909 EPROM :help:

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: Joe., lisa, luketeaford, Kent

Post Reply
oer23
Learning to Wiggle
Posts: 2
Joined: Mon Mar 02, 2020 9:39 am

909 EPROM :help:

Post by oer23 » Sat Mar 21, 2020 6:32 am

Hello there.
I'm going to build a 909 clone, I found the ICs 27C256 but I don't find anymore the hex files sample for the Hit-Hat, Ride and Crash on the web and I'm no longer on Facebook so I can't leave a message on the 909 group for my request.
So if you have these files in your HDD, I will very happy to steal them from you :mrgreen:
Thanks in advance guys :mrgreen:

User avatar
dot matrix madness
Wiggling with Experience
Posts: 358
Joined: Fri Aug 23, 2013 2:48 am
Location: Germany

Re: 909 EPROM :help:

Post by dot matrix madness » Sat Mar 21, 2020 7:05 am

This site has the eprom files:
9090 Analogue Drum Synth
Hope these are in the required format.
Licenced to solder since 1993

oer23
Learning to Wiggle
Posts: 2
Joined: Mon Mar 02, 2020 9:39 am

Re: 909 EPROM :help:

Post by oer23 » Sat Mar 21, 2020 11:12 am

Thank you very much for this link. I read they talk about ".hex" files, here it's ".bin", but they come from the 9090project page, and at the beginning there was the original sample files so...
A new big thanks for the link!!!

Post Reply

Return to “Music Tech DIY”