DIY Trade Thread [ Parts, PCBs, Panels ]

[selfdestroyer]

I put this in the "Want to buy" section also, minus all the PCBs for trade of course. I just realized I was sitting on these PCBs and could offer up some trades.

I'm looking for 2 9mm B10k Dual Gain pots for my Miasma build. With Thonk not shipping to the US right now, I'm having issues finding them anywhere. I'll take any shaft type you might have.. I am also up for any other trades.. I just really need the pots.

I would also like to keep this in the US, since the post offices right now are not a place I want to be. But, maybe we can work something out.

PCBs and FR4 Panels I have to trade:
Note: All PCBs and Panels are black unless specified

3X Sinophi Miasam PCB (green) & Panel
4X Plum Audio DSO150Euro Scope v2.0 PCB & Panel
3X Monome Norns Sheid PCB
1X Mutable SMR-4 Voicecard
3X Greyscale Microcell PCBs only, No Panels
3X Mutable Modular Tester v0.2 PCB
2X Nearness Attenuated PCBs & Panels
2X TINRS Wobbler PCB only (They panels I ordered were done wrong and I have yet to reorder)
2X TINRS Tuesday PCB only (They panels I ordered were done wrong and I have yet to reorder)

I can add pictures if needed.

[kashmir]

Hello,

I have for trade:
8 pieces of 6U alu silver buchla boats, tinnerman nuts, some screws.
212,205 panel+pcb sets

Interested in:
buchla panel/PCB sets, parts or some kind of case/housing for Easel+218.

[muncky]

Sorry - hadn’t realised there was a dedicated thread, so had posted in the WTB sub forum - basically, I’ve got everything I need for my next boat, except a CGS113 TWM - anyone got any spares?

Got a few things I could trade, inc a Monsoon PCB, or happy to buy.

I’m in the UK

Thanks

[memorygardens]

Hey there,

Digging through my backlog and trying to clear some stuff out. Shipping to lower 48 in the US only, trying to use USPS to give them some support. Thank you!

Have for trade

PCB's (unpopulated)
Barton musical circuits- Guitar Input
Barton musical circuits- Analog Drum
CGS180- Drum Simulator
CGS81- CV Processor
J3rk- PICO VCO x2
GMSN!- Through hole Clouds
A. Lantern- Preamp & Envelop Detector
A. Lantern-Pulser & Inverter
A. Lantern- Envelop Generator
Flux Monkey- 194 x2
Flux Monkey- 111
Flux Monkey-Easel Random Voltage Source x2
Flux Monkey-160

PCB (Populated)
Flux Monkey- 194 (wired with tini jacks)

Kits
Buchla Music Easel Envelope Generator- Panel and PCB
Buchla 266r- Panel (undrilled) PCB and PCB Cables/Pin connector
Buchal Quad Control Valtage Processor- PCBs and Panels x2

Panels
Buchla MFOS Wavefreaker

Random
Buchla Distro Board
Cincon CHB75-12S05 x1
Tinnermans
100 Series CV Touch PCB. Only have a Schematic to build it.


Wants

73-75 PCBs and Panels. Homebuilt, Voice or Control

Loudest Warning Panels
CGS92 / CGS97 - Smooth Stepped Generator + Noise Panel
CGS34 - Dual Analog Shift Register (ASR) Panel
CGS92 / CGS97 / CGS114 - Serge SSG / DTG / Noise Panel
CGS113 - Serge Wave Multipliers Panel
Programmer Sequencer Panel
CGS81 - Dual Processor
Pico VCO Panel

Random Source(PCB and Panels)
SERGE "CARNIVORE" (SSG/DTG/Noise)
Dual Slope Generator & CV Processor
Variable Q VCF/Stereo Mixer
Sequencer/ Programmer
SSG/Random Source

MOTM Panels and PCBs

Reverb Tanks- 1BC2E

[djs]

This is a set of 4 pcbs that can be used to make LED ring type controllers, plus 5 midibox pcbs to make it work (DIN R5, DOUT R5, MBHP_AINSER64, 2xCORE_LPC17). Also included is some resistor networks that I think are part off the midibox pcbs (I haven't checked). Nothing is soldered in to any place.

Interested in:
Buchla panels
CGS pcbs- particularly CGS48 VCO, DUSG, etc. Preferably newer version ones.
Jasper pcbs (I can add $$?)
Ambika voice chips (or voice cards)
Sonic Potions LXR pcbs
Interesting effects pcbs- especially delay or reverb based ones.

Honestly I'd prefer US only right now- not because I don't want to ship internationally, but with the virus, shipping overseas is problematic.

LED ring controllers.jpg

[jheronymo]

I’ve got some bare PCBs for trade:


Analogue Realities 914 Fixed Filter (Inductor version)

Horstronic Joystick

Yves Usson Transistor Ladder Filter

CGS 202 v1.1 - Serge Resonant EQ

Clee Quad VCA
Clee Quantizer (includes microcontroller, non-LCD version)

Stroh:
2x Pico VCO
2x Ultrafade VCO

Flux Monkey (Buchla):
160 Noise Generator 2x 111 Ring Mod
194 Fixed Filter Bank
2x Easel Random Voltage Source

MOTM 510 Wavewarper - PCB, Panel & backet

I’m interested in MOTM 5U parts: power connectors, Bourns pots, knobs. Also any guitar pedal PCBs or kits, or FX in general. Will also post to the Buy/Sell.

[roglok]

I have a Deckard's Dream Kit over in the B/S/T but figured the DIY subforum would be a better place so I hope it's OK to cross-post: viewtopic.php?f=74&t=233111

Probably a long shot but I'm looking for an RME Fireface 802 in exchange...

[kevin0]

Have some PCBs to trade:

PCB only:
Erica Synths - DIY Output II
Barton - Decaying Analog Noise
Barton - Analog Drum
Barton - Eurobuffer (x2)
Barton - Balanced Outputs (x2)
Barton - CV Spreader (x2)
Befaco - Instrument Interface I2

PCB + Panel:
Terminal Tedium

Looking for:
CGS PCBS
CGS/Serge PCBS
Loudest Warning Panels/PCBS

Based in Europe

[XNIF]

I have PCBs (in Europe) to sell or trade:

PCB only:
* Mutable Instruments Shruthi (9 pcs) (5 euro)
* Mutable Instruments Anushri (1 kit has 2 pcbs rev. c ) (15 euro)

PCB populated:
* Mutable Instruments Shruthi MK4 filter board (35 euro)

I trade for Eurorack complete module

[forrest]

I have in the US:

300x b10k 9mm alpha style pots, knurled shaft
300x b100k 9mm alpha style pots, knurled shaft
300x b10k 9mm tall trimmer pots, 25mm shaft, black with white indicator
300x b100k 9mm tall trimmer pots, 25mm shaft, black with white indicator

interested in esoteric panels/pcbs, standalone instruments of any kind or complete modules, shoot me a private message!

[nrrrd]

I have a Turing Machine Mk2 PCB + black panel and the Volts and Pulses expanders, also with black panels available for trade.

I still have these plus:
Radio music pcb and black panel
Microphonie pcb and black panel

I’d like to trade for any ciat lonbarde pcb or meng qi pcb. Like paper circuits that have been made into pcbs. Except for rollz-5 as I have those.
Or anything esoteric and weird, especially stand alone instruments. What have you got?

[Eloc]

...Like paper circuits that have been made into pcbs...

I'm sure I saw someone selling some of these recently, maybe on the for sale section

edit: viewtopic.php?f=74&t=232911

[nrrrd]

...Like paper circuits that have been made into pcbs...

I'm sure I saw someone selling some of these recently, maybe on the for sale section.

Yeah, I bought my rollz-5 pcbs from mlogger. If anyone has any (or other interesting pcbs) that they didn’t get round to making them get in touch.

[jersupereq]

Updated list of PCBs for trade:

CGS:
VCA x 3
Cascade Mixer
Power Supply x 2
1973 VCF
Pulse Divider & Boolean logic (Semi Populated)
Analog Switch Matrix (Resistors & Diodes populated)


Fritz:
Threeler VCF
Double Deka VCO
TZ-FM VCO Teezer
5-Pulse Waveshaper
Double Well Chaos Generator

MISC:
Outsie V1.1 x 2 viewtopic.php?f=17&t=232057


Interested in 4u:
Buchla 200 series clones
Monsoon
Clee Euclidean Sequencer
Clee Orgone Accumulator
Clee Quantizer