2B7CD124-DD0F-434D-ADA3-D0CA3A3ED399.jpeg
Blanks. Not 100% hp accurate (ie may result in <1 how gaps if using threaded strip, but pretty all the same. Some silkscreen blemishes but nothing terrible.DIY Trade Thread [ Parts, PCBs, Panels ]
Moderators: Kent, luketeaford, Joe., lisa
- Bamboombaps
- Wiggling with Experience
- Posts: 424
- Joined: Wed Sep 16, 2015 7:14 am
- Location: Glasgow
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
Blanks. Not 100% hp accurate (ie may result in <1 how gaps if using threaded strip, but pretty all the same. Some silkscreen blemishes but nothing terrible.
You do not have the required permissions to view the files attached to this post.
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
I have 3 extras of a 14HP Rings panel with the Lord of the Rings ring inscription under the solder mask, as well as the tree of westron. Not my design, but someone kindly shared their gerbers with me on condition of only using for trades or gifts.
I would like to trade one for the topographic person (download/file.php?id=60398&mode=view) if you're interested.
I would like to trade one for the topographic person (download/file.php?id=60398&mode=view) if you're interested.
You do not have the required permissions to view the files attached to this post.
- Bamboombaps
- Wiggling with Experience
- Posts: 424
- Joined: Wed Sep 16, 2015 7:14 am
- Location: Glasgow
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
yea sure i could use a nice rings panel. dont suppose you have a veils one of any description?
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
No I don't. I'll send PM for detailsBamboombaps wrote: ↑Thu Oct 01, 2020 12:05 pmyea sure i could use a nice rings panel. dont suppose you have a veils one of any description?
Thanks
- tommy.york
- Wiggling with Experience
- Posts: 281
- Joined: Thu Feb 11, 2016 5:07 pm
- Location: New York, NY
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
Dear god what can I trade you for that Yipes / skeleton blank? You need any micro O_C PCB's?Bamboombaps wrote: ↑Tue Sep 29, 2020 5:10 pm2B7CD124-DD0F-434D-ADA3-D0CA3A3ED399.jpeg
Blanks. Not 100% hp accurate (ie may result in <1 how gaps if using threaded strip, but pretty all the same. Some silkscreen blemishes but nothing terrible.
- Bamboombaps
- Wiggling with Experience
- Posts: 424
- Joined: Wed Sep 16, 2015 7:14 am
- Location: Glasgow
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
I’ll pm you
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
Any Dreadbox Hades or Erebus kits out there?
- oberkorn
- Veteran Wiggler
- Posts: 642
- Joined: Tue Jan 18, 2011 6:30 am
- Location: Sweden, bork bork bork
- Contact:
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
ooh the blue one with the pills is nice. very acid!Blanks. Not 100% hp accurate (ie may result in <1 how gaps if using threaded strip, but pretty all the same. Some silkscreen blemishes but nothing terrible.
I currently have for trade: assembled Thomas Henry SN-Voice board (without ICs),
Eurokastle PCB, Hexinverter Postman PCB and some "mutable" PCBs (1 Riddles, 1 Streams and 2 Slides:
see http://amazingsynth.com for more info).
Also black Mutable Plaits and Clouds panels, Music Thing Radio Music black panel (not pictured)
Looking for
programmed fmogre dsp chip
blue and white knobs for Maths MkI
MakeNoise Maths Lightning Bolts Blank Panel
You do not have the required permissions to view the files attached to this post.
Last edited by oberkorn on Fri Jan 08, 2021 11:28 am, edited 2 times in total.
you have to pay for the music but the noise is free
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
Need to quote this, because those panels are great Paul! Nice work!Bamboombaps wrote: ↑Tue Sep 29, 2020 5:10 pm2B7CD124-DD0F-434D-ADA3-D0CA3A3ED399.jpeg
Blanks. Not 100% hp accurate (ie may result in <1 how gaps if using threaded strip, but pretty all the same. Some silkscreen blemishes but nothing terrible.
How much are they?
Edit: ah, dammit, doesn't show the picture

- Bamboombaps
- Wiggling with Experience
- Posts: 424
- Joined: Wed Sep 16, 2015 7:14 am
- Location: Glasgow
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
Don’t want to get into bother for posting prices in the trade thread so I’ll pm you 
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
I have an Extralife Super Sixteen black panel/PCB/chip for trade - grabbed this during the Kickstarter because I wanted to support it but don’t have a need for a Euro sequencer.
Interested in:
uJOVE v1.2 pcb/panel
Radio music/mikrophonie pcb/panels
Norns DIY stuff
Interested in:
uJOVE v1.2 pcb/panel
Radio music/mikrophonie pcb/panels
Norns DIY stuff
- Bamboombaps
- Wiggling with Experience
- Posts: 424
- Joined: Wed Sep 16, 2015 7:14 am
- Location: Glasgow
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
I have a few of these synth DIY rulers I've designed for trade
It's got hp and rack units on it as well as mm and inches
It has a drill guide for drilling rack brackets or cases
Bolt gauge for common sizes used in euro
It's 1U high and has mounting holes to be used as a blank
I also have the following Erica synths PCB panels sets for trade
VCO
Envelope
VCA
VCF
Modulator
Swamp
Bassline
Bbd delay
Mixer
Output
Midi cv
Hit me up with your trades
It's got hp and rack units on it as well as mm and inches
It has a drill guide for drilling rack brackets or cases
Bolt gauge for common sizes used in euro
It's 1U high and has mounting holes to be used as a blank
I also have the following Erica synths PCB panels sets for trade
VCO
Envelope
VCA
VCF
Modulator
Swamp
Bassline
Bbd delay
Mixer
Output
Midi cv
Hit me up with your trades
You do not have the required permissions to view the files attached to this post.
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
Hey,
I am looking for MI Shades PCB and Panel.
I can offer you:
Quadtec 101 PCB + Panel
O_C PCBs
uTemps-Utile PCBs
If you wanna trade, hit me up
I am looking for MI Shades PCB and Panel.
I can offer you:
Quadtec 101 PCB + Panel
O_C PCBs
uTemps-Utile PCBs
If you wanna trade, hit me up

Re: DIY Trade Thread [ Parts, PCBs, Panels ]
I’m looking for an audio upgrade drop in replacement for a TL072 - some kind of OPA/Brown Burr replacement and I have the following to trade:
TL072s
TL074s
JRC4558s
LM3900Ns
US only please
TL072s
TL074s
JRC4558s
LM3900Ns
US only please
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
Looking for a DIY Dreadbox Hades or Antiphon.
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
Note- these are available again due to some shipping errors.djs wrote: ↑Tue Jun 09, 2020 7:49 amThis is a set of 4 pcbs that can be used to make LED ring type controllers, plus 5 midibox pcbs to make it work (DIN R5, DOUT R5, MBHP_AINSER64, 2xCORE_LPC17). Also included is some resistor networks that I think are part off the midibox pcbs (I haven't checked). Nothing is soldered in to any place.
Interested in:
Buchla panels
CGS pcbs- particularly CGS48 VCO, DUSG, etc. Preferably newer version ones.
Interesting effects pcbs- especially delay or reverb based ones.
Honestly I'd prefer US only right now- not because I don't want to ship internationally, but with the virus, shipping overseas is problematic.
LED ring controllers.jpg
"Noise is what the Earth is made of" - David Bowie
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
Looking for a CGS Serge Phaser PCB if anyone has one?
- the bad producer
- Super Deluxe Wiggler
- Posts: 2615
- Joined: Tue Mar 17, 2009 8:43 am
- Location: Clapton Pond
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
I ordered some of these by mistake (wanted 1.3"):
128x64 OLED Module SPI 0.96"Graphic Displays,White on Black
Free to good home! I have 5 to go
128x64 OLED Module SPI 0.96"Graphic Displays,White on Black
Free to good home! I have 5 to go
4U panels for sale/4U wiring diagrams/4U stuff here: http://www.loudestwarning.co.uk/
And here, http://loudestwarning.tumblr.com/
https://www.instagram.com/loudestwarning/
And here, http://loudestwarning.tumblr.com/
https://www.instagram.com/loudestwarning/
- synth.void
- Common Wiggler
- Posts: 221
- Joined: Mon Jan 27, 2020 6:50 pm
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
Looking for an O_C panel!
I have:
- a bunch of 0402 components for a Terminal (OSS Monome Teletype), and some more, basically everything that comes presoldered on the pusherman PCB
- a DSO138 scope SMD kit
- a dead doepfer precision adder
I have:
- a bunch of 0402 components for a Terminal (OSS Monome Teletype), and some more, basically everything that comes presoldered on the pusherman PCB
- a DSO138 scope SMD kit
- a dead doepfer precision adder
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
10k lin Centre detent x1
10k log x4
50k lin x4
50k log x12
100k lin x1
500k lin x1
1m lin x4
You do not have the required permissions to view the files attached to this post.
- Bamboombaps
- Wiggling with Experience
- Posts: 424
- Joined: Wed Sep 16, 2015 7:14 am
- Location: Glasgow
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
In addition to most of what I've posted over the last couple of pages I now have the following-
Spring reverb MK2 (music thing modular derived)
Jolin labs Dual benjolin BE2N
Model 291 vcf
Model 258 dual vco ( from viewtopic.php?p=3372653#p3372653)
Spring reverb MK2 (music thing modular derived)
Jolin labs Dual benjolin BE2N
Model 291 vcf
Model 258 dual vco ( from viewtopic.php?p=3372653#p3372653)
You do not have the required permissions to view the files attached to this post.
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
Hi, first post here. Let's try this 
What I have on offer:
- 4x PCBs uO_C
- 4x Panels (White) uO_C
I'll post pictures later tonight!
Looking for:
- make me a suggestion!
Bert

What I have on offer:
- 4x PCBs uO_C
- 4x Panels (White) uO_C
I'll post pictures later tonight!
Looking for:
- make me a suggestion!
Bert
- synth.void
- Common Wiggler
- Posts: 221
- Joined: Mon Jan 27, 2020 6:50 pm
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
Just realized I have a couple of them too. Any ideas where they could be used?the bad producer wrote: ↑Fri Nov 13, 2020 9:42 amI ordered some of these by mistake (wanted 1.3"):
128x64 OLED Module SPI 0.96"Graphic Displays,White on Black
Free to good home! I have 5 to go
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
If you have any old synths/computers that still use a floppy drive, you can upgrade to a Gotek USB reader. The Gotek itself can be upgraded with FlashFloppy firmware, which allows for some hardware mods to the Gotek, including an OLED screen...of which yours happens to be the right size and type (I think).synth.void wrote: ↑Sat Nov 21, 2020 3:45 amJust realized I have a couple of them too. Any ideas where they could be used?the bad producer wrote: ↑Fri Nov 13, 2020 9:42 amI ordered some of these by mistake (wanted 1.3"):
128x64 OLED Module SPI 0.96"Graphic Displays,White on Black
Free to good home! I have 5 to go
Re: DIY Trade Thread [ Parts, PCBs, Panels ]
Pretty sure they work for the 1u versions of o&c and temps utile (will also be easy to use in your personal teensy adventure)synth.void wrote: ↑Sat Nov 21, 2020 3:45 amJust realized I have a couple of them too. Any ideas where they could be used?the bad producer wrote: ↑Fri Nov 13, 2020 9:42 amI ordered some of these by mistake (wanted 1.3"):
128x64 OLED Module SPI 0.96"Graphic Displays,White on Black