Doepfer A-126 with A-110-4

Cwejman, Livewire, TipTop Audio, Doepfer etc... Get your euro on!

Moderators: Joe., lisa, luketeaford, Kent

Post Reply
User avatar
macs4music
Wiggling with Experience
Posts: 279
Joined: Fri Aug 22, 2014 7:35 am
Location: London

Doepfer A-126 with A-110-4

Post by macs4music » Mon May 11, 2020 7:56 am

Hi there,

I currently have my A-126 connected to the QLFO (A-143-9) so enable low frequency shifts. However I was wondering if it was possible to instead connect to the A-110-4 Thru Zero VCO/LFO? I can see 2 possible places to connect a solder joint; one before the 1k resistors (marked signal on the amplifier kit manual) and post resistor marked 'socket'. Which would be best; they will both still be connected with the inline capacitor as required.

Many thanks,

Neil
Started with an Atari 1040STe, at least the timing was good....

Post Reply

Return to “Eurorack Modules”