Braids / uBraids2 random program / wave change?

Cwejman, Livewire, TipTop Audio, Doepfer etc... Get your euro on!

Moderators: Kent, luketeaford, Joe.

Post Reply
User avatar
seditionary
Wiggling with Experience
Posts: 259
Joined: Sat Dec 21, 2013 5:55 pm
Location: Los Angeles

Braids / uBraids2 random program / wave change?

Post by seditionary » Tue Feb 23, 2021 3:57 pm

Hi!

Do any of you know how to create random program wave shape selection as seen in this video? Is it a special firmware (and if so, which?)



Thank you!

User avatar
nostalghia
Super Deluxe Wiggler
Posts: 1071
Joined: Sun Apr 07, 2013 2:46 pm
Location: central usofa

Re: Braids / uBraids2 random program / wave change?

Post by nostalghia » Tue Feb 23, 2021 4:21 pm

Standard factory software has this feature. In the Settings, select “ON” for the 1st option, called “META”. This will let the cv source of your choice (LFO, random voltage source, envelope generator, etc) change the models/waves when patched to Braid’s FM input. Set the FM knob to something other than 12:00.
Covered under “Options” in the manual: https://mutable-instruments.net/modules/braids/manual/
“If you look for a meaning, you'll miss everything that happens.” - Andrei Tarkovsky
https://soundcloud.com/nostalghia70s

User avatar
seditionary
Wiggling with Experience
Posts: 259
Joined: Sat Dec 21, 2013 5:55 pm
Location: Los Angeles

Re: Braids / uBraids2 random program / wave change?

Post by seditionary » Wed Feb 24, 2021 7:54 am

nostalghia wrote:
Tue Feb 23, 2021 4:21 pm
Standard factory software has this feature. In the Settings, select “ON” for the 1st option, called “META”. This will let the cv source of your choice (LFO, random voltage source, envelope generator, etc) change the models/waves when patched to Braid’s FM input. Set the FM knob to something other than 12:00.
Covered under “Options” in the manual: https://mutable-instruments.net/modules/braids/manual/
:boat: Thank you so very much :) :eurorack: :loves:

Post Reply

Return to “Eurorack Modules”