DIY learning resources

[ketem13]

A follow-up to my last post; here I talk about op amps, Norton amps, OTAs, and 2164-style current-in, current-out VCAs.

Thanks for your videos!

Throwing this inkscape file (basic components and punch holes) out there in the hopes that someone finds it useful--so feel free to critique, build upon, or post your own. This has been for personal use so.

As far a debugging sdiy, see craque's post on page 1! Especially numbers 3 and 4. And Here's Ray Wilson's page on debugging.

Exactly what I was looking for! thanks!

[abovenyquist]

Tonight's lesson is on scaling & shifting waveforms with op amps.

[therumdiaries]

Just built a Jak Plugg Mutable Instruments uGrids (Pusherman) from scratch as my first build more or less. Took me a while to figure out all the steps and hardware necessary to program it so I've written them down here if they're any help to anyone in a similar position:
uGridsProgrammingGuide

Fuse settings are a bit blurry in the pdf... L value is 0xff, H value is 0xd8, E value is 0x05 and LB is 0x2f.

[samclerk9087]

Welcome, I'm new too these new resource that you share are good and helpful .