The 2020 Show Us Your DIY Builds Thread!

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: lisa, Kent, Joe.

User avatar
bitflip
Veteran Wiggler
Posts: 734
Joined: Sun Dec 14, 2014 10:19 pm
Location: in the series of tubes

Re: The 2020 Show Us Your DIY Builds Thread!

Post by bitflip » Wed Feb 12, 2020 10:22 pm

@gnsk : fookinamazeballs :woah: :hail:

User avatar
Noodle Twister
Common Wiggler
Posts: 183
Joined: Wed Jan 02, 2019 10:22 pm
Location: UK

Re: The 2020 Show Us Your DIY Builds Thread!

Post by Noodle Twister » Fri Feb 14, 2020 3:17 am

BadPixel wrote:
Fri Feb 07, 2020 4:44 pm
Awesome stuff, all :sb: Love the case Mkeys :love: Been pondering whether to do a plexi case for the TTSH or not.

How’s the Zlob VCA, Noodle Twister? That’s a lot of VCA’s on a very small space :tu:
I don't know how I managed without it but it's very likely I will build another at some point. :tu:

User avatar
sduck
experimental use of gravity
Posts: 13331
Joined: Wed Feb 18, 2009 6:03 pm
Location: Vortepexaion, TN, USA

Re: The 2020 Show Us Your DIY Builds Thread!

Post by sduck » Fri Feb 14, 2020 10:16 pm

Finally finished this.
_DSC1392-2.jpg
Still needs to come apart one more time to have the stereo out mod applied when that's ready.
You do not have the required permissions to view the files attached to this post.
flickr cloud of sound touyube NOT A MODERATOR ANYMORE

User avatar
Reese P. Dubin
Super Deluxe Wiggler
Posts: 1326
Joined: Wed Dec 17, 2008 12:33 pm
Location: Absolute Elsewhere

Re: The 2020 Show Us Your DIY Builds Thread!

Post by Reese P. Dubin » Sat Feb 15, 2020 10:01 am

About to start mine this week. Been staring at the PCBs coming up with a plan.

Got any tips? Probably going with building the control board/main board/power/out/voices

:bang: forgot im in the glamour shots, and not a build thread DISREGARD !

User avatar
soup
Veteran Wiggler
Posts: 504
Joined: Sun Dec 04, 2011 9:14 pm

Re: The 2020 Show Us Your DIY Builds Thread!

Post by soup » Sun Feb 16, 2020 7:27 pm

Thomas Henry SN Voice in frac rack...
You do not have the required permissions to view the files attached to this post.

User avatar
SlightlyNasty
Common Wiggler
Posts: 197
Joined: Wed Nov 25, 2015 9:18 pm
Location: Adelaide, Australia

Re: The 2020 Show Us Your DIY Builds Thread!

Post by SlightlyNasty » Sun Feb 16, 2020 7:46 pm

Your panels are always stunning, soup!
www.slightlynasty.com - 4U DIY Modules for the Loudest Warning format

User avatar
sduck
experimental use of gravity
Posts: 13331
Joined: Wed Feb 18, 2009 6:03 pm
Location: Vortepexaion, TN, USA

Re: The 2020 Show Us Your DIY Builds Thread!

Post by sduck » Sun Feb 16, 2020 10:06 pm

Reese P. Dubin wrote:
Sat Feb 15, 2020 10:01 am
About to start mine this week. Been staring at the PCBs coming up with a plan.

Got any tips? Probably going with building the control board/main board/power/out/voices
I don't care I'll give you my two cents here anyway. What I did - built up 2 voice cards. Then, the power, main board and interface board and rear in/out board. Then, get it all put together, program the thing, make sure the 2 voice cards work. then attack the other cards. I find I can do 2-3 voice cards at a time - more than that and I lose track of what i'm doing. This way you'll at least have a working device early on, and can get a feel for how it works. Also, check out the Kijimi build group over on facebook if you can - that's where the bulk of build info happens - there's a thread here, but it's completely dead.

There's an issue with the voice cards that you need to deal with, and some BOM changes to get the voice cards working optimally. Also a stereo out mod that you might want. You can find out about that stuff on facebook, or post about it here in the build thread, and I or someone wil ltry to help out.
flickr cloud of sound touyube NOT A MODERATOR ANYMORE

User avatar
PHOBoSapiens
Common Wiggler
Posts: 52
Joined: Tue Jul 19, 2016 1:09 pm
Location: Moon Base
Contact:

Re: The 2020 Show Us Your DIY Builds Thread!

Post by PHOBoSapiens » Tue Feb 18, 2020 9:50 am

gnsk wrote:
Tue Feb 11, 2020 5:08 am
Image
so that's what insanity looks like,. well done!
:yay:
"My perf, it's full of holes!"

User avatar
BadPixel
Learning to Wiggle
Posts: 31
Joined: Tue Nov 06, 2018 8:23 am
Location: Stockholm, Sweden

Re: The 2020 Show Us Your DIY Builds Thread!

Post by BadPixel » Thu Feb 20, 2020 5:12 am

Noodle Twister wrote:
Fri Feb 14, 2020 3:17 am
BadPixel wrote:
Fri Feb 07, 2020 4:44 pm
How’s the Zlob VCA, Noodle Twister? That’s a lot of VCA’s on a very small space :tu:
I don't know how I managed without it but it's very likely I will build another at some point. :tu:
Awesomesauce! Enough to convince me I need to build (at least) one :sb:
sduck wrote:
Fri Feb 14, 2020 10:16 pm
Finally finished this.
_DSC1392-2.jpg
Still needs to come apart one more time to have the stereo out mod applied when that's ready.
Oooooh, sexi!! :tu:

User avatar
nimets
Learning to Wiggle
Posts: 9
Joined: Wed Mar 30, 2016 1:05 pm
Location: Germany

Re: The 2020 Show Us Your DIY Builds Thread!

Post by nimets » Fri Feb 21, 2020 3:23 pm

I have been soldering the Ginkosynthese Sampleslicer mk II DIY kit.

Very nice build and cool module.
Next is Voltage Runner.
IMG_9617sm.png
You do not have the required permissions to view the files attached to this post.

Post Reply

Return to “Music Tech DIY”