NonLinear Circuits - 329 Phase Flange

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: Kent, luketeaford, Joe.

ThomasT
Learning to Wiggle
Posts: 29
Joined: Fri Aug 11, 2017 9:24 am
Location: Boston

Re: NonLinear Circuits - 329 Phase Flange

Post by ThomasT » Mon Mar 29, 2021 10:39 am

Hi All,

I built this but am not able to make it work. Does anyone know I'd use a DMM to do a proper debug? I trimmed the trimpot to stop the clipping which worked some and went ahead and re-soldered any strange areas but other than that, I am stumped.

Also, a few of the open touchpoints got covered in solder - think that is ok?

:guinness: :guinness:

Cheers,
Thomas
:hail: :hail:

ThomasT
Learning to Wiggle
Posts: 29
Joined: Fri Aug 11, 2017 9:24 am
Location: Boston

Re: NonLinear Circuits - 329 Phase Flange

Post by ThomasT » Sat Apr 03, 2021 9:47 am

Bumping for vis

Post Reply

Return to “Music Tech DIY”