DIY Trade Thread [ Parts, PCBs, Panels ]

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: Kent, luketeaford, Joe.

Post Reply
Texy
Learning to Wiggle
Posts: 32
Joined: Thu Mar 18, 2021 7:28 am
Location: Newbury, UK

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by Texy » Wed Mar 24, 2021 3:35 pm

Bamboombaps wrote:
Mon Mar 08, 2021 8:04 am

Extralife
Super Sixteen sequencer
I'm (very) new here - am I allow to trade, or do I need to have 100 posts or something?
I'd be interested in buying the super sixteen set, I have nothing to trade, just starting out....
Cheers
Texy

Boris_Yeltsin
Learning to Wiggle
Posts: 31
Joined: Tue Feb 19, 2019 9:02 am
Location: Central Ohio

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by Boris_Yeltsin » Thu Mar 25, 2021 11:52 am

If anyone has an extra dervish or uDervish pcb and panel I would be interested in taking them off your hands

User avatar
Luka
Super Deluxe Wiggler
Posts: 5404
Joined: Tue Jul 15, 2008 9:15 am
Location: melbourne

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by Luka » Sat Mar 27, 2021 3:26 am

Hunting that2252 x2 (or even 1)
Parts to trade

User avatar
Jaytee
Ultra Wiggler
Posts: 807
Joined: Mon Mar 11, 2013 5:12 pm

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by Jaytee » Sat Mar 27, 2021 11:38 am

Texy wrote:
Wed Mar 24, 2021 3:35 pm
Bamboombaps wrote:
Mon Mar 08, 2021 8:04 am

Extralife
Super Sixteen sequencer
I'm (very) new here - am I allow to trade, or do I need to have 100 posts or something?
I'd be interested in buying the super sixteen set, I have nothing to trade, just starting out....
Cheers
Texy
As I understand it, the buy/sell rules are relaxed slightly for this trade thread, but it does have to be actual trading. Any hints or implications re: buying/selling belong elsewhere and are subject to the 100 post rule.

Texy
Learning to Wiggle
Posts: 32
Joined: Thu Mar 18, 2021 7:28 am
Location: Newbury, UK

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by Texy » Sat Mar 27, 2021 11:47 am

Jaytee wrote:
Sat Mar 27, 2021 11:38 am
Texy wrote:
Wed Mar 24, 2021 3:35 pm
Bamboombaps wrote:
Mon Mar 08, 2021 8:04 am

Extralife
Super Sixteen sequencer
I'm (very) new here - am I allow to trade, or do I need to have 100 posts or something?
I'd be interested in buying the super sixteen set, I have nothing to trade, just starting out....
Cheers
Texy
As I understand it, the buy/sell rules are relaxed slightly for this trade thread, but it does have to be actual trading. Any hints or implications re: buying/selling belong elsewhere and are subject to the 100 post rule.
Thanks JayTee
I ended up buying it from Thonk in the end. Just researching the rest of the parts now.
Texy

Hales
Common Wiggler
Posts: 212
Joined: Mon Apr 30, 2018 11:22 am
Location: Strasbourg, France

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by Hales » Sat Mar 27, 2021 11:56 am

Looking for 1 Sub Mini DPDT ON ON Toggle Switch… anyone?

steviet
Wiggling with Experience
Posts: 435
Joined: Wed Oct 17, 2018 9:47 am
Location: Montréal
Contact:

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by steviet » Sat Mar 27, 2021 8:03 pm

Looking for 2 of the CS4270-CZZ Audio Codec for the Norns shield... they're just about impossible to find right now.
Soundcloud
Website - DIY/Euro/Gear Blog updated every Sunday

stefano
1-Post Wiggler
Posts: 1
Joined: Sun Mar 28, 2021 1:19 pm

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by stefano » Sun Mar 28, 2021 1:46 pm

Hi,

I have 2 "vintage" PCBs for trade.

Paul Maddox's GorF with preprogrammed CPU (not tested but it has never felt the plastic bag)
IMG_6187.jpg

PCB for the AvrX synth

IMG_6188.jpg



I have archives with files and instructions for both of them.

User avatar
synth.void
Common Wiggler
Posts: 231
Joined: Mon Jan 27, 2020 6:50 pm

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by synth.void » Thu Apr 01, 2021 5:19 pm

steviet wrote:
Sat Mar 27, 2021 8:03 pm
Looking for 2 of the CS4270-CZZ Audio Codec for the Norns shield... they're just about impossible to find right now.
I've just ordered one from AliExpress – the price defeats the purpose of DIYing the thing, but at this point I just want to get through with it.

steviet
Wiggling with Experience
Posts: 435
Joined: Wed Oct 17, 2018 9:47 am
Location: Montréal
Contact:

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by steviet » Thu Apr 01, 2021 5:24 pm

synth.void wrote:
Thu Apr 01, 2021 5:19 pm
steviet wrote:
Sat Mar 27, 2021 8:03 pm
Looking for 2 of the CS4270-CZZ Audio Codec for the Norns shield... they're just about impossible to find right now.
I've just ordered one from AliExpress – the price defeats the purpose of DIYing the thing, but at this point I just want to get through with it.
Great minds think-alike! Or impatient minds :hihi: I grabbed a couple off of Alibaba as well, here's to hoping they are genuine!

Also, be careful, I was offered a 20TTSOP package CS4270-CZZ on Alibaba. I double checked to make sure they send a 24TTSOP package chip.
Soundcloud
Website - DIY/Euro/Gear Blog updated every Sunday

User avatar
FetidEye
demonic space drone
Posts: 2165
Joined: Mon Dec 06, 2010 5:00 pm
Location: Red Zone
Contact:

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by FetidEye » Fri Apr 02, 2021 3:35 am

I got some stuff for trade:
Miasma (extended Rampage) PCB set (no panel)
Clouds pcb& alu black alu panel set
O&C pcb
4x Doepfer busboards v5
3x custom LZX Multiplier VCA board, populated & tested, no panel
2x 4ch Summing mixer (LZX design) populated & tested, no panel
Ming Mecca control core pcb set
bag of pj302 jacks. side angled without mount thread. accidently ordered these instead of pj302M

Interested in:
interesting pcb/panel sets
video DIY

User avatar
synth.void
Common Wiggler
Posts: 231
Joined: Mon Jan 27, 2020 6:50 pm

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by synth.void » Fri Apr 02, 2021 4:15 am

steviet wrote:
Thu Apr 01, 2021 5:24 pm
synth.void wrote:
Thu Apr 01, 2021 5:19 pm
steviet wrote:
Sat Mar 27, 2021 8:03 pm
Looking for 2 of the CS4270-CZZ Audio Codec for the Norns shield... they're just about impossible to find right now.
I've just ordered one from AliExpress – the price defeats the purpose of DIYing the thing, but at this point I just want to get through with it.
Great minds think-alike! Or impatient minds :hihi: I grabbed a couple off of Alibaba as well, here's to hoping they are genuine!

Also, be careful, I was offered a 20TTSOP package CS4270-CZZ on Alibaba. I double checked to make sure they send a 24TTSOP package chip.
Good catch, it's actually a 20TTSOP

ixtern
Wiggling with Experience
Posts: 261
Joined: Mon Jan 22, 2018 4:34 am

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by ixtern » Fri Apr 02, 2021 5:40 am

Hales wrote:
Sat Mar 27, 2021 11:56 am
Looking for 1 Sub Mini DPDT ON ON Toggle Switch… anyone?
Only source from which I am buying such switches is Thonk:
https://www.thonk.co.uk/shop/sub-mini-toggle-switches/

User avatar
elmegil
Super Deluxe Wiggler
Posts: 3035
Joined: Sun Apr 29, 2012 2:57 pm
Location: Chicago

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by elmegil » Fri Apr 02, 2021 10:35 am

I've bought subminis from Jameco as well, though it's been a while. Make sure you know whether your PCB holes are sized ONLY for the pin connectors or if they'll take the small lugs as well (I lay out my PCBs to take the small lugs, but not everyone does)

User avatar
KittenVillage
Wiggling with Experience
Posts: 281
Joined: Sun Feb 17, 2019 10:30 am
Location: Glenshaw, PA
Contact:

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by KittenVillage » Fri Apr 02, 2021 12:18 pm

ixtern wrote:
Fri Apr 02, 2021 5:40 am
Hales wrote:
Sat Mar 27, 2021 11:56 am
Looking for 1 Sub Mini DPDT ON ON Toggle Switch… anyone?
Only source from which I am buying such switches is Thonk:
https://www.thonk.co.uk/shop/sub-mini-toggle-switches/
The cheapest way I've found to get submini switches is to look for wonderco_buy on ebay. He will combine shipping if you message him and not just instant buy on the site. He's also got the part numbers as preview graphics on most of them so you can really dial in what each means and get exactly what you are looking for. (Though it does look like his shipping prices are now a lot more than when I ordered last year.) https://www.ebay.com/str/wondercobuy79? ... ure+Toggle


Eurorack is an exercise in delayed desire.

User avatar
Altitude909
Super Deluxe Wiggler
Posts: 3684
Joined: Wed Aug 24, 2011 5:13 pm
Location: Meesheegan

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by Altitude909 » Fri Apr 02, 2021 12:36 pm

ixtern wrote:
Fri Apr 02, 2021 5:40 am
Hales wrote:
Sat Mar 27, 2021 11:56 am
Looking for 1 Sub Mini DPDT ON ON Toggle Switch… anyone?
Only source from which I am buying such switches is Thonk:
https://www.thonk.co.uk/shop/sub-mini-toggle-switches/
http://smallbear-electronics.mybigcomme ... red&page=2

its a bit confusing what size is what so make sure you get the sub-mini

banedox
Common Wiggler
Posts: 168
Joined: Thu Aug 27, 2015 7:19 am
Location: United States
Contact:

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by banedox » Fri Apr 02, 2021 12:38 pm

I have the complete v1 diy polivoks complete set. Filter is done minus the 2 way switch I broke. Mixer is fine but can't find instructions for it. I have the vco, Adsr, vca printed inductions and full kits with all parts in baggies. Some knobs, Jack's and pots are unorganized

User avatar
BadPixel
Common Wiggler
Posts: 72
Joined: Tue Nov 06, 2018 8:23 am
Location: Stockholm, Sweden

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by BadPixel » Sat Apr 03, 2021 2:19 pm

synth.void wrote:
Fri Apr 02, 2021 4:15 am
steviet wrote:
Thu Apr 01, 2021 5:24 pm
synth.void wrote:
Thu Apr 01, 2021 5:19 pm
steviet wrote:
Sat Mar 27, 2021 8:03 pm
Looking for 2 of the CS4270-CZZ Audio Codec for the Norns shield... they're just about impossible to find right now.
I've just ordered one from AliExpress – the price defeats the purpose of DIYing the thing, but at this point I just want to get through with it.
Great minds think-alike! Or impatient minds :hihi: I grabbed a couple off of Alibaba as well, here's to hoping they are genuine!

Also, be careful, I was offered a 20TTSOP package CS4270-CZZ on Alibaba. I double checked to make sure they send a 24TTSOP package chip.
Good catch, it's actually a 20TTSOP
I’ve been scouting both AliExpress and Alibaba for these. Bought a couple before Christmas at decent prices still but now it’s just loco. I’ve been offered prices ranging from $15 to over $30 a piece buying quantities from 20 and up :/ For some reason they keep on listing them as 20TSSOP but I’ve had no issues asking for pictures of the chips before ordering and only received genuine chips so far from there. And in the rare case it’s gone sideways I’ve never had any issues with refunds. Haven’t had to retort to any disputes... yet anyway.

User avatar
synth.void
Common Wiggler
Posts: 231
Joined: Mon Jan 27, 2020 6:50 pm

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by synth.void » Sat Apr 03, 2021 5:06 pm

BadPixel wrote:
Sat Apr 03, 2021 2:19 pm
synth.void wrote:
Fri Apr 02, 2021 4:15 am
steviet wrote:
Thu Apr 01, 2021 5:24 pm
synth.void wrote:
Thu Apr 01, 2021 5:19 pm
steviet wrote:
Sat Mar 27, 2021 8:03 pm
Looking for 2 of the CS4270-CZZ Audio Codec for the Norns shield... they're just about impossible to find right now.
I've just ordered one from AliExpress – the price defeats the purpose of DIYing the thing, but at this point I just want to get through with it.
Great minds think-alike! Or impatient minds :hihi: I grabbed a couple off of Alibaba as well, here's to hoping they are genuine!

Also, be careful, I was offered a 20TTSOP package CS4270-CZZ on Alibaba. I double checked to make sure they send a 24TTSOP package chip.
Good catch, it's actually a 20TTSOP
I’ve been offered prices ranging from $15 to over $30 a piece buying quantities from 20 and up :/ For some reason they keep on listing them as 20TSSOP
Yea, it's all about counting pins on the chip, right?

User avatar
BadPixel
Common Wiggler
Posts: 72
Joined: Tue Nov 06, 2018 8:23 am
Location: Stockholm, Sweden

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by BadPixel » Sun Apr 04, 2021 12:13 pm

synth.void wrote:
Sat Apr 03, 2021 5:06 pm
Yea, it's all about counting pins on the chip, right?
Yeah...no. But you can be pretty sure it's not legit if they send you a pic of a 20 pin IC with CS4270 photoshopped on top ;)

User avatar
thesingingarc
Learning to Wiggle
Posts: 4
Joined: Mon Mar 08, 2021 2:25 pm

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by thesingingarc » Wed Apr 07, 2021 12:24 am

Hello All.

First post here. I'm looking for a THAT340 for my Oakley build I have some tl0824s to trade but of course am offering cash too. UK preferred.

Thanks!
Modular Grid - Ding Dang Horribly Whilst High
n00b, learning, background in studio recording.

User avatar
okuhtfesa
Learning to Wiggle
Posts: 16
Joined: Thu Dec 25, 2014 6:29 am
Location: France

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by okuhtfesa » Thu Apr 08, 2021 2:56 am

I have got some parts to exchange only, as all suplliers are out of stock right now and for a long time :

I have :

2 X STM32F405RGT6

and I need

1 X STM32F103CBT6
2 X STM32F373RBT6

Those chips are used on the Mutable Instruments DIY stuffs. Mines are regular ones coming from Mouser (I can show my bill) and I need authentic ones coming from a main supplier. From France or UE only for shippement convience.

Cheers
Moi vouloir être chat

User avatar
FetidEye
demonic space drone
Posts: 2165
Joined: Mon Dec 06, 2010 5:00 pm
Location: Red Zone
Contact:

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by FetidEye » Thu Apr 08, 2021 8:33 am

Bamboombaps wrote:
Tue Feb 16, 2021 1:02 pm
Here's my latest list
A load of new blank designs
Erica oscillator
Erica envelope
Erica swamp
Erica bbd
Long Moraydular busboards
BMC panels , decaying analogue noise and FM drum
Sparkfun proto pedal
Synthsizer ruler
Oh and also a goofed up panel for the cutlasses glitch delay project which needs mounting holes drilled and is ever so slightly misaligned but useable if you don't have anything else

Interested in euro PCB panels sets or send your list ☺️👍

IMG_20210216_145109.jpgIMG_20210216_145414.jpgIMG_20210216_153934.jpgIMG_20210216_153915.jpgIMG_20210216_144953.jpgIMG_20210216_143247.jpgIMG_20210216_144607.jpg16134984505866329925152421602517.jpg
hey Bamboombap, can you PM me? I got your package ready!

User avatar
KittenVillage
Wiggling with Experience
Posts: 281
Joined: Sun Feb 17, 2019 10:30 am
Location: Glenshaw, PA
Contact:

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by KittenVillage » Thu Apr 08, 2021 5:50 pm

I'm looking for a Fates pcb if anyone has one to trade.
Last edited by KittenVillage on Fri Apr 09, 2021 1:43 pm, edited 1 time in total.


Eurorack is an exercise in delayed desire.

User avatar
sduck
experimental use of gravity
Posts: 14231
Joined: Wed Feb 18, 2009 6:03 pm
Location: Vortepexaion, TN, USA

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by sduck » Thu Apr 08, 2021 11:27 pm

Please folks, this is a trading only thread - if you want to buy something, use the Want to Buy forum; sell stuff, use the For Sale Trade forum. Don't want to get the moderators upset. Of course no-one needs to know what's in your PMs :wink:
flickr cloud of sound touyube NOT A MODERATOR ANYMORE

Post Reply

Return to “Music Tech DIY”