Steda Electronics SR-909 Full kit

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: Kent, luketeaford, Joe.

User avatar
LED-man
Super Deluxe Wiggler
Posts: 1540
Joined: Wed Aug 08, 2012 1:48 pm
Location: Wolfsburg Germany
Contact:

Re: 909 Drum Machine REPLICA build thread

Post by LED-man » Sat Jun 06, 2020 9:11 am

Since DinSync Andreas Kump and Christian Hartig released a real Replica (RE-909) it should be better to give your device a Name and change the thread title here to avoid confusion with this both 909 devices ?
################################
TTSH Support Page and other DIY Projects:
https://www.DSL-man.de

steda
Learning to Wiggle
Posts: 31
Joined: Thu Dec 26, 2019 3:38 am

Re: Steda Electronics SR-909 build thread

Post by steda » Tue Jun 09, 2020 12:58 pm

SR-909 ready for pre-orders

order here www.stedaelectronics.com

User avatar
kragg
Veteran Wiggler
Posts: 506
Joined: Thu Dec 15, 2011 2:42 pm
Location: Nemo Point

Re: Steda Electronics SR-909 ready for pre-orders

Post by kragg » Tue Jun 09, 2020 1:39 pm

Nice !
Is there any webpage with more informations?
for instance :
- is there anything changed/added/improved/removed from the original 909? Any added sound parameters ? Any change to the sequencer?
- Is there Midi triggering of the notes, USB, triggers?
- Is there any "hard to source" components?
- Do you have any plan to provide an enclosure for it?

steda
Learning to Wiggle
Posts: 31
Joined: Thu Dec 26, 2019 3:38 am

Re: Steda Electronics SR-909 ready for pre-orders

Post by steda » Wed Jun 10, 2020 3:32 am

Hello!
This is replica. no changes on sound board and sequencer board.
909 has few rare parts but we have solutions)
Check our facebook page or website
links in first post
kragg wrote:
Tue Jun 09, 2020 1:39 pm
Nice !
Is there any webpage with more informations?
for instance :
- is there anything changed/added/improved/removed from the original 909? Any added sound parameters ? Any change to the sequencer?
- Is there Midi triggering of the notes, USB, triggers?
- Is there any "hard to source" components?
- Do you have any plan to provide an enclosure for it?

User avatar
kragg
Veteran Wiggler
Posts: 506
Joined: Thu Dec 15, 2011 2:42 pm
Location: Nemo Point

Re: Steda Electronics SR-909 ready for pre-orders

Post by kragg » Wed Jun 10, 2020 3:57 am

Hi, thank you for your answer.
steda wrote:
Wed Jun 10, 2020 3:32 am
Check our facebook page or website
links in first post
I did, but i have no IG or FB, and therefore i have registration nag popup windows keeping on annoying me, and keeping me from seeing your IG pictures.
And the website seems to link only to a webshop page, without BoM, build instructions or technical specifications :despair:

User avatar
batchas
Super Deluxe Wiggler
Posts: 4987
Joined: Wed Nov 09, 2011 2:51 pm

Re: Steda Electronics SR-909 ready for pre-orders

Post by batchas » Wed Jun 10, 2020 2:48 pm

IMHO it is very useful to see a BOM. Personally I look at the BOM first before deciding to order a project or not. Not only to see what parts are needed (and compare with current stock at home for instance), but mostly to have an idea of the costs.
-----------------------------------
FS: KESAKO Player & Reverb for Serge and Buchla

User avatar
batchas
Super Deluxe Wiggler
Posts: 4987
Joined: Wed Nov 09, 2011 2:51 pm

Re: Steda Electronics SR-909 ready for pre-orders

Post by batchas » Wed Jun 10, 2020 2:51 pm

kragg wrote:
Wed Jun 10, 2020 3:57 am
i have no IG or FB, and therefore i have registration nag popup windows keeping on annoying me, and keeping me from seeing your IG pictures.
There's afaik not more info than on the site, so you didn't miss much. Dates, prices are anounced on FB.
Also a message about the fact that every kit will include OS V4 chip and that ba662 clone PCBs will be added as bonus.
-----------------------------------
FS: KESAKO Player & Reverb for Serge and Buchla

User avatar
kragg
Veteran Wiggler
Posts: 506
Joined: Thu Dec 15, 2011 2:42 pm
Location: Nemo Point

Re: Steda Electronics SR-909 ready for pre-orders

Post by kragg » Wed Jun 10, 2020 2:57 pm

batchas wrote:
Wed Jun 10, 2020 2:48 pm
IMHO it is very useful to see a BOM. Personally I look at the BOM first before deciding to order a project or not. Not only to see what parts are needed (and compare with current stock at home for instance), but mostly to have an idea of the costs.
Yes, I often do the same.
batchas wrote:
Wed Jun 10, 2020 2:48 pm
There's afaik not more info than on the site, so you didn't miss much. Dates, prices are anounced on FB.
Thank you for your confirmation.
Argh, too bad it's on FB & IG only, as I managed to stay away from Zuckerberg's softwares for years :(
Once, internet was an open place, and being a member of a site wasn't required to get even the simplest informations :zombie:
I do hope that Steda electronics will put informations, technical specifications, BoM and other things on a public site somewhere soon.

User avatar
synthetek
Veteran Wiggler
Posts: 550
Joined: Fri Jun 05, 2015 3:32 am
Location: Orange County, California
Contact:

Re: Steda Electronics SR-909 ready for pre-orders

Post by synthetek » Wed Jun 10, 2020 3:20 pm

batchas wrote:
Wed Jun 10, 2020 2:48 pm
IMHO it is very useful to see a BOM. Personally I look at the BOM first before deciding to order a project or not. Not only to see what parts are needed (and compare with current stock at home for instance), but mostly to have an idea of the costs.
Check out the 909 service manual, it has the BOM. There will probably be some alternatives to some of the original parts but the service manual will give you an idea of what is needed.

User avatar
Altitude909
Super Deluxe Wiggler
Posts: 3690
Joined: Wed Aug 24, 2011 5:13 pm
Location: Meesheegan

Re: Steda Electronics SR-909 ready for pre-orders

Post by Altitude909 » Wed Jun 10, 2020 4:20 pm

Might be a good idea to get OML's blessing on bundling the BA Clown

User avatar
batchas
Super Deluxe Wiggler
Posts: 4987
Joined: Wed Nov 09, 2011 2:51 pm

Re: Steda Electronics SR-909 ready for pre-orders

Post by batchas » Thu Jun 11, 2020 12:21 am

kragg wrote:
Wed Jun 10, 2020 2:57 pm
Argh, too bad it's on FB & IG only, as I managed to stay away from Zuckerberg's softwares for years :(
Same here. On FB since a few months only, primarly because I needed to contact a person!
-----------------------------------
FS: KESAKO Player & Reverb for Serge and Buchla

steda
Learning to Wiggle
Posts: 31
Joined: Thu Dec 26, 2019 3:38 am

Re: Steda Electronics SR-909 ready for pre-orders

Post by steda » Wed Jun 24, 2020 9:07 am

We don't sell them. We will add them for free
Altitude909 wrote:
Wed Jun 10, 2020 4:20 pm
Might be a good idea to get OML's blessing on bundling the BA Clown

Kevin Mitchell

Re: Steda Electronics SR-909 ready for pre-orders

Post by Kevin Mitchell » Wed Jun 24, 2020 1:34 pm

Oh boy. Been in the market for a drum machine and would love to assemble one!
Totally on board!

-KM

djs
Super Deluxe Wiggler
Posts: 1219
Joined: Wed Sep 01, 2010 8:36 am
Location: South Beloit, IL

Re: Steda Electronics SR-909 ready for pre-orders

Post by djs » Sat Jul 18, 2020 10:00 am

Any update on this? Does anyone have these in the wild?
"Noise is what the Earth is made of" - David Bowie

steda
Learning to Wiggle
Posts: 31
Joined: Thu Dec 26, 2019 3:38 am

Re: Steda Electronics SR-909 ready for pre-orders

Post by steda » Thu Aug 06, 2020 12:57 pm

We have some news)
Attachments
SR909_MB_04.jpg

steda
Learning to Wiggle
Posts: 31
Joined: Thu Dec 26, 2019 3:38 am

Re: Steda Electronics SR-909 ready for pre-orders

Post by steda » Sat Aug 29, 2020 4:48 am

Cases
Attachments
333D9421-028B-49A1-A41F-A946A888250D.jpeg
0515372B-687F-4CE9-A7F4-698CF69C8EF9.jpeg

User avatar
tobb
Super Deluxe Wiggler
Posts: 1085
Joined: Sat Nov 26, 2011 5:41 am

Re: Steda Electronics SR-909 ready for pre-orders

Post by tobb » Sat Aug 29, 2020 6:41 am

NICE!

User avatar
kragg
Veteran Wiggler
Posts: 506
Joined: Thu Dec 15, 2011 2:42 pm
Location: Nemo Point

Re: Steda Electronics SR-909 ready for pre-orders

Post by kragg » Sat Aug 29, 2020 3:59 pm

Nice indeed !

steda
Learning to Wiggle
Posts: 31
Joined: Thu Dec 26, 2019 3:38 am

Re: Steda Electronics SR-909 kits in stock

Post by steda » Mon Aug 31, 2020 4:01 am

Kits in stock)

User avatar
funzel
Learning to Wiggle
Posts: 14
Joined: Wed Aug 23, 2017 2:36 pm
Location: Netherlands

Re: Steda Electronics SR-909 kits in stock

Post by funzel » Mon Aug 31, 2020 4:24 am

Hi looks like a great project. I don't see a case for sale yet. When will this be available? Does anyone have a rough estimate what components will cost for a complete build?

Portabella
Wiggling with Experience
Posts: 422
Joined: Sun Oct 22, 2017 4:03 pm
Location: EU/UK

Re: Steda Electronics SR-909 kits in stock

Post by Portabella » Mon Aug 31, 2020 3:10 pm

can we see the BOM now please???

djs
Super Deluxe Wiggler
Posts: 1219
Joined: Wed Sep 01, 2010 8:36 am
Location: South Beloit, IL

Re: Steda Electronics SR-909 kits in stock

Post by djs » Mon Aug 31, 2020 3:15 pm

The bom is out there for the sequencer already:

https://diystudiotoys.com/products/sq-9 ... -board-kit
"Noise is what the Earth is made of" - David Bowie

aabbcc
Wiggling with Experience
Posts: 314
Joined: Fri Feb 02, 2018 10:47 am
Location: Sweden

Re: Steda Electronics SR-909 kits in stock

Post by aabbcc » Mon Aug 31, 2020 4:41 pm

Anyone actually pulled the trigger yet?

steda
Learning to Wiggle
Posts: 31
Joined: Thu Dec 26, 2019 3:38 am

SR-909 Full kits ready for pre-orders!

Post by steda » Sun Sep 06, 2020 8:47 am

SR-909 Full kits ready for pre-orders!
price $909

Kit will include:
Main board
Sequencer board
Output board
Midi/Sync board
Power supply board
DAC boards
Cherry switches
Cherry switches caps
Small Switches
Small Switches caps
7 Segments displays
All Potentiometers
All ICs
All Transistors
Power Transformer
All connectors
Steel Case (Powder coated and silkscreened)
All resistors
CPU
All Film Capacitors (Nichicon)
All Electrolityc Capacitors (Elna, Panasonic, Epcos)
We have 4 colors for Displays and LEDs.
RED, GREEN, YELLOW and BLUE.
Shiping October 15

User avatar
funzel
Learning to Wiggle
Posts: 14
Joined: Wed Aug 23, 2017 2:36 pm
Location: Netherlands

Re: Steda Electronics SR-909 Full kit 909 days offer! $909

Post by funzel » Tue Sep 08, 2020 6:43 am

Interested in ordering pcb's with partial kit. But if I order it would be nice to have the case with it. When will it be available?

Post Reply

Return to “Music Tech DIY”