Post pics of your DIY setup!

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: lisa, luketeaford, Kent, Joe.

Post Reply
User avatar
audioCTRL
Wiggling with Experience
Posts: 387
Joined: Wed Jun 09, 2010 2:40 am
Location: cph
Contact:

Re:

Post by audioCTRL » Sun Mar 22, 2020 1:12 pm

andrewF wrote:
Wed Dec 29, 2010 7:58 pm
its a real shit trying to wire down in the crotch region......
basically made a door out of the back (same for the back of the head)
the boards are stacked and bolted all over the place

Image

Image
BLAST FROM THE PAST!
:yay: :yay: :yay: :yay:

User avatar
snevlida14
Common Wiggler
Posts: 138
Joined: Sat Mar 01, 2014 6:44 pm

Re: Post pics of your DIY setup!

Post by snevlida14 » Sun Mar 22, 2020 8:17 pm

wtk wrote:
Fri Mar 06, 2020 6:23 am
040B wrote:
Fri Mar 06, 2020 4:10 am

What kind of psu are you using? Are you running all modules on 5v?
as i wrote, seismic ips2.. http://seismic.industries/ips2/
Image
nice little psu, although the layout could be better for in-case mounting. Maybe i will make some similar later with different layout.
with these modules i measured current around 1,7A from the usb, so it can run quite long time with this 20ah bank.
That standoff idea is baller

User avatar
diablojoy
Super Deluxe Wiggler
Posts: 1617
Joined: Fri Jan 22, 2010 9:03 pm
Location: melbourne

Re: Post pics of your DIY setup!

Post by diablojoy » Thu Apr 09, 2020 3:29 am

Sick of my cheap plastic parts drawers so made this one from salvaged timber
fronts are blackwood taken from an old stump started it last august
Will use this one for resistors - 100 draws with 4 partitioned sections per draw

20200406_135026.jpg

hmm sorry its upside down :despair:
You do not have the required permissions to view the files attached to this post.
It probably wont happen today but if it does it definitely wont go smoothly.

User avatar
Flareless
Super Deluxe Wiggler
Posts: 1345
Joined: Wed Sep 30, 2015 6:33 am
Location: Ontario, Canada
Contact:

Re: Post pics of your DIY setup!

Post by Flareless » Thu Apr 09, 2020 3:38 am

diablojoy wrote:
Thu Apr 09, 2020 3:29 am
Sick of my cheap plastic parts drawers so made this one from salvaged timber ...
A Thing of Beauty! :yay: :yay: :yay:
Rich

Image

What can this strange device be? When I touch it, it gives forth a sound - Neil Peart

User avatar
NeolithicElectrophones
Common Wiggler
Posts: 217
Joined: Fri Jul 28, 2017 12:38 am
Location: California

Re: Post pics of your DIY setup!

Post by NeolithicElectrophones » Thu Apr 09, 2020 3:48 am

diablojoy wrote:
Thu Apr 09, 2020 3:29 am
Sick of my cheap plastic parts drawers so made this one from salvaged timber
fronts are blackwood taken from an old stump started it last august
Will use this one for resistors - 100 draws with 4 partitioned sections per draw
Holy s#%!
That is seriously skilled work. Looks incredibly good. The blackwood fronts look expertly prepared and finished, great symmetry etc...
Reminds me of older medicinal cabinets, functional at heart but with wonderful aesthetic considerations.

User avatar
bitflip
Ultra Wiggler
Posts: 912
Joined: Sun Dec 14, 2014 10:19 pm
Location: in the series of tubes

Re: Post pics of your DIY setup!

Post by bitflip » Sat Apr 11, 2020 10:54 pm

diablojoy wrote:
Thu Apr 09, 2020 3:29 am
Sick of my cheap plastic parts drawers so made this one from salvaged timber
:yay:

:hail:
Beautiful work there! Nostalgic reminder of card catalogs like used to be in public libraries before the 90s :youkids:

User avatar
romain
Learning to Wiggle
Posts: 21
Joined: Tue Aug 22, 2017 12:30 am

Re: Post pics of your DIY setup!

Post by romain » Sat May 09, 2020 6:00 am

Hello !
Here is my work since this january (the quarantine helped a lot !)
As you can see, I made some improvements on panels creations (yellow ones are my first tries)
And I know, I have to fill that case, didn't plan to make that big... :hihi:

Image

Image

Image

User avatar
Troubleshooter
Wiggling with Experience
Posts: 365
Joined: Thu Oct 01, 2015 8:21 am
Location: Belgium

Re: Post pics of your DIY setup!

Post by Troubleshooter » Sun May 24, 2020 5:35 pm

20200524_233822 (2).jpg
20200524_233746 (2).jpg
My mostly Yusynth system. Back to the woodwork for another "floor" for that fixed filterbank.
You do not have the required permissions to view the files attached to this post.

User avatar
tobb
Super Deluxe Wiggler
Posts: 1041
Joined: Sat Nov 26, 2011 5:41 am

Re: Post pics of your DIY setup!

Post by tobb » Fri Jun 12, 2020 7:26 am

diablojoy wrote:
Thu Apr 09, 2020 3:29 am
Sick of my cheap plastic parts drawers so made this one from salvaged timber
fronts are blackwood taken from an old stump started it last august
Will use this one for resistors - 100 draws with 4 partitioned sections per draw


20200406_135026.jpg


hmm sorry its upside down :despair:
:hail:

Post Reply

Return to “Music Tech DIY”