CS-80 filter v2.3 for Euro & 5U

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: Joe., luketeaford, lisa, Kent

Post Reply
kashmir
Common Wiggler
Posts: 65
Joined: Fri Apr 01, 2016 6:07 am

Post by kashmir » Sat Oct 01, 2016 8:24 am

1x panel + PCB set please! Any color of panel is fine.

cupwise
Wiggling with Experience
Posts: 254
Joined: Fri Dec 02, 2011 2:51 am

Post by cupwise » Sun Oct 02, 2016 6:25 am

1 black panel + pcb

User avatar
leeski
Super Deluxe Wiggler
Posts: 2112
Joined: Sat May 12, 2012 5:44 pm
Location: Saturn

Post by leeski » Sun Oct 02, 2016 6:38 am

1x silver panel + pcb would be great for me.
Many thanks for getting this sorted :tu:
«:::A:::» «:::W:::» «:::E:::» «:::S:::» «:::O:::» «:::M:::» «:::E:::»

Captain Sternn
Common Wiggler
Posts: 163
Joined: Sun Jun 09, 2013 7:39 pm

Post by Captain Sternn » Mon Oct 03, 2016 7:01 pm

Panel order has passed?

Can I please buy just a PCB set?

Thanks! :sb:

DvStcH
Learning to Wiggle
Posts: 7
Joined: Tue Jul 12, 2016 12:20 pm
Location: UK

Post by DvStcH » Tue Oct 04, 2016 3:51 am

Sign me up for the next batch please!!

User avatar
muffdiver
Common Wiggler
Posts: 208
Joined: Fri Feb 21, 2014 7:50 pm

Post by muffdiver » Thu Oct 06, 2016 11:38 pm

Getting psyched for this - any update on 2nd run and panels?

User avatar
oldcrow
Super Deluxe Wiggler
Posts: 1067
Joined: Sun Nov 20, 2011 4:05 pm
Location: Chicago, IL USA
Contact:

Post by oldcrow » Fri Oct 07, 2016 2:04 pm

I set up a panels order entry:

http://cs80-com.myshopify.com/products/ ... r-eurorack

Both black and silver options are there, 15 of each are available.

This is to gather the payments so I can make the panel order, which is otherwise ready to go. Two caveats: 1) if you already paid for a panel, ignore this and 2) if you want a panel shipped with an *already ordered* board set then please email me at oldcrow@oldcrows.net. This is only for the initial board sets, not the 2nd run or other future runs.

Otherwise, if you expressed interest in a panel here, go for it. :sb:

--Crow
/**/

User avatar
muffdiver
Common Wiggler
Posts: 208
Joined: Fri Feb 21, 2014 7:50 pm

Post by muffdiver » Fri Oct 07, 2016 3:19 pm

Ordered!

Tacked the GX1 on the order though I didn't see it listed. Hoping it's still available. :hyper:

User avatar
williamcarthief
Common Wiggler
Posts: 233
Joined: Mon Nov 03, 2014 12:08 am
Location: Spokane, WA

Post by williamcarthief » Fri Oct 07, 2016 3:50 pm

still so excited for this

User avatar
williamcarthief
Common Wiggler
Posts: 233
Joined: Mon Nov 03, 2014 12:08 am
Location: Spokane, WA

Post by williamcarthief » Sat Oct 15, 2016 6:50 pm

Any updates? Have pcbs/panels shipped yet? Is there a BOM available?

I hope I don't seem impatient, I'm just really excited for this filter.

User avatar
oldcrow
Super Deluxe Wiggler
Posts: 1067
Joined: Sun Nov 20, 2011 4:05 pm
Location: Chicago, IL USA
Contact:

Post by oldcrow » Sun Oct 16, 2016 1:13 pm

Heya folks, got delayed due to illness. I will be shipping the batch 1 board sets tomorrow. Panels for those orders (that ordered a panel) I will ship when they arrive. BOM will be done this evening.

The next board batches I have on order. More soon,

--Crow

User avatar
williamcarthief
Common Wiggler
Posts: 233
Joined: Mon Nov 03, 2014 12:08 am
Location: Spokane, WA

Post by williamcarthief » Sun Oct 16, 2016 1:27 pm

Thanks for the update! Hope you're feeling better.

User avatar
oldcrow
Super Deluxe Wiggler
Posts: 1067
Joined: Sun Nov 20, 2011 4:05 pm
Location: Chicago, IL USA
Contact:

Post by oldcrow » Mon Oct 24, 2016 2:06 am

Heya folks, quick update now that I am (mostly) healed. Panels are on order, PCB batch #2 is on order. To get things squared-up as fast as possible I am going to ship the remaining batch 1 boards this week without panels (if you ordered one) so folks can get to assembly. When the panels arrive, I will ship those out, so those who have a board set and a panel will get two parcels a couple weeks apart.

When batch #2 PCBs are in stock, I will add a line item to the order page for boards plus a panel for future orders. Right now there is the (out of stock) board set item, and the two panels-only (no boards included) choices I set up for the first panel run. I have an list of customers with boards+panels I will work from and once I settle those I will announce batch 2. This way everyone gets their stuff and I can get all the ducks in a row. :sb:

The build doc is ready, I will upload Monday afternoon. --Crow

User avatar
oldcrow
Super Deluxe Wiggler
Posts: 1067
Joined: Sun Nov 20, 2011 4:05 pm
Location: Chicago, IL USA
Contact:

Post by oldcrow » Mon Oct 24, 2016 8:54 pm

The M480 mk2 v2.3.2 build doc is here:

http://www.cs80.com/motm480/v232/M480Mk2v232_boards.pdf

I will have some images up to detail headers, etc. later this week.

Crow
/**/

User avatar
ZZ Ardoz
Wiggling with Experience
Posts: 495
Joined: Wed Sep 02, 2015 4:12 pm
Location: Los Angeles

Post by ZZ Ardoz » Mon Oct 24, 2016 9:48 pm

oldcrow wrote:The M480 mk2 v2.3.2 build doc is here:

http://www.cs80.com/motm480/v232/M480Mk2v232_boards.pdf

I will have some images up to detail headers, etc. later this week.

Crow
/**/
:banana: :banana: :banana: :banana: :banana:

Thanks a ton!

User avatar
GryphonP3
Super Deluxe Wiggler
Posts: 1100
Joined: Tue Jan 29, 2013 3:20 pm
Location: Los Angeles

Post by GryphonP3 » Mon Oct 24, 2016 11:10 pm

I was in the batch 1 order and wanted to add a panel. Sent you a PM and an email but never got a response.. Just wanted to make sure I can order a panel with my PCB! :) Lovely work on all these modules.. Keep it up please!
My cat can eat a whole watermelon ...

User avatar
Isaiah
Super Deluxe Wiggler
Posts: 1810
Joined: Wed Jun 02, 2010 6:31 am

Post by Isaiah » Tue Oct 25, 2016 4:05 am

oldcrow
Documentation looks excellent!
It's great to see that there are so many headers to accommodate the preferences of the builder (Euro/4U/5U-friendly). :tu:
Hope this is the approach you take with the CSR-15!
Any news on that? :hyper:

User avatar
ZZ Ardoz
Wiggling with Experience
Posts: 495
Joined: Wed Sep 02, 2015 4:12 pm
Location: Los Angeles

Post by ZZ Ardoz » Tue Nov 01, 2016 11:41 pm

oldcrow wrote:Heya folks, quick update now that I am (mostly) healed. Panels are on order, PCB batch #2 is on order. To get things squared-up as fast as possible I am going to ship the remaining batch 1 boards this week without panels (if you ordered one) so folks can get to assembly. When the panels arrive, I will ship those out, so those who have a board set and a panel will get two parcels a couple weeks apart.

When batch #2 PCBs are in stock, I will add a line item to the order page for boards plus a panel for future orders. Right now there is the (out of stock) board set item, and the two panels-only (no boards included) choices I set up for the first panel run. I have an list of customers with boards+panels I will work from and once I settle those I will announce batch 2. This way everyone gets their stuff and I can get all the ducks in a row. :sb:

The build doc is ready, I will upload Monday afternoon. --Crow
Did the pcbs ship yet?

User avatar
oldcrow
Super Deluxe Wiggler
Posts: 1067
Joined: Sun Nov 20, 2011 4:05 pm
Location: Chicago, IL USA
Contact:

Post by oldcrow » Wed Nov 02, 2016 6:10 pm

ZZ Ardoz wrote:Did the pcbs ship yet?
Yep, should see them by Friday I expect. Will let everyone know the moment panels are in. --Crow

User avatar
ZZ Ardoz
Wiggling with Experience
Posts: 495
Joined: Wed Sep 02, 2015 4:12 pm
Location: Los Angeles

Post by ZZ Ardoz » Wed Nov 02, 2016 6:23 pm

oldcrow wrote:
ZZ Ardoz wrote:Did the pcbs ship yet?
Yep, should see them by Friday I expect. Will let everyone know the moment panels are in. --Crow
Beautiful! Can't wait to hear my afg through one - thanks!

User avatar
williamcarthief
Common Wiggler
Posts: 233
Joined: Mon Nov 03, 2014 12:08 am
Location: Spokane, WA

Post by williamcarthief » Sat Nov 05, 2016 2:36 pm

PCBs in hand! Thanks, oldcrow.

User avatar
williamcarthief
Common Wiggler
Posts: 233
Joined: Mon Nov 03, 2014 12:08 am
Location: Spokane, WA

Post by williamcarthief » Sat Nov 05, 2016 3:53 pm

Looks like there are pads for smt caps on the pcb that aren't listed on the bom. I see c45, c46, c47, and c48 all calling for 100n and c49 and c50 calling for 10u. Do these pads need to have the appropriate value caps on them for euro or are they only needed for MOTM?

I seriously can't find D3 and D4 on the pcb. They are supposed to be 1n5817 per the bom.

Also, in the bom, R65 is supposed to be a 100k. However on the pcb and in the schematic it states it is 68k. I'm guessing it's a 68k, but clarification would be great.

R35 is 150k 1% in the bom, but 100k 1% on the pcb and in the schematic.
Last edited by williamcarthief on Sat Nov 05, 2016 9:33 pm, edited 2 times in total.

User avatar
GryphonP3
Super Deluxe Wiggler
Posts: 1100
Joined: Tue Jan 29, 2013 3:20 pm
Location: Los Angeles

Post by GryphonP3 » Sat Nov 05, 2016 6:52 pm

Got mine today, gonna get it built this week :sb:
My cat can eat a whole watermelon ...

User avatar
williamcarthief
Common Wiggler
Posts: 233
Joined: Mon Nov 03, 2014 12:08 am
Location: Spokane, WA

Post by williamcarthief » Sat Nov 05, 2016 9:51 pm

Per my last post, I'm hesitant to continue assembling this. Not much confidence in the bom. This is the largest bom I've assembled thus far. I'd hate to complete it and have it not work. I'm part way through the resistors and have been stuffing per the values labeled on the pcb, not matching bom to R numbers for most of it. So given the errors I've found I'm not confident that some of the parts I've soldered already are the right ones, though, to repeat myself, I've matched parts to part values listed on the pcb.

Would love some clarification. Perhaps I'll wait until others have attempted assembly.

User avatar
williamcarthief
Common Wiggler
Posts: 233
Joined: Mon Nov 03, 2014 12:08 am
Location: Spokane, WA

Post by williamcarthief » Sun Nov 06, 2016 7:35 pm

I remembered the pictures posted on the first page of this thread and decided to keep going forward. There appears to be a few parts not mentioned in the bom that appear to be necessary - 2x 130k resistors; 2x 10u 0805 caps; 1x 3.3m resistor. Got these on order now as well as the correct switches - I mistakenly did not order board mount versions. I'm hoping the panel shows up about the same time as these parts and I can then have this thing working. Can't wait.

Post Reply

Return to “Music Tech DIY”