DIY Trade Thread [ Parts, PCBs, Panels ]

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: lisa, Kent, Joe.

Post Reply
W3C [Validator]
Learning to Wiggle
Posts: 3
Joined: Sun Dec 22, 2019 2:46 pm

Post by W3C [Validator] » Thu Dec 19, 2019 9:27 pm

I'm looking for: paper in oil caps, film caps in large values, BA6110 chips, spring reverb tanks, vintage knobs, and PCBs for modulation effects like chorus, delay, flange, etc. please PM me with inquiries. Thank you!

bishopmagicdonjuan
Learning to Wiggle
Posts: 27
Joined: Wed Sep 24, 2014 1:29 pm
Location: SAN DIEGO, CA

Post by bishopmagicdonjuan » Fri Dec 20, 2019 8:12 am

i'm looking for Cliff K1C knobs, Philmore S36 Vernier Dials, CA3046, and 1k 3500ppm tempcos.


I have vintage MN300x series BBD chips, and a couple Vintage Roland BA662s, and other Roland Vintage ICs.

barnabe42
Learning to Wiggle
Posts: 45
Joined: Sat Jan 21, 2017 12:56 am
Location: Finland

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by barnabe42 » Fri Dec 27, 2019 12:07 pm

Hi

I have some left over

2 x Blue Lantern Warps 12hp pcb & panel
1 x Blue Lantern Grains pcb & panel set (Clouds)
2 x Blue Lantern 12hp Rings pcbs & panel set

I am open but i looking for any VCA\mixer

User avatar
mamonu
90s ambient miscreant!!
Posts: 608
Joined: Tue Jul 20, 2010 4:08 pm
Location: Surrey, UK

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by mamonu » Thu Jan 02, 2020 4:36 am

viewtopic.php?f=74&t=225521

I would like to trade a DIY module that doesnt work well (needs troubleshooting)
for only postage costs

someone can either attempt to troubleshoot it or strip it for parts.

I would not mind a CGS04 mixer pcb but... even only postage costs im ok.
frac & 100m & eurorack (equal opportunities wiggler)
-----------------------------------------------
:blacet: :blacet: fracmodular.github.io :blacet: :blacet:

User avatar
funzel
Learning to Wiggle
Posts: 3
Joined: Wed Aug 23, 2017 2:36 pm
Location: Netherlands

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by funzel » Thu Jan 09, 2020 2:57 am

Hi guys,

I have a build erica polivoks vco here that does not track perfectly 1/volt octave. Its around 1/2 semitone off. The rest works fine. It is not in my rack for a while because of it. Does anyone want to trade for Eurorack stuff? (Moderator edit - no sales here) I am located in the Netherlands.

User avatar
Bartimaeus
Wiggling with Experience
Posts: 486
Joined: Sat Jun 22, 2013 4:05 pm
Location: Well that isn't very punk, is it?

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by Bartimaeus » Wed Jan 22, 2020 12:43 am

Hi all,

I'm looking for a RYO 3xVCA front panel (I have the pcbs already)

Have a bunch of parts I can trade, including a ton of guitar pedal related parts

User avatar
BadPixel
Learning to Wiggle
Posts: 31
Joined: Tue Nov 06, 2018 8:23 am
Location: Stockholm, Sweden

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by BadPixel » Thu Jan 23, 2020 3:35 am

Hi all!

A few bits and pieces I won't get around to build; Buchla 258J (PCB), Miss 10 VCF/VCA (PCB/panel), CGS MSU (panel) and CGS Funky Drummer (panel).

Possible trades (PCB + panel, EU preferably): O_c, Temps Utile, Westlicht Performer, Erica Polivoks VCO II (or shoot me PM with what you've got) :hyper:

Pics:
https://v2.pxl.se/image/0D4
https://v2.pxl.se/image/0Dw
https://v2.pxl.se/image/0Dm
https://v2.pxl.se/image/0Dh

UPDATE; Buchla PCB’s gone, O_c and T_u found.

User avatar
FetidEye
demonic space drone
Posts: 2011
Joined: Mon Dec 06, 2010 5:00 pm
Location: badlands

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by FetidEye » Fri Feb 14, 2020 7:52 am

I'm looking for 2x ADC0838CCN (used in a Ming Mecca world core)
It is out of stock at most dealers, such as Mouser, Tayda, RS, Digikey etc

User avatar
mrand
Common Wiggler
Posts: 114
Joined: Thu May 23, 2013 11:26 pm
Location: Whitehorse, Yukon
Contact:

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by mrand » Fri Feb 14, 2020 1:31 pm

Looking to trade pretty much anything that works for one of my new phaser modules.
It's 6hp and 45mm depth.
Sound demo available here:
https://soundcloud.com/synthesizernews/ ... haser-demo
I'm in Yukon, but also will pass through Vancouver in a month or so.
Thanks for looking!
phaser_euro_front_sm.jpg
You do not have the required permissions to view the files attached to this post.
--ssdp--

PacificState
Learning to Wiggle
Posts: 47
Joined: Wed May 01, 2013 10:19 am

Re: DIY Trade Thread [ Parts, PCBs, Panels ]

Post by PacificState » Mon Feb 17, 2020 3:10 pm

(hopefully I don't need 100 posts to post here - let me know if so!)

I have a set of Electric Music Store Buchla 208 REV2.1 boards for trade, still in their original packaging. I've already built another set of these, along with a 218 and 248 - so these are going spare.

Would trade for any other Buchla boards + panels, especially if they'd be a good match for my existing builds (246/258/259/266?).

Post Reply

Return to “Music Tech DIY”