On yusynth schematics, what is this symbol?

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: lisa, luketeaford, Kent, Joe.

Post Reply
groffcole
Learning to Wiggle
Posts: 11
Joined: Sun May 31, 2020 2:19 am

On yusynth schematics, what is this symbol?

Post by groffcole » Thu Jun 25, 2020 10:10 pm

I'm looking at the yusynth Minimoog VCF clone module and I'm wondering what the J2a, J2b, J2c, J3c, J3d, J3e, J3a, J3b, and J3f symbols mean.

Attached is a screenshot and here is the schematic: http://yusynth.net/Modular/Commun/MOOGV ... er-sch.pdf

screenshot
You do not have the required permissions to view the files attached to this post.

User avatar
marfoski
Common Wiggler
Posts: 93
Joined: Fri Aug 26, 2011 8:06 am
Location: Italy

Re: On yusynth schematics, what is this symbol?

Post by marfoski » Thu Jun 25, 2020 10:24 pm

The pins of the connectors that lead to the potentiometers and the jacks on the pcb, whose edge is here represented by the blue line.

groffcole
Learning to Wiggle
Posts: 11
Joined: Sun May 31, 2020 2:19 am

Re: On yusynth schematics, what is this symbol?

Post by groffcole » Fri Jun 26, 2020 9:23 am

Oh! I see. That makes sense. If I weren't using pins like the pcb, I wouldn't necessarily need that part as diagrammed in the schematic - I could just have a wire connected directly to the jack or pot.

Elahrairah
Learning to Wiggle
Posts: 24
Joined: Sat May 02, 2020 12:25 pm

Re: On yusynth schematics, what is this symbol?

Post by Elahrairah » Fri Jun 26, 2020 12:04 pm

A lot of people like to have connectors between the front panel and the PCB so you can remove them and do maintenance work without desoldering.
You do not have the required permissions to view the files attached to this post.

Post Reply

Return to “Music Tech DIY”