2600 clone - Two Thousand Six Hundred (TTSH)

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: Kent, Joe., luketeaford, lisa

Post Reply
User avatar
zthee
Panelhöna
Posts: 1642
Joined: Tue Mar 03, 2009 3:39 am
Location: Stockholm, Sweden

2600 clone - Two Thousand Six Hundred (TTSH)

Post by zthee » Sun Apr 21, 2013 3:56 am

See the website - www.thehumancomparator.net for more information!

OK, so haven't edited this post since June or so.

Here's the latest pic of the build (It's a real unit, not a render!)

Image

Second prototype has been finished.

Image

First sounds of 2nd -

http://soundcloud.com/info-1822/ttsh-pr ... -2-current

Sounds from 1st proto -

http://soundcloud.com/info-1822/ttsh-2

http://soundcloud.com/info-1822/ttsh

It all started in this thread - viewtopic.php?t=76845 with this post - viewtopic.php?p=1111392#1111392

So this post is a continuation of that, repeating stuff already written, so you'll have a chance to catch up!

And as stated in that thread the plan is to make a DIY 2600 clone. Called Two Thousand Six Hundred (Or TTSH for short). I will offer a panel and a PCB. The other components will probably be sold by a fellow Wiggler. But we still have to figure that all out. The only thing left is to find someone that can make a box for it. I have the drawings for the box already done, but we'll figure that out once we get there.

The original 2600 is a beast, and as some people has jokingly said before it should be 86% of the size. And I agree. Hence I've made it smaller. Though not really 86%, more closely to 73% or something. It measures 60 cm x 30 cm now (About the size of a original Korg MS-20 funny enough).

Image
Big PCB - http://thehumancomparator.net/arp2600/2600-board.png

Everything is prewired and PCB mounted on the board. Slides and jacks. So there is minimal wiring to be done. (CV, gate + trig and speakers.).

All modules have their own power connection, so you can test build them one and one, with out worrying about toasting something in one corner just because you pop in a chip the wrong way in the other corner. PSU hasn't been decided yet. But looking after a good and reliable DC-DC converter, which is capable of providing a few amps for not so many dollars.

The sliders are Bourns PTA and they have a LED on them. If you don't like it, you can get caps for them. You can select the brightness of the LEDs with a trim pot on the front panel.

Modules chosen are 4027-1 and the original 4012 (lawsuit).

The oscillators are still mounted on the small pesky sub modules. The rest of the sub modules have been moved down to the big board. To simplify the building process. The amp for the speakers have been changed though, to a TD2030 based circuit. But since it isn't a critical part of the design, I felt that I could poke my dirt little fingers in it.

There will be no changes to anything else. No extra this or remove this. It stays as it is. Doesn't matter if it would be the best synth in the world with an extra ADSR. It's not happening.

The estimation is to have something ready by September. But nothing is written in stone. There's still a lot of question marks...

I will receive the prototype PCB this Wednesday (24th of April) and will test it then and report back.

There is also an interest list over at my website - www.thehumancomparator.net - You can sign up and I will send out info once this project is done. I will also post here as well, but if you don't want to miss it. Also great for me so I can estimate how big this will be.

Update 130425

Proto PCB is in -

Image
Last edited by zthee on Thu Oct 24, 2013 3:55 am, edited 4 times in total.
No PM's please! Send an e-mail - ttsh(a)thehumancomparator.net

Information regarding the Two Thousand Six Hundred DIY project - > http://www.thehumancomparator.net

_

"Oh Batman, why you got to be so heteronormative?".

User avatar
Luka
Super Deluxe Wiggler
Posts: 5380
Joined: Tue Jul 15, 2008 9:15 am
Location: melbourne

Post by Luka » Sun Apr 21, 2013 3:58 am

very exciting

keep us posted on your progress zthee

User avatar
Thonk Support
aka Monobass
Posts: 8818
Joined: Fri May 29, 2009 5:39 pm
Location: Brighton, UK

Post by Thonk Support » Sun Apr 21, 2013 4:01 am

:yay:
Thonk - CLICK HERE - Modular Synth DIY + Eurorack Accessories Store

AS of October 2020 this account which used to go by the name of Monobass is now manned by various staff at Thonk.

User avatar
tIB
Stainer!
Posts: 9334
Joined: Mon Jun 08, 2009 5:28 am
Location: UK

Post by tIB » Sun Apr 21, 2013 4:03 am

:party: :party: :party: :party: :party: :party: :party:

Amazing!

User avatar
andrewF
Super Deluxe Wiggler
Posts: 4046
Joined: Wed Apr 15, 2009 7:36 pm
Location: WA
Contact:

Post by andrewF » Sun Apr 21, 2013 4:14 am

:hail:

:love:

:omg: fuck!

User avatar
negativspace
Manhattan Analog
Posts: 6576
Joined: Tue Apr 13, 2010 2:50 am
Location: Manhattan, KS, USA
Contact:

Post by negativspace » Sun Apr 21, 2013 4:24 am

I've been in on this by way of a certain Swedish wiggler... glad to see it coming into the light. I continue to be as excited about it as I was when I first found out. :hyper:

Beautiful job, zthee!

User avatar
astroschnautzer
Super Deluxe Wiggler
Posts: 1613
Joined: Wed Nov 19, 2008 5:58 am
Location: Finland

Post by astroschnautzer » Sun Apr 21, 2013 4:50 am

WOW :omg:

User avatar
Cheradenine
Modulate me harder
Posts: 664
Joined: Sun May 23, 2010 12:51 pm
Location: Between Léman and Jura

Post by Cheradenine » Sun Apr 21, 2013 4:54 am

:omg: :sb:

User avatar
mDang
Wiggling with Experience
Posts: 257
Joined: Fri Apr 13, 2012 3:11 am
Location: France
Contact:

Post by mDang » Sun Apr 21, 2013 5:22 am

yeahhh ! :yay:
Analogeeks

Arnob
Learning to Wiggle
Posts: 3
Joined: Sun Nov 27, 2011 1:19 pm

Post by Arnob » Sun Apr 21, 2013 5:34 am

oi oi can't wait to hear the first results!

User avatar
dude
fuck yeah!
Posts: 9990
Joined: Sun Jul 05, 2009 2:08 pm
Location: northeastohio

Post by dude » Sun Apr 21, 2013 5:48 am

damn. i need to clean up a lil after reading this.

User avatar
stimresp
Common Wiggler
Posts: 161
Joined: Thu Mar 14, 2013 8:51 am

Post by stimresp » Sun Apr 21, 2013 5:55 am

Very ambitious!
I'm definitely interested.

User avatar
Jefz
Common Wiggler
Posts: 159
Joined: Sat Apr 20, 2013 1:33 pm
Location: The Netherlands

Post by Jefz » Sun Apr 21, 2013 5:56 am

Nice! :yay:

User avatar
nickster
Ultra Wiggler
Posts: 832
Joined: Thu Feb 11, 2010 12:48 pm
Location: Stockhom, SWEDEN

Post by nickster » Sun Apr 21, 2013 6:16 am

Best of luck with this. Still very excited that you have decided to do this. (been checking the other thread daily) A very big thank you beforehand. :nana: :nana: thanks for the update regarding panel size. I am aiming to build my own case and have 2 designs in mind so this helps heaps. Also nice to have a post over here in DIY land just in case some fellow wigglers were missing out.

User avatar
mOBiTh
Super Deluxe Wiggler
Posts: 1994
Joined: Sun May 20, 2012 2:20 pm

Post by mOBiTh » Sun Apr 21, 2013 6:37 am

oh fuck

User avatar
Reality Checkpoint
Confused By Electricity
Posts: 3922
Joined: Wed Apr 15, 2009 4:06 am
Location: Al Aqsa

Post by Reality Checkpoint » Sun Apr 21, 2013 6:42 am

Crikey Moses!

User avatar
haima
Veteran Wiggler
Posts: 750
Joined: Sat Dec 25, 2010 6:33 pm
Location: Melbourne, Australia

Post by haima » Sun Apr 21, 2013 7:03 am

:sb:

User avatar
dougt
Super Deluxe Wiggler
Posts: 1133
Joined: Thu Apr 30, 2009 3:47 am
Location: Sillycon Valley, CA

Post by dougt » Sun Apr 21, 2013 7:22 am

Sounds cool but one of the things that makes the 2600 so much fun to use is the ergonomics. It would feel kinda cramped I think trying to use one that's MS20 sized...

User avatar
southphillysynths
Super Deluxe Wiggler
Posts: 2506
Joined: Tue Jan 29, 2013 11:12 am
Location: Philadelphia PA

Post by southphillysynths » Sun Apr 21, 2013 7:30 am

When you say pre-built, how much will already be done? Will we get a pcb and a bag of parts, or a pcb with resistors caps everything else already on it? Will the values of parts be printed on the board? :despair:
Dcramer wrote:"Not all who wiggle are lost" :boat:
WHO IS BOZO TEXINO?!?!

User avatar
mOBiTh
Super Deluxe Wiggler
Posts: 1994
Joined: Sun May 20, 2012 2:20 pm

Post by mOBiTh » Sun Apr 21, 2013 7:46 am

oh fucking hell this has properly made my day :goo:

some sort of matching touch keyboard would be pretty special too I reckon

super super cool project 8_)

User avatar
elmegil
Super Deluxe Wiggler
Posts: 2978
Joined: Sun Apr 29, 2012 2:57 pm
Location: Chicago

Post by elmegil » Sun Apr 21, 2013 8:25 am

73% gives me an *idea* but what are the actual dimensions?

What is your expected price for panel + PCB?

It's an awesome project! :hail:

User avatar
astroschnautzer
Super Deluxe Wiggler
Posts: 1613
Joined: Wed Nov 19, 2008 5:58 am
Location: Finland

Post by astroschnautzer » Sun Apr 21, 2013 8:26 am

Btw, any even rough cost estimate for this project?

User avatar
alphabetter
Common Wiggler
Posts: 87
Joined: Mon Dec 06, 2010 7:24 am

Post by alphabetter » Sun Apr 21, 2013 9:00 am

Never seen a 2600 in the flesh, but it is a fascinating beast. I look forward to more news.
lushprojects.com - a feast of electronics fun

User avatar
Rex Coil 7
Super Deluxe Wiggler
Posts: 7089
Joined: Thu Nov 29, 2012 11:29 am
Location: Captain Of Outer Space

Post by Rex Coil 7 » Sun Apr 21, 2013 9:01 am

Gee zthee .... just look at all the new exposure! I'd say this was a good idea, wouldn't you?
5U MODULAR NORMALIZING PROJECT (for your entertainment) viewtopic.php?t=78836&highlight=
... I'm dyin' in a vat in the garage ...

User avatar
Popski
The Cake is a Pie
Posts: 1945
Joined: Wed Jul 16, 2008 12:37 am
Location: Shame Tunnel

Post by Popski » Sun Apr 21, 2013 9:07 am

:yay: :yay: :yay: :bacon: :bacon: :bacon: :deadbanana:

Post Reply

Return to “Music Tech DIY”