analogPedagog wrote:
kay_k wrote:hmmmm .. looks yummy

any chance there is a way of adding a slave VCA channel to sidechain multiple channels with one detector ?
Could this not be accomplished using a multiple?
sure, I just meant like a cheaper and slimmer way to get to stereo processing.

User avatar
ben_hex
Super Deluxe Wiggler
Posts: 6724
Joined: Sun May 12, 2013 12:58 pm
Location: West Yorkshire, England

Post by ben_hex » Sat Jul 06, 2019 9:02 am

Had a lot of fun with Autodyne and it's been in a lot of patches post video too! For anyone that missed it here's my Autodyne demo with some additional mix tips

[video][/video]
All DivKid video series to be found here!
http://www.youtube.com/divkidvideo

versipellis
Wiggling with Experience
Posts: 453
Joined: Tue Oct 02, 2018 9:25 pm
Location: Boston

Post by versipellis » Sat Jul 06, 2019 1:46 pm

I'd love to have this in stereo as a master out comp!
tunes: https://www.soundcloud.com/dycedot
in boston? I run nights: https://www.facebook.com/4OTFEvents/
selling [Korg Prologue 16, Erica Synths Fusion Mixer v3, Frequency Central Raging Bull 3.0]: viewtopic.php?f=74&t=239013

Post Reply

Return to “Eurorack Modules”