"Continuum" Eurorack VC Phaser

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: Joe., lisa, luketeaford, Kent

User avatar
ossi_fx
Learning to Wiggle
Posts: 35
Joined: Tue Oct 25, 2011 2:06 pm
Location: Turku, Finland

Post by ossi_fx » Fri Jul 27, 2012 6:48 am

Huh,

Continuum, Waverider and HMVCO1, i want them all. My soldering station is warming up already... :hyper:

User avatar
KNYST
hiding in the forest
Posts: 2915
Joined: Mon Jan 26, 2009 10:09 am
Location: the Taiga, Sweden

Post by KNYST » Sat Jul 28, 2012 4:50 am

Lovely sounds. Definitely up for at least one! :sb:
frequencycentral wrote:My panel is 10HP. I think it might just be able to squeeze into an 8...but 10 for comfort.
I'd like to see an 8hp panel version of both this and the LM13700 filter. Looks like none of them would be too cramped...
(One could always cut 1hp on each side I suppose :mrgreen: )
NOISE HEALS.
patch responsibly.
LISTEN | WATCH

Naturebot
Learning to Wiggle
Posts: 11
Joined: Fri Oct 21, 2011 7:27 pm

Post by Naturebot » Sat Jul 28, 2012 10:45 pm

GIVE. WANT. :sadbanana:

Dogue
Common Wiggler
Posts: 218
Joined: Fri May 04, 2012 9:36 pm

Post by Dogue » Thu Aug 02, 2012 8:11 pm

KNYST wrote:Lovely sounds. Definitely up for at least one! :sb:
frequencycentral wrote:My panel is 10HP. I think it might just be able to squeeze into an 8...but 10 for comfort.
I'd like to see an 8hp panel version of both this and the LM13700 filter. Looks like none of them would be too cramped...
(One could always cut 1hp on each side I suppose :mrgreen: )
I'd also be in favor of an 8hp version of this -- doesn't seem like it would be too cramped.

User avatar
nickster
Ultra Wiggler
Posts: 832
Joined: Thu Feb 11, 2010 12:48 pm
Location: Stockhom, SWEDEN

Post by nickster » Fri Aug 03, 2012 6:42 am

I like this heaps! Will be insterested in a panel and PCB when you get back from your holidays.

User avatar
rasseru
Underwater Wiggler
Posts: 889
Joined: Tue Jun 22, 2010 2:16 pm
Location: london

Post by rasseru » Tue Aug 07, 2012 11:40 am

How much for a completed or full kit? (will you provide full kits?)

User avatar
delayed
Veteran Wiggler
Posts: 544
Joined: Wed Oct 07, 2009 10:14 pm
Location: Nashville TN

Post by delayed » Wed Aug 15, 2012 7:17 pm

nice looking pcb.

User avatar
arrmcbain
Common Wiggler
Posts: 218
Joined: Sat Oct 02, 2010 7:02 am
Location: Adelaide, Australia

Post by arrmcbain » Sat Aug 18, 2012 7:08 am

Watching this thread with interest.. my system is crying out for a nice phaser. Looking forward to a PCB, and any info about changes for 15V would be great.

User avatar
corex
scare the dog!
Posts: 736
Joined: Tue Jan 25, 2011 1:16 am
Location: oregon

Post by corex » Sat Aug 18, 2012 12:34 pm

Sounds really nice! How deep is it?

User avatar
frequencycentral
Kicking the shit out of your speakers
Posts: 1184
Joined: Thu Dec 31, 2009 10:49 am
Location: Rick, FC>UK
Contact:

Post by frequencycentral » Sat Aug 18, 2012 12:52 pm

corex wrote:Sounds really nice! How deep is it?
The phasing? Very. :hihi:

The PCB? 60mm.

User avatar
corex
scare the dog!
Posts: 736
Joined: Tue Jan 25, 2011 1:16 am
Location: oregon

Post by corex » Sat Aug 18, 2012 5:12 pm

frequencycentral wrote:
corex wrote:Sounds really nice! How deep is it?
The phasing? Very. :hihi:

The PCB? 60mm.
Great! I think I'll want a PCB and a panel when they're available.

User avatar
visible cow
Super Deluxe Wiggler
Posts: 1441
Joined: Fri Dec 18, 2009 10:49 pm
Location: Athens, GA

Post by visible cow » Fri Aug 31, 2012 6:18 am

Definitely interested in a pre-built module.

User avatar
astroschnautzer
Super Deluxe Wiggler
Posts: 1613
Joined: Wed Nov 19, 2008 5:58 am
Location: Finland

Post by astroschnautzer » Fri Aug 31, 2012 7:54 am

Id like some pcb's and panels too...

User avatar
JJ
Veteran Wiggler
Posts: 631
Joined: Sat May 08, 2010 10:46 am
Location: Turku, Finland, EU

Post by JJ » Sat Sep 01, 2012 11:08 am

Pcb+ panel yes.

User avatar
regenbot
Super Deluxe Wiggler
Posts: 1177
Joined: Sat Aug 21, 2010 5:59 am
Location: Finland

Post by regenbot » Sat Sep 01, 2012 11:19 am

I'd like a pcb & panel too :tu:

User avatar
wavehead
Super Deluxe Wiggler
Posts: 1235
Joined: Sat Nov 14, 2009 7:58 pm

Post by wavehead » Sat Sep 01, 2012 2:03 pm

want pcb + panel, possibly two of each. so stoked for this one!

User avatar
abendrot
Veteran Wiggler
Posts: 703
Joined: Sun Dec 21, 2008 5:18 am
Location: austria

Post by abendrot » Sat Sep 01, 2012 6:12 pm

wowza :hyper: this one sounds and looks really nice!
i'd take a pcb+panel in a heartbeat!

User avatar
visible cow
Super Deluxe Wiggler
Posts: 1441
Joined: Fri Dec 18, 2009 10:49 pm
Location: Athens, GA

Post by visible cow » Sat Sep 08, 2012 1:14 pm

Previously said I wanted a pre-built module....but starting to think this could be a good diy project for a beginner. How much for a pcb/panel?

User avatar
frequencycentral
Kicking the shit out of your speakers
Posts: 1184
Joined: Thu Dec 31, 2009 10:49 am
Location: Rick, FC>UK
Contact:

Post by frequencycentral » Sat Sep 08, 2012 1:50 pm

visible cow wrote:Previously said I wanted a pre-built module....but starting to think this could be a good diy project for a beginner. How much for a pcb/panel?
It will be £15 GBP per PCB and £15 GBP per 10HP panel. I've just gotta write the build docs then this project is ready to go......I've had a busy week, just had a new workshop built in the grounds of Frequency Central Castle, so I've been busy decking it out and getting power laid on - normal service will be resumed next week.

Gripp
Wiggling with Experience
Posts: 278
Joined: Sun Nov 21, 2010 3:07 pm
Location: Luleå, Sweden

Post by Gripp » Sun Sep 09, 2012 3:05 am

Can't really have too many phasers in my book and this one sounded stunning!
Pun not intended, really, trust me.

I'm def interested in a PCB+Panel :tu:

User avatar
ChrisR
Wiggling with Experience
Posts: 479
Joined: Thu Jan 06, 2011 9:02 am
Location: Idiot zone, formerly known as "Earth"

Post by ChrisR » Tue Sep 11, 2012 7:25 pm

I like the sound! Well, i'm a phaser addict... :hihi:

I suppose one could buffer the output of the fifth stage to get two outputs 90 degrees apart?

And what are the dimensions of the board?

:tu:
Buy the ticket - take the ride.

User avatar
ABC
Common Wiggler
Posts: 145
Joined: Fri Jun 29, 2012 7:35 pm
Location: The Street, Metaverse

Post by ABC » Thu Sep 13, 2012 6:18 pm

seriously want to have a whack at building this. Any news on DIY PCBs?
bewilderbeast.bandcamp.com

User avatar
mOBiTh
Super Deluxe Wiggler
Posts: 1984
Joined: Sun May 20, 2012 2:20 pm

Post by mOBiTh » Thu Sep 13, 2012 7:25 pm

i'd like a couple of pcbs too please :)

User avatar
nd595
Common Wiggler
Posts: 148
Joined: Thu Sep 13, 2012 11:03 am
Location: Spain

Post by nd595 » Sat Sep 22, 2012 5:38 am

PCB and panel please!!!

User avatar
JJ
Veteran Wiggler
Posts: 631
Joined: Sat May 08, 2010 10:46 am
Location: Turku, Finland, EU

Post by JJ » Sun Sep 23, 2012 2:29 pm

Do you think this can be ordered at the same time with the waverider? :love:

Post Reply

Return to “Music Tech DIY”