DIY Trade Thread [ Parts, PCBs, Panels ]

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: Kent, Joe., luketeaford, lisa

Post Reply
letness
Learning to Wiggle
Posts: 27
Joined: Tue Dec 01, 2015 10:04 pm
Location: Baltimore, MD USA

Post by letness » Mon Jan 22, 2018 11:54 pm

[edit]meant to PM--failed.
Last edited by letness on Fri Jan 26, 2018 9:15 pm, edited 1 time in total.

User avatar
TitoCas
Common Wiggler
Posts: 114
Joined: Sat Feb 27, 2016 8:54 am
Location: Italy

Post by TitoCas » Tue Jan 23, 2018 11:21 am

I'm looking for
one Alpha R17 2P4T

I have many components and parts for trade, just ask and I'll check for it.

Also, I have some IC already posted in this 3ad , have a look at it.

cheers :guinness:
Last edited by TitoCas on Sun Sep 16, 2018 6:12 am, edited 1 time in total.
www.audiohacklab.org
www.brusionetlabel.net
www.mainoff.it
_____________________________________
Always looking for PCBs and panels

User avatar
Paradigm X
Super Deluxe Wiggler
Posts: 2056
Joined: Tue Nov 02, 2010 5:43 am

Post by Paradigm X » Fri Jan 26, 2018 9:08 am

i have two full sets of x0xb0x switch caps if anyone needs them, swap for WHY

i switched the tact switches with some nice ones from rv0.be but the old caps dont fit the new switches. frankly id buy the rv0 switches if youve not bought tacts yet (theyre loads better than the default x0x tacts) but if you need them for existing switches i have them. mainly black, with 4 white (i think) and one red

cheers

Jarno
Super Deluxe Wiggler
Posts: 2799
Joined: Mon Nov 15, 2010 6:34 am
Location: Rosmalen, NL

Post by Jarno » Fri Jan 26, 2018 4:45 pm

I still have a bunch of boards:
Image

From right to left:
Top and bottom of a buffer amp (opamp and BD139-BD140 followers, basically a small power amp), multipurpose, I used a pair of them for my ringmodulator.

A board for a Taurus VCF and VCA combo, nuff said nice transistorladder VCF

A board for a cracklebox noisemaker

Top and bottom of a board for the EMS VCF circuit as posted on Yves' website and a simple VCA I found somewhere else.

Looking for a board for the Serge DUSG/VCS circuit so I do not have to finish my own :)

(I have a bunch more boards, let me know if you are looking for something)

gnobs
Learning to Wiggle
Posts: 3
Joined: Sun Apr 13, 2014 11:45 pm

Ambika SMR PCB For Trade

Post by gnobs » Mon Mar 05, 2018 4:23 pm

Hey all - I have 6 extra Ambika SMR4 PCB's from allpcb using MI github .brd files. Looking to trade for a motherboard PCB - within US preferably for shipping reasons.
This is the product of my first time getting PCB's made, have spot checked some traces and seem to be in order. Won't know for sure until I build them.
You'll notice from the photo the component markings on the silkscreen didn't come through but easy enough to figure out from the .brd files. Not sure why, again first time making PCB.Image

Jarno
Super Deluxe Wiggler
Posts: 2799
Joined: Mon Nov 15, 2010 6:34 am
Location: Rosmalen, NL

Re: Ambika SMR PCB For Trade

Post by Jarno » Tue Mar 06, 2018 8:13 am

gnobs wrote:Not sure why
That's caused by layers and the conversion to Gerber in Eagle, you can choose which layers are exported to silk and which ones are not, a bit of a trial and error thing especially when using component libraries from various sources.

User avatar
duff
Veteran Wiggler
Posts: 748
Joined: Sun Mar 10, 2013 2:21 pm
Location: UK

Post by duff » Fri Mar 09, 2018 12:37 pm

I have some PCBs which I have purchased or picked up through previous trades that I am looking to move on to new homes. Most are euro orientated, at least in terms of the power connector and panels that might be available for them.
As my euro rack is already very over full and I am now expanding in 4U - coz :nana: - I am primarily looking for CGS PCBS although would be interested in anything that might suit my 4U set up (Stroh, Haible, Clee, etc..).

If you have PCBs to trade but nothing here takes your fancy please PM me as I have a stacks of other components from jelly bean to rare that we might be able to do a deal with. Alternatively, if you see something you want feel free to make a trade offer based on what you have. Most of these have been here a while so I am keen to get them to a new owner who can give them the love they deserve.

2 x Turing Machine Mk 1 PCBs
1 x Turing Machine Pulses Expander PCB
2 x Manhatten Analog CVP PCBs
1 x Yusynth Gated Slew
1 x Ian Fritz 5 Pulser
2 x Pure VCF PCBs (old TH version)
1 x Pure LFO PCB (old TH version)
1 x Mutable Instruments Frames PCB
1 x Horstronic Joystick PCB
1 x Dual OR Gates
1 x Dual AND Gates
1 x Ring Mod
0 x Fonik PS3100 PCB (the core PCB)
0 x O&C PCB (can include a drilled panel)
1 x VDD 3005 Buffered Multiple

Image

Jarno
Super Deluxe Wiggler
Posts: 2799
Joined: Mon Nov 15, 2010 6:34 am
Location: Rosmalen, NL

Post by Jarno » Sun Apr 01, 2018 3:40 am

Ahoy!

So, last night I ordered a bunch of components at Mouser, amongst which are weirdo switches, thinking that I still had the PCB set for the Turing MkII, seems that I already swapped it for something else......

So, does anybody have a PCB kit with frontpanel (PCB frontpanel is just fine) for the Turing Machine Mk II (sorry Duff :) )?

To swap I have Braids PCB's, Stroh Ultrafade VCO, Stroh Optogates, Stroh Sample & Shift, Random Source Chaquo, as well as my own boards (Moog Taurus VCF/VCA, EMS diodeladder VCF and regular VCA, Sequential Switch).
Also, I have some Elby boards, the CGS Psycho LFO and Fritz AD/AR, I do not have the small boards that go with it though (for pots 'n jacks).

Help! Turing machine MkII PCB's and frontpanel anyone?

User avatar
autodafe
Wiggling with Experience
Posts: 371
Joined: Mon Oct 02, 2017 3:14 am
Location: Italy
Contact:

Post by autodafe » Mon Apr 02, 2018 4:56 am

I have bought a stock of stuff, and I now have 2 panels for a Yusynth VCS3 VCF, if anyone is interested in them, just PM. trading with other boards/panel would be cool.
Looking for Btanches PCBm, for example, but any other Euro stuff wuld be ok.
Image

SoundPool
Veteran Wiggler
Posts: 584
Joined: Sun Nov 16, 2008 11:15 am
Location: Vienna

Post by SoundPool » Sun Apr 15, 2018 12:57 pm

looking for some PCBs, I have lots to trade in PCBs/Panels and possibly other parts- let me know what you are looking for.

Currently hunting for
Synthrotek Sequence 8 and Dirt
Circuitbenders Harmonic Engine
Last edited by SoundPool on Thu Apr 26, 2018 4:11 am, edited 1 time in total.

User avatar
mrand
Common Wiggler
Posts: 213
Joined: Thu May 23, 2013 11:26 pm
Location: Whitehorse, Yukon
Contact:

alfa rpar

Post by mrand » Sun Apr 15, 2018 8:31 pm

I have many as3340vco, as3320vcf, and as3310adsr.
Looking to trade 1:1 for as3360vca or ssi2144, in any quantity.
Any other new chips out I don't know about yet?
Would also entertain trades for other stuff, but seems like it would be hard to find a good fit.
I'm in Canada.
Cheers, thanks for looking.

User avatar
duff
Veteran Wiggler
Posts: 748
Joined: Sun Mar 10, 2013 2:21 pm
Location: UK

Post by duff » Sun Apr 22, 2018 2:17 pm

duff wrote:I have some PCBs which I have purchased or picked up through previous trades that I am looking to move on to new homes. Most are euro orientated, at least in terms of the power connector and panels that might be available for them.
As my euro rack is already very over full and I am now expanding in 4U - coz :nana: - I am primarily looking for CGS PCBS although would be interested in anything that might suit my 4U set up (Stroh, Haible, Clee, etc..).

If you have PCBs to trade but nothing here takes your fancy please PM me as I have a stacks of other components from jelly bean to rare that we might be able to do a deal with. Alternatively, if you see something you want feel free to make a trade offer based on what you have. Most of these have been here a while so I am keen to get them to a new owner who can give them the love they deserve.

2 x Turing Machine Mk 1 PCBs
1 x Turing Machine Pulses Expander PCB
2 x Manhatten Analog CVP PCBs
1 x Yusynth Gated Slew
1 x Ian Fritz 5 Pulser
2 x Pure VCF PCBs (old TH version)
1 x Pure LFO PCB (old TH version)
1 x Mutable Instruments Frames PCB
1 x Horstronic Joystick PCB
1 x Dual OR Gates
1 x Dual AND Gates
1 x Ring Mod
0 x Fonik PS3100 PCB (the core PCB)
0 x O&C PCB (can include a drilled panel)
1 x VDD 3005 Buffered Multiple

Image
Just found this Living VCO PCB and Panel set to add to the trade list.

Image

User avatar
krisp14u
Oakley4All!
Posts: 1176
Joined: Fri Jan 25, 2008 4:19 pm
Location: UK
Contact:

Post by krisp14u » Wed Apr 25, 2018 4:14 pm

Image
http://www.cesyg.com/page/products/euro-modules/dualfo/
open for trades on other PCB Panels

I also have some LM566CN VCO IC's to trade

looking for
SSM2220 dual PNP transistor DIP
SSM2210 dual NPN transistor DIP

I have lots of other stuff too
Cheers :guinness:

Paul
www.krisp1.com/store/
Fine Modular systems Built in Yorkshire UK EU Planet Earth

User avatar
snufkin
Ultra Wiggler
Posts: 820
Joined: Mon Jan 04, 2010 6:43 pm

Post by snufkin » Thu May 10, 2018 6:22 am

Hi all I have two benjolin PCBs from the euro compatible run but I would rather build two stand alone, anyone got 2 PCBs they would like to trade?

bishopmagicdonjuan
Learning to Wiggle
Posts: 38
Joined: Wed Sep 24, 2014 1:29 pm
Location: SAN DIEGO, CA

Post by bishopmagicdonjuan » Fri May 11, 2018 4:21 pm

Looking for a JH Living Vocoder PCB, as well as his Human Voice PCB


Anyone have any 10-turn Vernier Dials, and pots?

Spectrol or Philmore style with 1/4” shafts are what i’m looking for.

Cliff knobs too!

User avatar
OB1
Common Wiggler
Posts: 185
Joined: Fri Jan 12, 2018 7:11 am
Location: Bristol, UK
Contact:

Post by OB1 » Sun May 13, 2018 6:18 am

I've got about 9 or 10 spare Texas Instruments CD4093BE DIP ICs - I accidentally ordered twice as many as I needed.

Would like to trade for some opamps (TL074/TL072) if anyone's interested. Probably only worthwhile in the UK.

User avatar
TheMentat
Common Wiggler
Posts: 183
Joined: Thu Nov 30, 2017 1:48 am
Location: Ocean Park

Post by TheMentat » Sat May 19, 2018 12:01 pm

I'm looking for some yarns PCBs. If you have some extra hit me up!

Chorusguy
Learning to Wiggle
Posts: 4
Joined: Sun Jul 22, 2018 9:45 am

MN3002

Post by Chorusguy » Sun Jul 22, 2018 10:58 am

I'm looking for some MN3002 BBD IC's,feel free to shoot me a pm if anyone has any.

User avatar
synthetek
Veteran Wiggler
Posts: 507
Joined: Fri Jun 05, 2015 3:32 am
Location: Orange County, California
Contact:

Post by synthetek » Fri Jul 27, 2018 5:57 pm

I have an Oakley MultiMix PCB + pot bracket kit


I dont have any 5U stuff so I probably wont ever use this. Trade for something Euro format or? Prefer to ship to US only.

Thanks

User avatar
bmoren
Common Wiggler
Posts: 124
Joined: Thu Jul 27, 2017 10:24 am
Location: us

Post by bmoren » Sat Jul 28, 2018 10:01 am

I've got PCB/panel sets available of Nearness w/ attenuators
https://www.modulargrid.net/e/other-unk ... d-nearness

Image

User avatar
FetidEye
demonic space drone
Posts: 2141
Joined: Mon Dec 06, 2010 5:00 pm
Location: Red Zone
Contact:

Post by FetidEye » Thu Aug 09, 2018 6:04 am

For trade:
8x A500k vertical 9mm alpha pots (new)
3x A50k vertical 9mm alpha pots (new)
bought at Thonk

PCB's: (smd is no good for me)
1x Warps
2x Ornament and Crime
1x Temps Utils
1x 4MS SMR


I'm looking for:
9mm vertical A100k, B100k, B10k
right-angled 9mm or 16mm b10k pots.
Davies in all colors.
Thonkiconn jacks.
video pcb's.
Last edited by FetidEye on Mon Aug 13, 2018 11:10 am, edited 1 time in total.

User avatar
Waz
Wiggling with Scurvy
Posts: 2746
Joined: Mon Mar 02, 2009 1:36 pm
Location: Detroit

Post by Waz » Thu Aug 09, 2018 3:14 pm

Looking for Benjolin (Eurorack) PCBs. Preferably in the US to save shipping costs.

If you have a fancy pants front panel (not the cheap ones from Pusherman), I might straight up trade my Xoxbox boards+Faceplate (Desktop version) for a set.

shogeki
Common Wiggler
Posts: 104
Joined: Tue Oct 29, 2013 11:01 am
Location: NYC

Post by shogeki » Mon Aug 20, 2018 3:21 pm

For Trade:

(From synthesizer.com):
- Q131 Single-Width Blank Panel x 16 (2 of them got out of the original package and have slight scratches on the surface)
- Q132 Double-Width Blank Panel x 6 (New)
- Q134 Octal-Width Blank Panel x 1 (New)
- 1x QCR8 8-Space Rack Frame x 4 (New)

(Other)
- 1x Kurzweil K2000R (Working)
- 2 x Yusynth Oscillator (Assembled, no potentiometers or hookups, NOT TESTED)
- 1 x Yusynth CV (Assembled, no potentiometers or hookups, NOT TESTED)


Looking for:

- Eurorack cases
- Any Eurorack module (PCB, Kit, assembled)
- Pedals and effects (Analog)
- Casio CZ-1, Ensoniq VFX,Kawai K3M
- Exotic synthesizer memory modules (Cartridge, cards, pcbs..)

I have a lot more, I will update this post.

User avatar
Bamboombaps
Wiggling with Experience
Posts: 421
Joined: Wed Sep 16, 2015 7:14 am
Location: Glasgow

Post by Bamboombaps » Wed Aug 29, 2018 6:50 am

ive got a few Nootropic designs arduino sheild pcbs- the DJ sheild and the Audio hacker

https://nootropicdesign.com/audiohacker/
https://nootropicdesign.com/djshield/

also a few EA Tremolo pedal pcbs

https://www.rullywow.com/ea-tremolo-free-diy-project/

looking for euro pcb panels or pedal pcbs or whatever

User avatar
jayndoodle
Learning to Wiggle
Posts: 21
Joined: Wed Nov 22, 2017 6:59 am
Contact:

Post by jayndoodle » Wed Aug 29, 2018 7:09 am

For trade:
1 x Braids Black Aluminum Panel

Looking for:
Anything!


Image
Modular Synth Catalog - Modular Haven

Find new, used, demo'd, b-stock & on-sale modules easily

Post Reply

Return to “Music Tech DIY”