DIY Trade Thread [ Parts, PCBs, Panels ]

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: lisa, luketeaford, Kent, Joe.

Post Reply
User avatar
Jaytee
Veteran Wiggler
Posts: 712
Joined: Mon Mar 11, 2013 5:12 pm

Post by Jaytee » Mon Sep 17, 2018 8:18 pm

goneI have a PCBs for a Ming Mecca World Core and Control Core that I’m realizing I’ll never build.

Would be interested in PCBs/panels for LFOs, VCAs, simple utility modules, stuff like that.

User avatar
Bamboombaps
Wiggling with Experience
Posts: 383
Joined: Wed Sep 16, 2015 7:14 am
Location: Glasgow

Post by Bamboombaps » Tue Sep 25, 2018 12:33 pm

I've got a set of MK3 phutney boards that I think I will never build without it becoming an albatross.

I'd like Lyra 8 boards and / or a haible kraut phaser boards or what you got

User avatar
Isaiah
Super Deluxe Wiggler
Posts: 1798
Joined: Wed Jun 02, 2010 6:31 am
Contact:

Post by Isaiah » Tue Sep 25, 2018 1:47 pm

I’m trying to get my hands on an EAS Miss10 HADSR V2 PCB.
If anyone has one or two that they’d trade or sell, please contact me!

muzo
Learning to Wiggle
Posts: 6
Joined: Wed Sep 26, 2018 3:06 pm

Post by muzo » Fri Sep 28, 2018 3:18 pm

jersupereq wrote:
In the next week I will also have some spare pcbs for the Pathos DJ Mixer 4 x Que, 1 x Input and 4 x Program As i was only able to order in sets of 5. Its basically a clone of the Bozack CMA-10-2DL made by Fabric Astronaut
hi :deadbanana:, PM ;-) :party:
Mi-homme, mi-jambon
50% human, 50% cheese

User avatar
Sin_Phi
Common Wiggler
Posts: 115
Joined: Fri Feb 06, 2015 10:10 am
Location: L.A. (Palos Verdes)
Contact:

Post by Sin_Phi » Fri Oct 05, 2018 9:17 pm

I have 25 VPL5C3/2 vactrols, the Excelitas variety. Got them before they went out of stock everywhere. I may build some lpg in the future, but a dozen or so of these could find a good home.

Would trade for 0_C, orgone accumulator or mutable kits.

User avatar
kamielsd
Learning to Wiggle
Posts: 20
Joined: Mon Feb 26, 2018 6:04 am
Contact:

Post by kamielsd » Sat Oct 06, 2018 7:00 am

looking for some 15or so thonkiconns and 1 or 2 16/16 euro powercables to further postpone placing my next thonk order.
Have 1 synthrotek superpower pcb + panel to offer, open for other trades as well.

User avatar
lasesentaysiete
Super Deluxe Wiggler
Posts: 1442
Joined: Thu Feb 18, 2016 5:23 am
Location: Barcelona

Post by lasesentaysiete » Sun Oct 07, 2018 1:42 pm

all gone
Last edited by lasesentaysiete on Mon Nov 05, 2018 10:15 am, edited 1 time in total.

Jarno
Super Deluxe Wiggler
Posts: 2759
Joined: Mon Nov 15, 2010 6:34 am
Location: Rosmalen, NL

Post by Jarno » Sun Oct 07, 2018 2:47 pm

Those Moog boards are interesting! Nice work!

I still have the following PCB's:
TR808 and TR909 noise (shift reg. and transistor, I have the 4006's)
Dual log VCA
Dual lin VCA (with CA3046, off which I have plenty so you can get this with the PCB)
Mixer (flexible mixer PCB, lends itself to cascading or more inputs, SMT or DIP opamp)
EMS VCF and VCA (yusynth circuit of a diodeladder VCF, and a simple VCA)
Dual triangle VCO (LM13700, lots of SMT)
CZ-1 vco (jan ostman, but code is open source, so make your own)
Sequential switch
Dual balanced output (opamp)
Non inverting gain stage, dual
Power stage (opamp and followers, headphones, spring reverb, slinky, drive whatever etc.)
Buchla 144 square wave generator (VCO)

User avatar
appliancide
Super Deluxe Wiggler
Posts: 1460
Joined: Fri Dec 17, 2010 9:51 am
Location: Idiocracy

Post by appliancide » Sun Oct 14, 2018 4:28 pm

Found what I was looking for

User avatar
ACME
Learning to Wiggle
Posts: 35
Joined: Wed Jan 17, 2018 8:39 am
Location: Germany

Post by ACME » Mon Nov 05, 2018 3:32 am

I am looking for

ROLAND IR3R01 EG CHIPS.

Can someone help me there?

Markus

User avatar
J3RK
Super Deluxe Wiggler
Posts: 6551
Joined: Tue Dec 22, 2009 12:46 pm
Location: Seattle

Post by J3RK » Tue Nov 06, 2018 10:29 pm

Oops. Wrong thread.
Are you lemon? Does your head come to a nub?

User avatar
duff
Veteran Wiggler
Posts: 747
Joined: Sun Mar 10, 2013 2:21 pm
Location: UK

Post by duff » Fri Nov 09, 2018 11:47 am

Looking for 4 (or more I guess) pin 156 distro boards

Still have all this stuff....
duff wrote: 2 x Turing Machine Mk 1 PCBs
1 x Turing Machine Pulses Expander PCB
2 x Manhatten Analog CVP PCBs
1 x Yusynth Gated Slew
1 x Ian Fritz 5 Pulser
2 x Pure VCF PCBs (old TH version)
1 x Pure LFO PCB (old TH version)
1 x Mutable Instruments Frames PCB
1 x Horstronic Joystick PCB
1 x Dual OR Gates
1 x Dual AND Gates
1 x Ring Mod
1 x VDD 3005 Buffered Multiple
1 x Living VCO PCB and Panel set

User avatar
breadman
Common Wiggler
Posts: 126
Joined: Mon Jun 18, 2012 6:22 pm
Location: PDX yo

Post by breadman » Thu Nov 15, 2018 3:01 pm

Hey all, does anyone have the hookup on larger polystyrene/styroflex caps, especially 22NF and 47NF?
Need a synth built in the USA? Get in touch!

rectangle cru

electric mist
Common Wiggler
Posts: 52
Joined: Tue Aug 08, 2017 12:31 pm
Location: Brussel

Post by electric mist » Tue Nov 20, 2018 4:34 am

Hi,
I have following pcb/panel sets for trade.

2x Temps Utile
1x OC
2x Plancks (v1)
3x Blue Lantern Rings

Edit : Yarns is gone
Last edited by electric mist on Fri Nov 23, 2018 4:58 pm, edited 1 time in total.

Jarno
Super Deluxe Wiggler
Posts: 2759
Joined: Mon Nov 15, 2010 6:34 am
Location: Rosmalen, NL

Post by Jarno » Tue Nov 20, 2018 4:49 am

breadman wrote:Hey all, does anyone have the hookup on larger polystyrene/styroflex caps, especially 22NF and 47NF?
Ebay?

Note that the value for these is usually indicated in pF and that the letter in front indicates a tolerance value "H" is +/-2.5% apparently, which is already pretty good for a cap, you can get these in tighter tolerances.
I think I have a few in 47nF, not sure about 22nF.

User avatar
MickMad
Learning to Wiggle
Posts: 30
Joined: Fri May 18, 2018 11:40 am
Location: Italy

Post by MickMad » Wed Nov 28, 2018 9:10 am

Hi everyone,

I got some MFOS SLMS panels for the Eurorack SMT version by David Haillant (https://www.davidhaillant.com/mfos-soun ... ions-v1-2/) (I got 9 to be precise).

The panel is made of PCB and it looks quite nice, you can find a pic in the attachments :)
You do not have the required permissions to view the files attached to this post.

User avatar
Bamboombaps
Wiggling with Experience
Posts: 383
Joined: Wed Sep 16, 2015 7:14 am
Location: Glasgow

Post by Bamboombaps » Thu Dec 20, 2018 7:11 pm

I have a set of Phutney PCBs I'd trade for a Lyra 8 PCB set[/img]

Branko
Common Wiggler
Posts: 168
Joined: Thu Oct 20, 2016 10:03 am

Post by Branko » Fri Dec 21, 2018 12:44 am

Bamboombaps wrote:I have a set of Phutney PCBs I'd trade for a Lyra 8 PCB set[/img]
How hard is it to source parts for the Phutney?

User avatar
Bamboombaps
Wiggling with Experience
Posts: 383
Joined: Wed Sep 16, 2015 7:14 am
Location: Glasgow

Post by Bamboombaps » Fri Dec 21, 2018 2:10 am

I'm assuming hard but I never tried. Too big a project for a mug like me

https://www.dsl-man.de/plugins/servlet/ ... ew/9732212

User avatar
acgenerator
Veteran Wiggler
Posts: 700
Joined: Tue Jun 30, 2015 8:44 am
Location: USA

Post by acgenerator » Tue Dec 25, 2018 8:17 am

Does anyone have a Nonlinear Circuits Hyper Wien PCB/panel lying around?

I've been searching for a while with no luck.

User avatar
Kroaton
Common Wiggler
Posts: 90
Joined: Sun May 24, 2015 8:11 pm
Location: Bucharest, Romania

Post by Kroaton » Thu Dec 27, 2018 8:15 am

Looking to trade the following Mutable Instruments PCB's (high quality boards with the actual module names stenciled on them).

2x Ripples
2x Peaks
1x Tides
2x Warps
1x Clouds (v0.2)
1x Rings
1x Streams
2x Braids
1x Elements

I'm not looking to trade them for anything specific but I am on the lookout for things that might fit in a skiff (Moog 104HP), Turing Machine MKI panel and Befaco Rampage and Hexa panels.

Cheers.

User avatar
Reality Checkpoint
Confused By Electricity
Posts: 3905
Joined: Wed Apr 15, 2009 4:06 am
Location: Al Aqsa

Post by Reality Checkpoint » Thu Dec 27, 2018 9:33 am

I have a couple of hundred PJ301BM jacks:

Image
Image

Looking for Cinch Jones banana jacks (any colour) and/or banana cables.

User avatar
cannonball swandive
Veteran Wiggler
Posts: 655
Joined: Tue Dec 10, 2013 11:24 am

Butterfly Benjolin

Post by cannonball swandive » Thu Jan 03, 2019 7:17 am

Not using it much anymore. Fully modded Butterfly benjolin. Never made a proper case for it. Also have Makenoise Echophone/Phonogene panels. Dubbledecca panel and pcb as well. Looking for Mutable DIY stuffs or something interesting as trade.




Image

User avatar
Bamboombaps
Wiggling with Experience
Posts: 383
Joined: Wed Sep 16, 2015 7:14 am
Location: Glasgow

Post by Bamboombaps » Sat Jan 19, 2019 4:42 am

Yellow ST eurokastle PCB and panel, looking for more PCB/panel sets
You do not have the required permissions to view the files attached to this post.

jochem
Learning to Wiggle
Posts: 18
Joined: Fri Nov 18, 2016 1:09 pm
Location: netherlands

Post by jochem » Wed Jan 30, 2019 2:09 am

I found a SID 6581 chip in my parts drawer. I have used it with a messiah cartridge and stereo sid adapter, but have sold all the c64 stuff.

Open for trades, let me know what you have.
Item is located in the Netherlands.

Post Reply

Return to “Music Tech DIY”