Post pics of your DIY setup!

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: Joe., lisa, luketeaford, Kent

Post Reply
User avatar
audioCTRL
Wiggling with Experience
Posts: 381
Joined: Wed Jun 09, 2010 2:40 am
Location: cph

Re:

Post by audioCTRL » Sun Mar 22, 2020 1:12 pm

andrewF wrote:
Wed Dec 29, 2010 7:58 pm
its a real shit trying to wire down in the crotch region......
basically made a door out of the back (same for the back of the head)
the boards are stacked and bolted all over the place

Image

Image
BLAST FROM THE PAST!
:yay: :yay: :yay: :yay:

User avatar
snevlida14
Common Wiggler
Posts: 138
Joined: Sat Mar 01, 2014 6:44 pm

Re: Post pics of your DIY setup!

Post by snevlida14 » Sun Mar 22, 2020 8:17 pm

wtk wrote:
Fri Mar 06, 2020 6:23 am
040B wrote:
Fri Mar 06, 2020 4:10 am

What kind of psu are you using? Are you running all modules on 5v?
as i wrote, seismic ips2.. http://seismic.industries/ips2/
Image
nice little psu, although the layout could be better for in-case mounting. Maybe i will make some similar later with different layout.
with these modules i measured current around 1,7A from the usb, so it can run quite long time with this 20ah bank.
That standoff idea is baller

Post Reply

Return to “Music Tech DIY”