3 panel black Serge run-Accepting Paypal

tojpeters · Post by **tojpeters** » Mon Sep 28, 2015 10:03 am

The quote came back,a little more expensive than anticipated but I'm ordering a few extra to bring the cost down. I will start taking money now, Paypal for merchandise to tojpeters@yahoo.com. Please include your Muffwiggler name and what you are ordering in the Paypal message-and make sure your shipping address is correct.
Once I get 10 paid for each I'll order, there should be some extras for stragglers.
Thanks everybody. I hope these all get built and are used and loved by you.
Full support will be offered from my end with the wiring and any PCB stacking/oddities.
I already have shipping materials so these will go out quickly.
Thanks again,and hopefully I can do a second 3 panel run once the dust settles on this.
Jon Peters

modintx · Post by **modintx** » Mon Sep 28, 2015 12:57 pm

Hi Jon, sorry late to this party. So I am clear you are taking orders / payment for all 3 panels correct? @ $100 per panel.

tojpeters · Post by **tojpeters** » Mon Sep 28, 2015 1:04 pm

Hi Stu. Yes,I'm taking payments now.

modintx · Post by **modintx** » Mon Sep 28, 2015 1:15 pm

Cheers Jon, they look amazing. I see the mounting holes for CGS91 / PCB rail posts - any thoughts on overall panel to boat hole positions?

Will you use the STS dimensions for example so STS / Random*Source pre-made boats can be used?

Hats off to you on the design.

Off to check my backlog....

PraxisCat · Post by **PraxisCat** » Mon Sep 28, 2015 1:48 pm

modintx wrote:Cheers Jon, they look amazing. I see the mounting holes for CGS91 / PCB rail posts - any thoughts on overall panel to boat hole positions?

Will you use the STS dimensions for example so STS / Random*Source pre-made boats can be used?

Hats off to you on the design.

Off to check my backlog....

Elby designs is another alternative to boats (that just happens to be cheaper).

Also where do we pay TOJPeters. No paypal listed on the thread.

modintx · Post by **modintx** » Mon Sep 28, 2015 2:11 pm

Here you go PraxisCat

tojpeters wrote:

I will start taking money now, Paypal for merchandise to tojpeters@yahoo.com. Please include your Muffwiggler name and what you are ordering in the Paypal message-and make sure your shipping address is correct.

tojpeters · Post by **tojpeters** » Mon Sep 28, 2015 2:26 pm

I place panel to boat mounting holes so they don't cover lettering. I am willing to make any boat mods needed and add studs for a small fee,but there will be additional shipping charges. I will share my method for any interested parties.

PraxisCat · Post by **PraxisCat** » Mon Sep 28, 2015 2:27 pm

Woot! Payment Sent. Will probably ask you to build these for me within the next couple of years.

En_Annan · Post by **En_Annan** » Mon Sep 28, 2015 4:32 pm

Ok, so 100 usd each?
I'll pay on Thursday or during the weekend - once I've moved to my new address.

tojpeters · Post by **tojpeters** » Mon Sep 28, 2015 4:45 pm

$100 USD each-(shipped).
There is a PCB for the solo function available through me.
You will need 1 for each SWAMP.
$30. I know that is high but I'm having them made in the U.S. instead of China.

yan6 · Post by **yan6** » Mon Sep 28, 2015 8:54 pm

payment made

PraxisCat · Post by **PraxisCat** » Tue Sep 29, 2015 1:46 am

To note, I sent the payment for the SWAMP solo mod PCB separately. I kind of jumped the gun on the payment for the panels.

tojpeters · Post by **tojpeters** » Tue Sep 29, 2015 11:48 am

Updated OP with list of takers and payment received.
Just a word on timeline- Once I place the order I will need to give final approval of artwork, then it will take around 3 weeks to produce.
Then they will ship to me,less than a week,hopefully 3 days.
I will have all packaging ready and addressed so just a day or two and I'll have them in the mail.
Once I'm paid for 8-10 of each I'll place the order.
Anyone who is anxious to get building could order all the PCBs needed and have them stuffed by the time the panels arrive-that is what I'm doing.

m.o · Post by **m.o** » Tue Sep 29, 2015 12:42 pm

I'd like one of each (1, 2, 3) + Solo PCB

Please could you give shipping cost for Sweden?

tojpeters · Post by **tojpeters** » Tue Sep 29, 2015 1:45 pm

Overseas shipping will be at cost. Insured shipping with tracking would be expensive. I am shipping trough the USPS-the state run postal service. Throw an extra $25 on there. If it is more I'll bill you,if less I'll refund. On the honor system as we say in this country.

tojpeters · Post by **tojpeters** » Tue Sep 29, 2015 7:19 pm

Here is an example of what I have in mind for wiring diagrams.Some of the more intricate stuff on the Swamp will have more detailed drawings.

yan6 · Post by **yan6** » Tue Sep 29, 2015 7:41 pm

that looks very good and should be easy enough to follow

Barcode · Post by **Barcode** » Tue Sep 29, 2015 10:50 pm

Payment sent! Thanks for making these available.

En_Annan · Post by **En_Annan** » Wed Sep 30, 2015 4:59 am

Payed for panels 1, 2, 3 + solo mod pcb at 30 usd + 25 usd for shipping, a total of 355usd.

Since I wish for a run of another three panels, I decided not to order more than one of each in this run - I don't want to end up with odd numbers of black panels in a calarts-ish casing. Earlier I had an idea of ordering two voice panels, but that would be overkill, even for me.. Anyway

THANKS!

m.o · Post by **m.o** » Wed Sep 30, 2015 12:32 pm

Paid yesterday.

lcf · Post by **lcf** » Thu Oct 01, 2015 3:16 am

Could you add me for a Black Swamp and a pcb too please?

How much do I have to pay with shipping now??

tojpeters · Post by **tojpeters** » Thu Oct 01, 2015 11:13 am

You want a Quicksand and a Swamp+PCB with overseas shipping? $250 should do it.

lcf · Post by **lcf** » Thu Oct 01, 2015 12:23 pm

tojpeters wrote:You want a Quicksand and a Swamp+PCB with overseas shipping? $250 should do it.

Yes, exactly!

Cheers.

lcf · Post by **lcf** » Thu Oct 01, 2015 6:19 pm

Payment made!!

Thanks for doing this Jon!!!

MUFF WIGGLER

MUFF WIGGLER

3 panel black Serge run-Accepting Paypal