[Order] TTSH Shapers Mod

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: Joe., lisa, luketeaford, Kent

User avatar
nosotokarjazzy
Learning to Wiggle
Posts: 29
Joined: Fri Jun 10, 2016 2:48 am

Post by nosotokarjazzy » Tue Nov 21, 2017 1:54 am

It was finally a noob problem ... a ground mistake ... :doh:
The module works perfectly.

I didn't have the courage to drill the panel, so I put the jacks at the bottom of the case.

Thanks a lot fuzzbass :tu:

Image

User avatar
fuzzbass
Super Deluxe Wiggler
Posts: 2050
Joined: Thu Feb 06, 2014 6:08 pm
Location: Florida, USA

Post by fuzzbass » Wed Nov 22, 2017 1:27 pm

:yay:
Wired for weird

jt4tb303
Learning to Wiggle
Posts: 12
Joined: Fri May 22, 2015 4:01 pm
Location: Florida

Post by jt4tb303 » Sun Sep 16, 2018 9:28 am

Hi Fuzzbass,
Are there any kits still available? If so I am interested in purchasing 2. Will PM also.
Cheers!

User avatar
fuzzbass
Super Deluxe Wiggler
Posts: 2050
Joined: Thu Feb 06, 2014 6:08 pm
Location: Florida, USA

Post by fuzzbass » Sun Sep 16, 2018 2:17 pm

Kits are available. Payment is by PayPal. Please PM me your PayPal address and ship to country and I will send you an invoice.
Wired for weird

jt4tb303
Learning to Wiggle
Posts: 12
Joined: Fri May 22, 2015 4:01 pm
Location: Florida

Post by jt4tb303 » Mon Sep 17, 2018 7:11 am

thanks Fuzzbass! PM sent w paypal and shipping address.

User avatar
fuzzbass
Super Deluxe Wiggler
Posts: 2050
Joined: Thu Feb 06, 2014 6:08 pm
Location: Florida, USA

Post by fuzzbass » Thu Sep 20, 2018 11:31 am

Kits are still available. I have made the following adjustments:

1. Removed LM301s and .1uf cap from Mouser cart. Mouser does not sell these parts anymore.

2. Said parts are now included in the partial kit.

3. Price of said partial kit increased from $60 to $65.

What you waitin' for? PM me to buy!
Wired for weird

User avatar
heapish
Veteran Wiggler
Posts: 540
Joined: Mon Mar 11, 2013 5:27 pm
Location: Lancashire UK

Post by heapish » Mon Sep 24, 2018 11:23 am

Just getting to this whats your LM301 source now they are obselete? I'm in europe, are these something that maybe fake if i get them from ebay?

User avatar
fuzzbass
Super Deluxe Wiggler
Posts: 2050
Joined: Thu Feb 06, 2014 6:08 pm
Location: Florida, USA

Post by fuzzbass » Tue Oct 23, 2018 5:53 am

heapish wrote:Just getting to this whats your LM301 source now they are obselete? I'm in europe, are these something that maybe fake if i get them from ebay?
Sorry I missed this last month. In US Tayda and Newark still have LM301 in DIL-8. If you unable to source them, I can send you a couple. PM if interested.
Wired for weird

User avatar
LED-man
Super Deluxe Wiggler
Posts: 1443
Joined: Wed Aug 08, 2012 1:48 pm
Location: Wolfsburg Germany

Post by LED-man » Tue Oct 23, 2018 7:03 am

LM101/201
################################
TTSH Support Page and other DIY Projects:
https://www.DSL-man.de

rempesm
Learning to Wiggle
Posts: 3
Joined: Wed Sep 30, 2015 11:35 pm

TTSH Shapers Mod Kit

Post by rempesm » Tue Nov 26, 2019 7:47 am

Post in error.

User avatar
Kipling
Ultra Wiggler
Posts: 931
Joined: Tue Dec 10, 2013 3:31 pm
Location: South-East England

Re: [Order] TTSH Shapers Mod

Post by Kipling » Tue Feb 25, 2020 9:52 am

Are there any differences between the version here and the "V4" version advertised by Synthcube? I'd like to build one for my Rev 1 TTSH but I'm not sure if Synthcube's V4 is suitable. If not, is there a version that will work with the V1 that can be obtained either via Synthcube or direct from @fuzzbass?

nickbtx
Learning to Wiggle
Posts: 6
Joined: Fri Oct 18, 2019 6:39 am

TTSH Shapers Mod - Drilling the panel

Post by nickbtx » Sun Mar 22, 2020 8:08 pm

I finally got up the courage to drill the holes in my panel for the shapers kit (option 1). I used a technique I've used many times in the past that has served me will. I took a piece of thin sacrifice plywood and drilled holes to align with existing holes as well as the additional holes needed (I cheated and cut the ply template with a laser). I then attached the plywood to the back of the panel with strong double sided tape, e.g. carpet tape, carefully aligning with two of the existing holes. I undersized the holes slightly so the plywood guides the drill bit very accurately in the drill press. Then it's just a matter of prying the plywood/tape off, dressing the edge of the holes, and touching up with a little matte black paint on the inside to prevent rusting (panel is steel). Any way, it worked for me again. Great idea for placement of the holes, Fuzzbass. It looks factory.
You do not have the required permissions to view the files attached to this post.

Post Reply

Return to “Music Tech DIY”