DIY Trade Thread [ Parts, PCBs, Panels ]

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: Kent, luketeaford, Joe.

Post Reply
User avatar
B0bcat
Wiggling with Experience
Posts: 461
Joined: Sun Jun 10, 2018 9:07 pm

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by B0bcat » Thu Jan 28, 2021 2:35 pm

jersupereq wrote:
Thu Jan 28, 2021 2:31 pm
B0bcat wrote:
Tue Jan 12, 2021 3:58 pm
Thank you, ordered. RS build doc recommend pots from thonk or tadya, going to give tadya a try this time, hopefully they fit without panel modification.

Still looking for 2x THAT2180A
Last 2 available: https://www.newark.com/that-corporation ... dp/50M5189
Those things are pretty much sold out everywhere
Thanks, I ordered them a month ago when they also showed two in stock, and then I got an estimated shipment update for mid March. I think their stock status is not represented truthfully, or in the best way they could
WTB: MacBeth X-Series Single VCO / Dual Oscillator / Elements

User avatar
synth.void
Common Wiggler
Posts: 222
Joined: Mon Jan 27, 2020 6:50 pm

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by synth.void » Sat Jan 30, 2021 7:17 am

Lookin for the monsoon LEDs (common cathode r/g, like https://www.mouser.de/ProductDetail/Kin ... WP115VEGW/). Anyone in EU/Berlin?

User avatar
cackland
Super Deluxe Wiggler
Posts: 2345
Joined: Thu Dec 28, 2017 5:42 pm
Location: Los Angeles, California

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by cackland » Sat Jan 30, 2021 5:16 pm

B0bcat wrote:
Thu Jan 28, 2021 2:35 pm
jersupereq wrote:
Thu Jan 28, 2021 2:31 pm
B0bcat wrote:
Tue Jan 12, 2021 3:58 pm
Thank you, ordered. RS build doc recommend pots from thonk or tadya, going to give tadya a try this time, hopefully they fit without panel modification.

Still looking for 2x THAT2180A
Last 2 available: https://www.newark.com/that-corporation ... dp/50M5189
Those things are pretty much sold out everywhere
Thanks, I ordered them a month ago when they also showed two in stock, and then I got an estimated shipment update for mid March. I think their stock status is not represented truthfully, or in the best way they could
Where did you order from? Direct from THAT?

User avatar
B0bcat
Wiggling with Experience
Posts: 461
Joined: Sun Jun 10, 2018 9:07 pm

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by B0bcat » Sat Jan 30, 2021 5:25 pm

cackland wrote:
Sat Jan 30, 2021 5:16 pm
B0bcat wrote:
Thu Jan 28, 2021 2:35 pm
jersupereq wrote:
Thu Jan 28, 2021 2:31 pm
B0bcat wrote:
Tue Jan 12, 2021 3:58 pm
Thank you, ordered. RS build doc recommend pots from thonk or tadya, going to give tadya a try this time, hopefully they fit without panel modification.

Still looking for 2x THAT2180A
Last 2 available: https://www.newark.com/that-corporation ... dp/50M5189
Those things are pretty much sold out everywhere
Thanks, I ordered them a month ago when they also showed two in stock, and then I got an estimated shipment update for mid March. I think their stock status is not represented truthfully, or in the best way they could
Where did you order from? Direct from THAT?
I tried ordering from Newark
WTB: MacBeth X-Series Single VCO / Dual Oscillator / Elements

User avatar
cackland
Super Deluxe Wiggler
Posts: 2345
Joined: Thu Dec 28, 2017 5:42 pm
Location: Los Angeles, California

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by cackland » Sat Jan 30, 2021 11:35 pm

I would always go direct

User avatar
synth.void
Common Wiggler
Posts: 222
Joined: Mon Jan 27, 2020 6:50 pm

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by synth.void » Mon Feb 01, 2021 3:38 pm

synth.void wrote:
Sat Jan 30, 2021 7:17 am
Lookin for the monsoon LEDs (common cathode r/g, like https://www.mouser.de/ProductDetail/Kin ... WP115VEGW/). Anyone in EU/Berlin?
Well, I've ordered the much needed LEDs and some extra. Now I need the square flat bipolar leds for the sliders, does anyone have 4 of them? The part is most likely some variation of Bivar 749-R3BC, but Lumex and Kingbright might have them also.

User avatar
m12386
Common Wiggler
Posts: 59
Joined: Wed Apr 08, 2020 10:44 pm
Location: Chicago

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by m12386 » Fri Feb 05, 2021 10:11 pm

I need a STM32F103CB chip. Mouser and Digikey are OOS.

jonnyjupiter
Common Wiggler
Posts: 103
Joined: Tue Aug 11, 2020 3:41 am

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by jonnyjupiter » Mon Feb 08, 2021 5:47 am

m12386 wrote:
Fri Feb 05, 2021 10:11 pm
I need a STM32F103CB chip. Mouser and Digikey are OOS.
I've been waiting for these for two months.
They seem to be out of stock across the world.
Does anyone know when they're due in?

pjbulls
Common Wiggler
Posts: 173
Joined: Tue Feb 04, 2020 5:26 pm
Contact:

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by pjbulls » Mon Feb 08, 2021 6:16 am

Yeah, expected around the time COVID-19 is resolved and the global economy picks up again...

(serious answer: have a look at this thread)

rafyc
Common Wiggler
Posts: 171
Joined: Fri Feb 14, 2020 12:01 pm
Location: Paris

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by rafyc » Mon Feb 08, 2021 6:55 am

Bamboombaps wrote:
Tue Dec 08, 2020 8:52 am
Some blanks I have posted here before and some new ones
Looking for PCB panel sets
IMG_20201208_134636.jpg
hi, would like to trade ?
what are you looking for ?

rafyc
Common Wiggler
Posts: 171
Joined: Fri Feb 14, 2020 12:01 pm
Location: Paris

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by rafyc » Mon Feb 08, 2021 6:59 am

Looking for
x2 SSI2164 SMD
x1 bournes fader
I will put the list this evening of component i had to trade.
Chip, pot, switches...

Thanks

jonnyjupiter
Common Wiggler
Posts: 103
Joined: Tue Aug 11, 2020 3:41 am

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by jonnyjupiter » Mon Feb 08, 2021 10:53 am

Stop the press!
STM32F103CBT6 back in stock at Farnell.
Just ordered some.

User avatar
synth.void
Common Wiggler
Posts: 222
Joined: Mon Jan 27, 2020 6:50 pm

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by synth.void » Mon Feb 08, 2021 3:54 pm

jonnyjupiter wrote:
Mon Feb 08, 2021 10:53 am
Stop the press!
STM32F103CBT6 back in stock at Farnell.
Just ordered some.
:party:

Now I'm looking for 2x, or even 4x AD5687RBRUZ. That's the internal Vref ADC for teletype - I've mistakenly purchased a bunch of AD5687BRUZ.

Also, looking for black panels for the TM pulses expander and varigate 4+. Anyone?

bigsecret
Learning to Wiggle
Posts: 16
Joined: Mon Oct 10, 2016 4:35 am
Location: Chatham, UK

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by bigsecret » Tue Feb 09, 2021 6:26 am

I recently completed the TSynth_Teensy 4.1 and had the side cheeks and side panel column parts 3D printed. I was able to have extra parts printed at no additional cost so I have the following parts left over

End Cheek (in black) - 4 off
Side Panel Column - 90 off

jonnyjupiter
Common Wiggler
Posts: 103
Joined: Tue Aug 11, 2020 3:41 am

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by jonnyjupiter » Tue Feb 09, 2021 11:01 am

False alarm with Farnell.
I ordered 10 chips when they said they had 248 in stock but received an email today saying they were out of stock and expecting a delivery 24th April.
Great.

User avatar
Reality Checkpoint
Confused By Electricity
Posts: 3923
Joined: Wed Apr 15, 2009 4:06 am
Location: Al Aqsa

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by Reality Checkpoint » Tue Feb 09, 2021 11:37 am

B0bcat wrote:
Mon Jan 11, 2021 7:27 pm


2x THAT 2180 A

Hit me up!
I have been through my stash and have found the following that I will never use:

1 x THAT 2180 A,

20 x THAT 2180 B

2 x THAT 2181 LA

2 x THAT 2181 LB

I searched for ages to see if I had another A version to no avail. :hmm:

I think the THD is a nominally higher on the B versions, but not sure of other differences.

Let me know if you would like them.
Last edited by Reality Checkpoint on Wed Feb 10, 2021 8:59 am, edited 1 time in total.

japes
Learning to Wiggle
Posts: 33
Joined: Wed Jul 18, 2018 7:54 pm

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by japes » Tue Feb 09, 2021 11:50 am

Anyone have a black monsoon panel they'd trade for my white one? It's the Magpie panel.

User avatar
B0bcat
Wiggling with Experience
Posts: 461
Joined: Sun Jun 10, 2018 9:07 pm

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by B0bcat » Wed Feb 10, 2021 2:06 pm

B0bcat wrote:
Mon Jan 11, 2021 7:27 pm
Looking to buy the following (I'm in SoCal) -

2x Alpha potentiometer (Thonk style - other Alpha clones unfortunately do not fit the panel hole) B250K - Round shaft 6.35mm - Alpha Vertical 9mm Potentiometer - MPN: RD901F-40-15R1-B250K

2x THAT 2180 A

Hit me up!
Now found, thank you!
WTB: MacBeth X-Series Single VCO / Dual Oscillator / Elements

User avatar
forrest
Common Wiggler
Posts: 126
Joined: Fri Apr 05, 2019 9:33 pm
Location: Asheville
Contact:

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by forrest » Fri Feb 12, 2021 7:54 am

I have for trade:

Quadtec 101 dual OSC, Panel+PCB
Norns Shield, PCB
Kinks, Panel+PCB
Pique (4hp peaks), Panel+PCB
4hp Wasp Filter by forestcaver, Panel+PCB
Intellijel 1u Ornament & Crime w/ VOR (better voltage ranges), Panel + PCBs
Benjolin, Aluminum Panel Black from CCTV
NLC Phase/Flange 329, Panel+PCB - Traded
NLC Choral Generator, Panel+PCB - Traded
Terminal Tedium, Panel+PCB
Little Traverse Bay (2x screen expander for Terminal Tedium), Panel+PCB

I'm Interested in/looking for:

Eurorack PCB/Panel sets for almost anything, let me know what you have to offer, would love to find some RYO pcb/panel sets, also interested in any black panels, BKM, Oscillosaurus..

IMG_4009.jpeg

User avatar
Bamboombaps
Wiggling with Experience
Posts: 417
Joined: Wed Sep 16, 2015 7:14 am
Location: Glasgow

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by Bamboombaps » Tue Feb 16, 2021 1:02 pm

Here's my latest list
A load of new blank designs
Erica oscillator
Erica envelope
Erica swamp
Erica bbd
Long Moraydular busboards
BMC panels , decaying analogue noise and FM drum
Sparkfun proto pedal
Synthsizer ruler
Oh and also a goofed up panel for the cutlasses glitch delay project which needs mounting holes drilled and is ever so slightly misaligned but useable if you don't have anything else

Interested in euro PCB panels sets or send your list ☺️👍
IMG_20210216_145109.jpg
IMG_20210216_145414.jpg
IMG_20210216_153934.jpg
IMG_20210216_153915.jpg
IMG_20210216_144953.jpg
IMG_20210216_143247.jpg
IMG_20210216_144607.jpg
16134984505866329925152421602517.jpg

ub1k
Learning to Wiggle
Posts: 47
Joined: Fri Dec 14, 2018 2:49 pm
Location: Switzerland

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by ub1k » Tue Feb 16, 2021 1:21 pm

Has anyone got a 47mH inductor for sale? This one in particular: https://octopart.com/search?q=RLB0812-473KL (for the CB-55 drum machine)

User avatar
synth.void
Common Wiggler
Posts: 222
Joined: Mon Jan 27, 2020 6:50 pm

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by synth.void » Tue Feb 16, 2021 5:38 pm

Looking for a CS4270 cirrus codec chip for monome Norns.

User avatar
e-grad
Super Deluxe Wiggler
Posts: 3383
Joined: Tue Oct 07, 2008 5:55 am
Location: Berlin

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by e-grad » Sun Feb 21, 2021 5:18 am

I am looking for 7 mounting screws (for the modules) for a .COM mounting frame. Actually I am not sure what frame I have :hmm:

Since I built quite a lot Blacet kits but have used my own IC sockets I have a load of Blacet's IC sockets spare.
I have a couple of A100 knobs.
Last edited by e-grad on Sun Feb 21, 2021 10:23 am, edited 4 times in total.

User avatar
Altitude909
Super Deluxe Wiggler
Posts: 3612
Joined: Wed Aug 24, 2011 5:13 pm
Location: Meesheegan

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by Altitude909 » Sun Feb 21, 2021 8:41 am

I have a original hardwood sides Jasper case (from the very first run), never ended up getting used. The sides are finished. Up for trades (its worth ~$100)

Post Reply

Return to “Music Tech DIY”