STLink V2 on Linux

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: Kent, Joe., luketeaford, lisa

Post Reply
StrangeCaptain
Common Wiggler
Posts: 108
Joined: Sun Sep 15, 2019 8:19 am
Location: Detroit

STLink V2 on Linux

Post by StrangeCaptain » Sun Mar 15, 2020 4:23 pm

Howdy!
I have redently made the leap to Arch Linux (mostly) full time.
I'm an IT Guy in a wondows shop so I have no shortage of Micosoft OSs available but I want to use Linux as much as possible

has anyone macged to Flash a DIY MI Module with an STLink V2 on Linux?
I tried QSTLlink2 and get the Error STLinkV2/ Nucleo not foun did you insall udev rules?

I am xhasing htat down seperately but thought I would ask here asa i think there is more that one way to do this.
thanks!!!

User avatar
akashic53
Learning to Wiggle
Posts: 6
Joined: Thu Sep 29, 2016 7:22 pm
Location: Toronto

Re: STLink V2 on Linux

Post by akashic53 » Thu Mar 26, 2020 10:58 am

Hi,
After using an Olimex JTAG debugger for years, I recently started to use the STLink on a discovery board to flash MI modules in the MI development VM, which is Linux. This uses OpenOCD and to get it working, I had to change to the STLink V2.1 config. STLink V2 would not work.

Post Reply

Return to “Music Tech DIY”