Looking for a builder? Post here!

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: Kent, Joe., luketeaford, lisa

Nidopallium
Common Wiggler
Posts: 61
Joined: Wed Apr 12, 2017 11:13 am
Location: Sheffield

Re: Looking for a builder? Post here!

Post by Nidopallium » Thu Dec 26, 2019 5:40 am

No, I had not thought of that...thanks.

pmarchitect
Wiggling with Experience
Posts: 296
Joined: Fri Sep 23, 2016 3:47 am
Location: London

4x Prok drum builds needed. £100 for London / Kent based solderers!

Post by pmarchitect » Sun Dec 29, 2019 2:36 pm

Hi,

Looking for someone to assemble 4x prok drum modules, London / Kent based as I’d like to drop off and collect personally.

Offering £100 for the work.

Please feel free to move this thread should it be in the wrong place!

Thanks,
Paul

User avatar
co87lab
Common Wiggler
Posts: 90
Joined: Sat Apr 19, 2014 12:33 pm
Location: Romania

Re: Looking for a builder? Post here!

Post by co87lab » Sun Jan 05, 2020 10:44 am

Hello builders,

Looking for a reputable builder in Europe. I have 4 Serge panels with minimal PCBs on hand and component and PCB purchasing will still be required. These are the following systems I am interested in building:

Sturm&Drang Panel (Also known as WAD panel)
-Possess only the sealed Panel + VCO PCB's

TPS, NCS1, NCS2 Panels (Dimitri limited run panels)
-Possess only the sealed Panels + VCO, pot mounting rail and PCB mounting rail PCB's

Please PM me for details and please approach with sincerity only!

Thank you!

User avatar
co87lab
Common Wiggler
Posts: 90
Joined: Sat Apr 19, 2014 12:33 pm
Location: Romania

Re: DIY builders for hire

Post by co87lab » Sun Jan 05, 2020 10:45 am

Hello builders,

Looking for a reputable builder in Europe. I have 4 Serge panels with minimal PCBs on hand and component and PCB purchasing will still be required. These are the following systems I am interested in building:

Sturm&Drang Panel (Also known as WAD panel)
-Possess only the sealed Panel + VCO PCB's

TPS, NCS1, NCS2 Panels (Dimitri limited run panels)
-Possess only the sealed Panels + VCO, pot mounting rail and PCB mounting rail PCB's

Please PM me for details and please approach with sincerity only!

Thank you!

pmarchitect
Wiggling with Experience
Posts: 296
Joined: Fri Sep 23, 2016 3:47 am
Location: London

Re: Looking for a builder? Post here!

Post by pmarchitect » Tue Jan 07, 2020 2:23 pm

I posted in this thread about 4x Prok drum builds and my post is gone? Also the PM response offer from the builder I got is gone too. Can anyone help with this???

grape tony
Veteran Wiggler
Posts: 509
Joined: Wed Jan 05, 2011 11:52 pm

Re: DIY builders for hire

Post by grape tony » Tue Jan 07, 2020 5:35 pm

Looking for someone to build my Jasper Kit.
I have the panel/pcb's from the UK but no BOM. Super open to offers/prices for a good build please DM me! :party:

sawme26
1-Post Wiggler
Posts: 1
Joined: Wed Jan 08, 2020 12:34 pm

Re: Looking for a builder? Post here!

Post by sawme26 » Wed Jan 08, 2020 1:01 pm

Hi I'm looking for a builder that can put together the electronic parts of a rasteri sc1000 for me which would be a sc1000 pcb, A13 som 256, sd card flashed with latest operating system, and innofader mini or if possible the new fretless crossfader setup. I do woodworking as another hobby and have some designs for the case in mind so I can do all the mounting of the sparky bits fader placement, platter build and custom enclosure. If anyone is interested hit me up. I live in Seattle area in the US if that makes any difference to anyone. Thank you
You do not have the required permissions to view the files attached to this post.

toneburst
Ultra Wiggler
Posts: 866
Joined: Fri May 02, 2014 2:41 pm
Location: London

Re: Looking for a builder? Post here!

Post by toneburst » Wed Jan 08, 2020 3:40 pm

pmarchitect wrote:
Tue Jan 07, 2020 2:23 pm
I posted in this thread about 4x Prok drum builds and my post is gone? Also the PM response offer from the builder I got is gone too. Can anyone help with this???
I don't know if someone else got back to you on this before me, but I can do this for you. I sent you a DM about it a few days ago.

I'm in London. Just build a set for myself, so can easily put together another 4.

I can do a few mods that I did to my set too, if you like. DM me for more details.

Alex

pmarchitect
Wiggling with Experience
Posts: 296
Joined: Fri Sep 23, 2016 3:47 am
Location: London

Re: Looking for a builder? Post here!

Post by pmarchitect » Wed Jan 08, 2020 6:19 pm

toneburst wrote:
Wed Jan 08, 2020 3:40 pm
pmarchitect wrote:
Tue Jan 07, 2020 2:23 pm
I posted in this thread about 4x Prok drum builds and my post is gone? Also the PM response offer from the builder I got is gone too. Can anyone help with this???
I don't know if someone else got back to you on this before me, but I can do this for you. I sent you a DM about it a few days ago.

I'm in London. Just build a set for myself, so can easily put together another 4.

I can do a few mods that I did to my set too, if you like. DM me for more details.

Alex
Just DMed you. For some reason any new messages or new sent messages I can’t view after the first time. Annoying!

toneburst
Ultra Wiggler
Posts: 866
Joined: Fri May 02, 2014 2:41 pm
Location: London

Re: Looking for a builder? Post here!

Post by toneburst » Thu Jan 09, 2020 2:49 pm

@pmarchitect there must be something weird going on with your account or something. I haven't received a DM from you.

Have you been able to read the DMs I've sent to you?

If you'd like to go ahead, I'll send you my email address so we can communicate properly, but don't want to post it publicly.

User avatar
coolshirtdotjpg
Super Deluxe Wiggler
Posts: 1451
Joined: Wed May 06, 2015 4:13 pm
Location: Freedom, NH

Re: Looking for a builder? Post here!

Post by coolshirtdotjpg » Thu Jan 09, 2020 2:54 pm

Looking for someone to build a 4MS spectral multiband resonator. I bought it parts/pcbs in expectation that I'd been meeting up for a group build in a spot where I would have access to proper equipment, but the others flaked and stopped responding to me emails. I've spent $150 in parts and now I'm just sitting on them. I would not normally do something like this (Not trying to undercut 4MS, who I have bought a half dozen or products from), I thought I would have the opportunity to learn SMD techniques and now I'm out money and have nothing to show for it.

Would anyone be interested in building one of these? I am obviously willing to pay (within reason) to get it built. Also, if someone wants to take over the whole project and buy it off me, I'm happy to do that--as long as it doesn't violate the rules. More than anything I'd like to get a builder to put this project together so I can finally use it.
New video on Prophet 12 Drone Patches:
Prophet 12 Drone Patches

bygonebotanical
Learning to Wiggle
Posts: 3
Joined: Sat Jan 11, 2020 3:22 am

Re: Looking for a builder? Post here!

Post by bygonebotanical » Sat Jan 11, 2020 3:43 am

Hi there, I'm new here and hoping to find a builder for a DIY Doboz XIIO? :cloud:

Cheers,

User avatar
woodster
Super Deluxe Wiggler
Posts: 1348
Joined: Mon Mar 05, 2012 9:36 am
Location: UK

Re: Looking for a builder? Post here!

Post by woodster » Sun Jan 12, 2020 9:39 am

bygonebotanical wrote:
Sat Jan 11, 2020 3:43 am
Hi there, I'm new here and hoping to find a builder for a DIY Doboz XIIO? :cloud:

Cheers,
Where are you located bygonebotanical ?

I've built a few XIIO's.
Some of the required parts are laborious to source, and can take a while to be delivered from China.

bygonebotanical
Learning to Wiggle
Posts: 3
Joined: Sat Jan 11, 2020 3:22 am

Re: Looking for a builder? Post here!

Post by bygonebotanical » Sun Jan 12, 2020 2:51 pm

woodster wrote:
Sun Jan 12, 2020 9:39 am
bygonebotanical wrote:
Sat Jan 11, 2020 3:43 am
Hi there, I'm new here and hoping to find a builder for a DIY Doboz XIIO? :cloud:

Cheers,
Where are you located bygonebotanical ?

I've built a few XIIO's.
Some of the required parts are laborious to source, and can take a while to be delivered from China.
Hi Woodster,

Thanks for responding, I'm located in Melbourne.

I see, I have next to no knowledge of what's involved. I've built maybe three DIY in my life and they were pretty simp.

AlVal3
1-Post Wiggler
Posts: 1
Joined: Thu Dec 05, 2019 9:17 am
Location: New Haven, CT

Re: Looking for a builder? Post here!

Post by AlVal3 » Wed Jan 22, 2020 3:09 pm

I am looking for someone to build a synthrotek ds-m I was given as a gift. I was going to give it a shot but Synthrotek describes this as advanced so I’m hesitant. I’m located in New Haven CT. Anyone for hire to do this build? I hate to sell it.

reaganry
Learning to Wiggle
Posts: 14
Joined: Sat Aug 03, 2019 7:28 pm
Location: texas

Re: Looking for a builder? Post here!

Post by reaganry » Thu Jan 23, 2020 2:16 pm

bygonebotanical wrote:
Sun Jan 12, 2020 2:51 pm
woodster wrote:
Sun Jan 12, 2020 9:39 am
bygonebotanical wrote:
Sat Jan 11, 2020 3:43 am
Hi there, I'm new here and hoping to find a builder for a DIY Doboz XIIO? :cloud:

Cheers,
any luck? fwiw I destroyed the pads on IC3, so be careful.

bygonebotanical
Learning to Wiggle
Posts: 3
Joined: Sat Jan 11, 2020 3:22 am

Re: Looking for a builder? Post here!

Post by bygonebotanical » Fri Jan 24, 2020 1:10 am

reaganry wrote:
Thu Jan 23, 2020 2:16 pm
bygonebotanical wrote:
Sun Jan 12, 2020 2:51 pm
woodster wrote:
Sun Jan 12, 2020 9:39 am
bygonebotanical wrote:
Sat Jan 11, 2020 3:43 am
Hi there, I'm new here and hoping to find a builder for a DIY Doboz XIIO? :cloud:

Cheers,
any luck? fwiw I destroyed the pads on IC3, so be careful.
No luck as yet, oh damb that not good! 😯

User avatar
KlangGenerator
Common Wiggler
Posts: 142
Joined: Fri Feb 03, 2017 2:35 pm
Location: Cologne, Germany

Re:

Post by KlangGenerator » Sun Jan 26, 2020 9:56 am

todd_r wrote:
Wed Jan 16, 2019 6:56 pm
Hello,

would someone like to build me an Oakley SRE330 :)

Am in the UK

Thanks
Michael
I have recently built two units. One will be for sale in a few weeks. It just needs to be fitted inside the 1u rack. Price is 1000€ plus shipping. If you're interested get in touch with me via service@klanggenerator.com

https://www.instagram.com/p/B3wKia4I7V0

User avatar
wendallsan
Wiggling with Experience
Posts: 379
Joined: Thu Jul 04, 2019 1:06 pm
Location: Olympia, WA, USA

Re: Looking for a builder? Post here!

Post by wendallsan » Tue Jan 28, 2020 11:11 am

I bought 4 Twist PCB's and parts for them. I've done a bit of 0805 and 0604 SMD soldering, but the 32 bit chip and the audio codec chip for these boards are WAAAAY too fine for me to properly solder using my crude tools.

:bang:

I totally destroyed 2 boards and chips trying, and know when I'm licked.

:deadbanana:

I'd like to hire someone who knows what they're doing with these super-fine SMD IC's to solder the 32 bit chip and codec chip onto my 2 remaining boards. I think I can manage the rest of the build myself (or am at least willing to try). Please PM me with offers and/or rates and we'll talk!

:75:
Currently building a whole mess of modules by Nonlinear Circuits. Troubleshooting a Nonlinear Circuits Sauce of Unce.

User avatar
huffnPuff
Super Deluxe Wiggler
Posts: 1697
Joined: Sun Jun 05, 2016 9:50 pm

Re: Looking for a builder? Post here!

Post by huffnPuff » Fri Feb 14, 2020 8:53 am

Looking for a builder to build several 4hp LZX Castle modules. I can provide the panels and PCBs, but sourcing the parts and building the modules is beyond me.

The modules in question-

Castle 000 ADC
Castle 001 DAC
Castle 011 Shift Register
Castle 101 Quad Gate (as a quad XOR)

I am in Tel Aviv, if you're in Israel it's a big plus. Please PM if interested.

Cheers.

steviet
Wiggling with Experience
Posts: 316
Joined: Wed Oct 17, 2018 9:47 am
Location: Montréal
Contact:

Re: Looking for a builder? Post here!

Post by steviet » Wed Feb 19, 2020 10:38 am

Looking for someone who can create acrylic display windows for some of my DIY modules. Something like this:

https://synthcube.com/cart/display-win ... ption=true

Right now I need 2 Braids, 2 Yarns, and 2 Westlicht Performer clear acrylic display windows.

Preferably in Canada, but anywhere is fine by me as long as the shipping is cheap. PM me or contact me through my website/email there.
Soundcloud
Website - DIY/Euro/Gear Blog updated every Sunday

User avatar
lionelfischer
Super Deluxe Wiggler
Posts: 1219
Joined: Mon Sep 07, 2009 2:12 am
Location: Maryland

Re: Looking for a builder? Post here!

Post by lionelfischer » Thu Feb 20, 2020 6:35 pm

I have a midi controller concept for live lighting controls id like to be custom built. I have some specific thoughts on things like fader size/spacing, aesthetic etc once we get into the details..

It's kinda like novation launch control XL with more knobs and buttons.

I'm in Washington DC. Have an ok budget
Last edited by lionelfischer on Wed Mar 04, 2020 2:44 am, edited 1 time in total.

moogah
Wiggling with Experience
Posts: 444
Joined: Mon Nov 22, 2010 10:27 am

Re: Looking for a builder? Post here!

Post by moogah » Sat Feb 22, 2020 4:03 am

I've got a uJove PCB and panel from Pusherman and the parts, but don't have the time to assemble it (.. the SMT is a problem for me). If someone with experience is available to do it, please dm me.

User avatar
registeredwiggler
Common Wiggler
Posts: 106
Joined: Sun Dec 27, 2015 11:53 pm

Re: Looking for a builder? Post here!

Post by registeredwiggler » Sun Mar 01, 2020 9:37 pm

Hi,

Live in NYC, USA area. Looking for someone to build a Westlicht Per|Former.

https://westlicht.github.io/performer/

Anyone have any experience with these?

Cheers!

User avatar
hinterlands303
Ultra Wiggler
Posts: 887
Joined: Wed May 14, 2014 3:57 pm
Location: Detroit

Re: Looking for a builder? Post here!

Post by hinterlands303 » Mon Mar 02, 2020 11:46 am

I'm looking for someone to build a DIY breakout for a Vermona Mono Lancet 15. I'm in the U.S. (Detroit). Here's the thread for info:

https://www.muffwiggler.com/forum/viewtopic.php?t=58684

Post Reply

Return to “Music Tech DIY”