DIY Trade Thread [ Parts, PCBs, Panels ]

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: lisa, luketeaford, Kent, Joe.

Post Reply
User avatar
Ultra Wiggler
Posts: 940
Joined: Fri Mar 14, 2014 8:37 pm
Location: New Zealand

Post by AlanP » Wed Apr 24, 2019 9:36 pm

Wanting two panels for the Befaco Tube VCA (the 11HP one.) Willing to trade or $.

Common Wiggler
Posts: 63
Joined: Fri Apr 01, 2016 6:07 am

Post by kashmir » Fri Apr 26, 2019 7:42 am

I have for trade>

Model 1011 Discrete Oscillator – Slightly Nasty
2x white panel + pcbs + parts + knobs etc

4MS RCD panel + pcb + expander panel + 90% of parts

9EB2C1B TAD Reverb tank

AMSYNTHS diy 3320 filter PCB + filter chip
AMSYNTHS diy 2040 filter PCB + filter chip
AMSYNTHS diy Roland 100 build but untested PCB + BA6110 chips

Bud Ac-423 two boats

I´m looking for anything I can use for buchla diy (panels, parts, etc..), preferably in europe.
Last edited by kashmir on Mon Sep 16, 2019 7:20 am, edited 5 times in total.

User avatar
Super Deluxe Wiggler
Posts: 4496
Joined: Wed Nov 09, 2011 2:51 pm

Post by batchas » Sat Apr 27, 2019 3:20 am

EDIT / DELETED: I'm gonna have to wait a bit for this.

Learning to Wiggle
Posts: 29
Joined: Tue Feb 19, 2019 9:02 am
Location: Central Ohio

Post by Boris_Yeltsin » Mon May 13, 2019 1:15 pm

I'm looking for a TSNM 3U pcb and panel, willing to pay $ or trade some mutable stuff I have.

User avatar
Common Wiggler
Posts: 132
Joined: Tue Aug 26, 2014 6:48 am
Location: Australia

Post by Virusinstaller » Tue May 14, 2019 3:28 am

kashmir wrote:I have for trade>

Model 1011 Discrete Oscillator – Slightly Nasty
2x white panel + pcbs + parts + knobs etc

4x 258j J3rk PCB - two older, two newer

4MS RCD panel + pcb + expander panel + 99% of parts

MTM spring reverb panel+pcb, partially stuffed + parts + 9EB2C1B TAD Reverb tank

AMSYNTHS diy 3320 filter PCB + filter chip
AMSYNTHS diy 2040 filter PCB + filter chip
AMSYNTHS diy Roland 100 build but untested PCB + BA6110 chips
Sent you a PM Kashmir

RR480 CS80 eurorack filter, fully built but has small issues

Phonic taxidermist panel+pcb+chips

I´m looking for anything I can use for buchla diy (panels, parts, etc..)
Sent you a PM Kashmir

User avatar
Veteran Wiggler
Posts: 651
Joined: Sat Mar 12, 2011 11:13 pm
Location: Stockholm

Post by paperCUT » Fri May 17, 2019 12:20 am

I still have these sitting around, looking for any euro panel/pcb sets :bananaguitar:

5x CGS CGS02 Wavetable osc
8x old version CGS external input amplifier
1x CGS CGS07S switch board
1x CGS CGS03 Psycho LFO
1x CGS CGS01 Sub oscillator
1x CGS05 Parallel port adapter
1X 9090 TR-909 clone pcb set with wave and main processor ICs. I think I have the rare transistors as well but not certain. Let me know what they are and I'll check.
4x Toppobrillo Buchla 281/2 PCBs viewtopic.php?t=25298

User avatar
Super Deluxe Wiggler
Posts: 2524
Joined: Mon May 21, 2012 10:35 pm
Location: Boynton Beach, FL, USA

Post by xonetacular » Tue May 21, 2019 1:26 pm

I've got a DIY peaks populated already along with grayscale panel, rogan knobs, and usb firmware dongle. I don't have any euro any more to test it and haven't flashed it. PM me if interested with what you got

User avatar
Common Wiggler
Posts: 213
Joined: Tue May 05, 2015 2:02 pm
Location: Somewhere between yesterday and tomorrow.

Post by Staticcharge » Mon May 27, 2019 2:13 pm

I'm after two Aluminium per|former panels, ideally silver if anyone is planning to let some go drop me a PM. UK or EU.

User avatar
Common Wiggler
Posts: 223
Joined: Sat Aug 16, 2008 9:24 pm
Location: SF

Post by jersupereq » Thu May 30, 2019 5:18 pm

Have some spare Ian Fritz pcbs, these are the ones stocked by ModularAddict:
double well chaos
5 pulser waveshaper
threeler vcf
double deka vco, pcb set
teezer thru-zero vco

User avatar
Wiggling with Experience
Posts: 383
Joined: Wed Sep 16, 2015 7:14 am
Location: Glasgow

Post by Bamboombaps » Mon Jun 03, 2019 6:15 pm

I've got some spare sets of the new CTAG Strampler for trade

Info here ... jgsMwmDiAg

User avatar
Super Deluxe Wiggler
Posts: 1803
Joined: Thu Dec 28, 2017 5:42 pm
Location: Los Angeles, California

Post by cackland » Mon Jun 03, 2019 9:18 pm

Bamboombaps wrote:I've got some spare sets of the new CTAG Strampler for trade

Info here ... jgsMwmDiAg
The link is broken.

User avatar
experimental use of gravity
Posts: 13332
Joined: Wed Feb 18, 2009 6:03 pm
Location: Vortepexaion, TN, USA

Post by sduck » Mon Jun 03, 2019 11:30 pm

Try this - ... is-module/

(seems like a freakin awesome module. It's connected to the internet!)
flickr cloud of sound touyube NOT A MODERATOR ANYMORE

User avatar
Phantom Powers
Posts: 744
Joined: Sun Oct 03, 2010 3:14 am
Location: Rochester, NY

Post by Repeater » Tue Jun 04, 2019 8:26 am

I have a bunch of original Vactec VTL5C3/2 dual vactrols, not the reissues by XVive, etc.

Always looking for CGS Serge and Nonlinear Circuits PCBs.

I'm US based.

Learning to Wiggle
Posts: 3
Joined: Fri Jun 07, 2019 7:39 am
Location: portugal europe

Post by ARY » Fri Jun 07, 2019 8:34 am





User avatar
Common Wiggler
Posts: 219
Joined: Sun Apr 21, 2013 7:10 am
Location: Melbourne, Australia

Post by Acsii » Sat Aug 24, 2019 7:34 pm

I have some 7660 Surface mount ICs that I accidentally bought a while ago. Got about 10 if anybody wants any.
Call me Abby
I make music... Sort of...

User avatar
Super Deluxe Wiggler
Posts: 2399
Joined: Fri Dec 30, 2011 3:49 pm
Location: germany

Post by roglok » Mon Aug 26, 2019 3:31 pm

hey german wigglers, i'm looking for a single Davies 1900 with set screw in ivory or white. have lots of stuff for trade - just try me...

User avatar
Wiggling with Experience
Posts: 325
Joined: Fri May 08, 2009 3:42 am
Location: Brussels

Post by MicroFi » Fri Aug 30, 2019 9:19 am

Does anyone have a (source for a) case for the Mutable Instruments Module Tester?
I don't know if I'm ready to put down ~50 euro to have one made at

User avatar
Check Mate
Aquatic Beta Particle
Posts: 190
Joined: Mon Feb 07, 2011 1:18 pm
Location: Red Hills of Lardossia

Post by Check Mate » Tue Sep 10, 2019 4:42 am

I'm looking for 1x CEM 3310 Envelope (IC). The original curtis only, no AS Chip.

Thank you!

User avatar
Super Deluxe Wiggler
Posts: 1798
Joined: Wed Jun 02, 2010 6:31 am

Post by Isaiah » Mon Oct 21, 2019 8:48 am

I’m looking for an EAS Miss10 V2 HADSR PCB.
I can trade some Vactec VTL5C3/2s or just pay you.

Learning to Wiggle
Posts: 16
Joined: Thu Jul 09, 2015 3:14 pm
Location: Netherlands

Post by Quinie » Mon Oct 21, 2019 9:19 am

Looking for panels:

- Barton FM drum
- Barton analog drum.

Got lot's for trade, part's like jacks, ic's, pcb's, CV-pal (got 5).
Just try me..

Common Wiggler
Posts: 175
Joined: Wed Jul 26, 2017 6:02 am
Location: Johannesburg, South Africa

A few hundred PJ3410's and PJ302M's

Post by aragorn23 » Sun Oct 27, 2019 9:05 am

Hey all. I have around 200 PJ3410's and another 200 or so PJ302M's that are looking for a good home. Anyone interested in a swap of some kind?

PS: I'll be shipping these from South Africa, so I'd like to send them in one batch as the shipping costs will be quite high otherwise.

Common Wiggler
Posts: 62
Joined: Mon May 20, 2019 3:38 pm
Location: France

Post by charkachak » Wed Oct 30, 2019 1:08 am

I'm looking for a Sonic Potion CPU for my re-303 project. I can trade a complete set of rare parts for a x0xb0x :


Feel free to PM me if you wanna trade.

Common Wiggler
Posts: 130
Joined: Wed May 23, 2018 2:47 pm
Location: Oxford

Post by nrrrd » Wed Nov 27, 2019 10:34 am

I have a Turing Machine Mk2 PCB + black panel and the Volts and Pulses expanders, also with black panels available for trade.

I'm looking for any of the following CGS pcbs in exchange:

CGS113 - Triple wave multipliers
CGS75 - VCS / dual slopes
CGS112 - VQVCF / filter
CGS64 - Dual VCA


Learning to Wiggle
Posts: 23
Joined: Fri May 26, 2017 6:11 am

Post by kevin0 » Wed Nov 27, 2019 6:57 pm

I have the following PCBs:

Befaco Instrument Interface
Terminal Tedium + Panel
NLC Sloth + Panel
NLC Circle Jerk + Panel

Am looking for:

Any kind of function generator
Low Pass Gates
Euro buchla style timbre modules
Midi -> CV stuff

But I'm open to offers!

Learning to Wiggle
Posts: 50
Joined: Wed Feb 28, 2018 6:21 am
Location: czech

Post by wtk » Thu Dec 19, 2019 12:38 am

I have these spare:

jakplugg ugrids
jakplugg twist
jakplugg utemps
jakplugg quarks
jakplugg plancksII
jakplugg nanorings
jakplugg pique + black/gold panel
jakplugg threshold + black/gold panel
smr+pusherman panel
swn panel only
auxren soundnicer
antumbra dvca
16n faderbank
moraydular busboard small
moraydular busboard large
antumbra cara (2pcb set)+ black/gold panel
mmi attenuverter+panel
minx buffered multiple+panel
sin phi miasma
ujove pcb

can lasercut acrylic panels if needed.. not looking for anything specific atm, but any sound processing might interest me, drop me a list in pm and maybe i choose something, thanks

Post Reply

Return to “Music Tech DIY”