TR-606 won't change scale or pattern length

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: Kent, luketeaford, Joe., lisa

Post Reply
User avatar
Learning to Wiggle
Posts: 36
Joined: Thu Feb 07, 2013 9:54 am
Location: Paris

TR-606 won't change scale or pattern length

Post by tupinamba » Sun Aug 02, 2015 4:27 am

Hi everyone!
I posted in this thread ( ... highlight=) but I think it is best I make a new one.

Something is weird with this machine: I cannot change the scale. It is stuck on mode 3 (as the leds show when I push the Function button in Pattern Write mode), but cannot be changed.

Also, I cannot define the number of steps to be played: it is always 16 steps.
I know the Function button sends a signal as it lightens the corresponding scale leds, telling me this is mode 3, but nothing more...

I checked the scale selector connections to the CPU : no faulty solder joints there unfortunately.

Any suggestion welcome... Thanks!

Learning to Wiggle
Posts: 11
Joined: Tue Sep 29, 2020 11:08 am

Re: TR-606 won't change scale or pattern length

Post by vhsx » Wed Jan 13, 2021 11:13 am

you have to click the function button after you change the scale switch in order for the scale to change

Post Reply

Return to “Music Tech DIY”