Befaco Muxlicer not accepting external clock

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: Joe., lisa, luketeaford, Kent

Post Reply
vaxdatex
Learning to Wiggle
Posts: 13
Joined: Fri Jul 05, 2019 9:56 am
Location: Seattle

Befaco Muxlicer not accepting external clock

Post by vaxdatex » Wed Dec 18, 2019 8:49 pm

Hi,

I just finished a Muxlicer from Befaco. Everything seems to work OK so far with the exception of external clock.
When I plug in a patch cable the internal sequence even stops running but external clock has no effect. This is the second time I built this module but unfortunately Befaco have not made the schematics public yet for the current version (v1.3) of the board.

Anybody have any ideas where to start or at least where to find the schematics? Still waiting on response from Befaco but experience shows this can take a while.

Thanks

odmundeetgen
Learning to Wiggle
Posts: 4
Joined: Wed Oct 09, 2019 11:16 am
Location: London

Re: Befaco Muxlicer not accepting external clock

Post by odmundeetgen » Sun Mar 22, 2020 7:23 am

Hi I'm in a similar position, tried clocking with Keystep, DFAM and a rampage but nothing. Have gone over circuit again double checking all soldering joints but all looks good to me. I was wondering if you ever got a responce from Befaco?

Post Reply

Return to “Music Tech DIY”