200X Buchla upgraded serie 208X 259X 258X 207X

[buchlaistic]

I see...so Samodular is located in Germany? Good to know in case I need some knobs or so :-)

Reason for asking was...France (where Boops is located) has an abundance of rules and different tax categories for running small businesses..I've lived there for 5 years.

Yes same here. Tons of rules but you have to deal with it if you want to run a legit business.

[weedywhizz]

I see...so Samodular is located in Germany? Good to know in case I need some knobs or so :-)

Reason for asking was...France (where Boops is located) has an abundance of rules and different tax categories for running small businesses..I've lived there for 5 years.

Yes same here. Tons of rules but you have to deal with it if you want to run a legit business.

. Basically everywhere in the EU I guess.

[Radiance2021]

Well, compared to France, the Netherlands is a breeze...

[boops]

FYI

French people like me use to choose for small bizness a statut,called ‘auto entrepreneurs’ or micro entreprise before starting with a company,with some differents limits,pic attached ,following the nature of the bizness.

There is no vat Id ,its called ‘siret and siren number’ ,we have to declare our ‘chiffre d’affaire’ and then pay fees ,Tva at some point ,fees for our old days and health protection.
Rules needed for a web store is a different subject.



Now please guys open another thread with these subjects elsewhere
Here it’s the diy section,thanks

Light aluminium 208X Reverb frame
And the pcb adaptator for nos great transfo for 207X

Nice layout for pc pin and solder pin toggle switches
The 56 black edge connector included,you will need a standard blue one , easy to find for the mother board under the panel

The big build soon;)

Card 1 with the reset sq cv
Card 9 with its mods

[ashleym]

Well, compared to France, the Netherlands is a breeze...

Dont depress me, I am in the UK.........its so messed up here, no amount of "I told you so" will save us

[DanaFo]

Well, compared to France, the Netherlands is a breeze...

Dont depress me, I am in the UK.........its so messed up here, no amount of "I told you so" will save us

did you fill out the appropriate forms to post that?

[Radiance2021]

I'm very excited to start building this project. Sorry for the OT!

[Radiance2021]

Any news on the groupbuys?

[beautyofdecay_]

Can the AUX/Noise PCB be used with a 208p build or is it specific to your 208x version?

[boops]

Can the AUX/Noise PCB be used with a 208p build or is it specific to your 208x version?

Hi
No it is designed to the 4UX boat,but can be used everywhere with any external source ,it uses the clean 5v +/-15V
Of the micro psu pcb,available too.

[boops]

Any news on the groupbuys?

I offer now a hardware kit ,I ve bought some parts Needed, ,pm me for details
With the chineese new year,the covid. Things are slower ,please be patient.

[Radiance2021]

PM send...& I understand. Thanks for all the effort!

[boops]

PM send...& I understand. Thanks for all the effort!

Thanks
A little pic of the rare parts arrived today,the Jfet transistors used in an original 208
golden leg party,no chineese crappy clone here

[DanaFo]

https://store.synthrotek.com/VTL5C3-Vac ... p_792.html

would this work for the buchla vactrols? how many are req'd for the 208x kit?

[boops]

https://store.synthrotek.com/VTL5C3-Vac ... p_792.html

would this work for the buchla vactrols? how many are req'd for the 208x kit?

how many are req'd for the 208x kit?

??????


I know these,fake ones,from Canada go to synthcube ,TAKE XVIVE 11 single VTL5C3 and 2 dual VTL5C3/2

[DanaFo]

https://store.synthrotek.com/VTL5C3-Vac ... p_792.html

would this work for the buchla vactrols? how many are req'd for the 208x kit?

how many are req'd for the 208x kit?

??????


I know these,fake ones,from Canada go to synthcube ,TAKE XVIVE 11 single VTL5C3 and 2 dual VTL5C3/2



4FD2887E-91F8-4C93-999E-62C77A32B959.png

so:
11 x Vtl5c3
2x vtl5c3/2

[boops]

Exactly ...10 for the original design and one more for the reverb cv control (X mod)
The dual 3/2 (2 single matched )are used for the card 10 and 11 function : Low pass gate ,then no need to match 2 singles vtl5c3
You will find this info soon on the build thread.

I think you will find switches color caps too at syntcube,following your personal finish

[DanaFo]

Exactly ...10 for the original design and one more for the reverb cv control (X mod)
The dual 3/2 (2 single matched )are used for the card 10 and 11 function : Low pass gate ,then no need to match 2 singles vtl5c3
You will find this info soon on the build thread.

I think you find switches color caps too at syntcube,following your personal finish

great, I appreciate it!

[bemerritt]

Boops, building a small buchla (259, 281, 292, 266, 257). I see 259 in the first post, any rough timeline on that? Any chance any of the others get the X treatment?

THanks!

[boops]

Boops, building a small buchla (259, 281, 292, 266, 257). I see 259 in the first post, any rough timeline on that? Any chance any of the others get the X treatment?

THanks!

Hi
The 259X is available right now pm me,thanks

For the X treatment,it’s a long work sometime,208X,259X,we hope to offer these too,with a build support of course.

[Cablebasher]

Looking forward to the website and getting to build a 259 soon.

[boops]

For Buchla 200 serie build

Another really good place to order parts like vactrol VTL5C3 ,pot 16mm right angle alpha,resistor,capacitor etc
Smallbear
Link for some different vactrols
http://smallbear-electronics.mybigcomme ... lx-series/
http://smallbear-electronics.mybigcomme ... -vtl5c3-2/

Or

https://www.ebay.fr/itm/Xvive-Audio-VTL ... 1920576160

Or for a group buy order I’m in if someone want to manage it.
https://cabintechglobal.com/semi

VTL5C3. Opto-Coupler Axial-4 Xvive you need 15 for a 208X 14 for an original 208
VTL5C3-2 Opto-Coupler Axial-5. Xvive out of stock

[boops]

259X build thread is opened

viewtopic.php?f=17&t=244920&p=3466227#p3466227

Boms of the 208X
viewtopic.php?f=17&t=243936&p=3465988#p3465988