[PCB offer] Thomas Henry's 555-VCO for 4U

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: lisa, luketeaford, Kent, Joe.

User avatar
fonik
Super Deluxe Wiggler
Posts: 3314
Joined: Fri Sep 19, 2008 5:54 am
Location: Germany
Contact:

[PCB offer] Thomas Henry's 555-VCO for 4U

Post by fonik » Wed Nov 20, 2013 3:14 am

hi all,

as you might already know nordlead is doing two panel runs for serge style 4U systems:
nordlead's WAD and LaBestia 4U panels

if you order the WAD or LaBestia panel you should order the needed 555-VCO 4U PCBs from nordlead as well. he will mail them bundled.

however, if you are interested in ONLY the 4U 555-VCO PCB, WITHOUT the panel, then you should order here.

i already ordered the prototye and will do a test build as soon as it arrived. the PCBs should be available before christmas.
the PCB is 6x2in to fit perfectly in your boat.

the pricing will be the same as for the generic version i recently offered, however, due to the size of the board there is no cheap single PCB option:
PCB
7.50 EUR/ea
+ SHIPPING
4.-EUR worldwide, 2.-EUR Deutschland
(edit 3 dec 13)


this is how it will look like:
Image
555-VCO-Serge by fonitronik, on Flickr
Last edited by fonik on Tue Dec 03, 2013 5:08 pm, edited 1 time in total.
Big Boss at fonitronik.de
Tech Buddy at Random*Source/Serge

User avatar
StillNotWorking
Veteran Wiggler
Posts: 654
Joined: Thu Aug 22, 2013 3:29 pm
Contact:

Order 2 PCB

Post by StillNotWorking » Wed Nov 20, 2013 3:45 am

I like to order 2 PCB's please. Although I rather have the generic version if you have more of them in stock?

User avatar
fonik
Super Deluxe Wiggler
Posts: 3314
Joined: Fri Sep 19, 2008 5:54 am
Location: Germany
Contact:

Post by fonik » Wed Nov 20, 2013 5:08 am

i will ask for interest in the common PCBs for the VCO, LFO and ADSR in another thread soon. at least for the VCO i still get inquiries so that i will most likely be able to order PCBs and eurorack panels for the VCO at least.
so you could just pass on this 4U version and wait for more of the original PCBs to come.
Big Boss at fonitronik.de
Tech Buddy at Random*Source/Serge

User avatar
StillNotWorking
Veteran Wiggler
Posts: 654
Joined: Thu Aug 22, 2013 3:29 pm
Contact:

Post by StillNotWorking » Wed Nov 20, 2013 5:12 am

fonik wrote:i will ask for interest in the common PCBs for the VCO, LFO and ADSR in another thread soon. at least for the VCO i still get inquiries so that i will most likely be able to order PCBs and eurorack panels for the VCO at least.
so you could just pass on this 4U version and wait for more of the original PCBs to come.
Thanks! :guinness:

User avatar
Isaiah
Super Deluxe Wiggler
Posts: 1804
Joined: Wed Jun 02, 2010 6:31 am

Post by Isaiah » Wed Nov 20, 2013 5:31 am

I'd like to place a definite order for two PCBs please,
possibly more.
Is there a deadline?
Thanks for making these available!

User avatar
fonik
Super Deluxe Wiggler
Posts: 3314
Joined: Fri Sep 19, 2008 5:54 am
Location: Germany
Contact:

Post by fonik » Wed Nov 20, 2013 6:51 am

Isaiah wrote:I'd like to place a definite order for two PCBs please,
possibly more.
Is there a deadline?
Thanks for making these available!
a deadline is not defined yet, however, it should be within the next two weeks. it has to be coordinated with the WAD and LaBestia panel run. will talk to nordlead about this soon.
Big Boss at fonitronik.de
Tech Buddy at Random*Source/Serge

User avatar
nordlead
Ultra Wiggler
Posts: 973
Joined: Mon Feb 25, 2013 11:23 am
Location: Germany

Post by nordlead » Wed Nov 20, 2013 10:15 am

Beautiful!! :tu: :tu: :tu:

Deadline of (about) 2 weeks sounds good from my end. :party:
Random*Source: Serge, JHaible & more ... (also on facebook.com/randomsource)

(please contact me through email rather than pm: rc at randomsource . net - thanks!)

User avatar
oldenjon
Ultra Wiggler
Posts: 758
Joined: Sun Feb 26, 2012 1:28 am
Location: Sacramento, CA

Post by oldenjon » Wed Nov 20, 2013 12:42 pm

Would love to have more of these :tu:
Put me down for 2
Last edited by oldenjon on Sun Apr 06, 2014 11:13 am, edited 2 times in total.
"We all dance by ourselves, that's why we only play electronic music"

http://synthscalledbeasts.tumblr.com/

User avatar
CLee
Super Deluxe Wiggler
Posts: 1727
Joined: Mon Apr 05, 2010 6:49 pm
Location: Chicago
Contact:

Post by CLee » Wed Nov 20, 2013 12:56 pm

I'm firm for at least 2 boards.

Craig

User avatar
humax5600
Common Wiggler
Posts: 126
Joined: Mon May 20, 2013 10:42 am
Location: Germany - OWL

Post by humax5600 » Wed Nov 20, 2013 1:29 pm

Hi fonik ,
can you tell me the dimension of the PCB in centimeter ?

About 5x15 cm , is that right ?

Klaus

User avatar
fonik
Super Deluxe Wiggler
Posts: 3314
Joined: Fri Sep 19, 2008 5:54 am
Location: Germany
Contact:

Post by fonik » Wed Nov 20, 2013 2:44 pm

Big Boss at fonitronik.de
Tech Buddy at Random*Source/Serge

User avatar
humax5600
Common Wiggler
Posts: 126
Joined: Mon May 20, 2013 10:42 am
Location: Germany - OWL

Post by humax5600 » Thu Nov 21, 2013 12:23 pm

Thanks for the quick response and the link.
I would also take 3 PCBs

User avatar
drip.feed
Roll it off at 30 Hz
Posts: 3179
Joined: Thu Sep 15, 2011 10:05 am
Location: Belfast, Northern Ireland

Post by drip.feed » Fri Nov 22, 2013 10:27 am

Hi Matthias

I would need 2 of these for a BESTIA (and another 2 for the WAD), right?
Dripfeed

User avatar
Cheradenine
Modulate me harder
Posts: 664
Joined: Sun May 23, 2010 12:51 pm
Location: Between Léman and Jura

Post by Cheradenine » Fri Nov 22, 2013 1:39 pm

These VCO are so great I'll take 4 PCB ! :sb:

User avatar
fonik
Super Deluxe Wiggler
Posts: 3314
Joined: Fri Sep 19, 2008 5:54 am
Location: Germany
Contact:

Post by fonik » Sat Nov 23, 2013 8:46 am

drip.feed wrote:Hi Matthias

I would need 2 of these for a BESTIA (and another 2 for the WAD), right?
if you need it for nordleads panels you should order the PCBs from him.
here i sell the PCBs only for those, who don't want one of these fine panels...
Big Boss at fonitronik.de
Tech Buddy at Random*Source/Serge

ElectroSteam
Common Wiggler
Posts: 201
Joined: Thu Oct 18, 2012 5:19 pm
Location: Denmark

Post by ElectroSteam » Sat Nov 23, 2013 4:02 pm

I would like to order 2 of these PCBs, please.

User avatar
Clockgate
At paranoia's poison door
Posts: 1203
Joined: Mon Oct 05, 2009 7:10 am
Location: London

Post by Clockgate » Sat Nov 23, 2013 4:59 pm

I'll take 2 PCBs please. :tu:
Musaceae Videos Banana
Clockgate Videos 5U & Eurorack

skee
Common Wiggler
Posts: 52
Joined: Sun Sep 22, 2013 11:39 am
Location: Dublin

Post by skee » Mon Nov 25, 2013 5:21 pm

Hi Fonik, I would like to order 6 PCBs please. How do you prefer payment?

User avatar
mumblinstevedubya
Common Wiggler
Posts: 150
Joined: Sat Nov 27, 2010 7:20 am
Location: East Sussex

Post by mumblinstevedubya » Tue Nov 26, 2013 7:20 am

2 for me please :tu:

User avatar
Baszline
Common Wiggler
Posts: 123
Joined: Sun Dec 26, 2010 11:33 am
Location: The Netherlands

Post by Baszline » Tue Nov 26, 2013 7:35 am

I'm up for one! Thanks!! :tu:

User avatar
msprigings
Veteran Wiggler
Posts: 558
Joined: Sun Oct 09, 2011 2:06 pm
Location: Virginia

Post by msprigings » Tue Nov 26, 2013 8:41 am

3 boards for me

User avatar
fonik
Super Deluxe Wiggler
Posts: 3314
Joined: Fri Sep 19, 2008 5:54 am
Location: Germany
Contact:

Post by fonik » Wed Nov 27, 2013 6:43 pm

prototype PCB arrived today and i already stuffed it. i powered it up w/o any peripherals and i saw a nice, sober and balanced triangle on the output :D
more news on the weekend.
Big Boss at fonitronik.de
Tech Buddy at Random*Source/Serge

User avatar
pre55ure
Super Deluxe Wiggler
Posts: 1421
Joined: Tue May 01, 2012 7:15 pm
Location: SoCal
Contact:

Post by pre55ure » Wed Nov 27, 2013 9:30 pm

A truly great DIY oscillator.
I'm in for 4

:tu:

Edit: 2 more posts and this would have been #555 :hihi:

seanpark
Veteran Wiggler
Posts: 552
Joined: Thu Aug 30, 2012 11:49 pm

Post by seanpark » Fri Nov 29, 2013 12:58 pm

I would like 4 PCBs please!

I still have some of the euro version but I love how serge/cgs format pcbs fit right behind 1 MU panels.

User avatar
jooks
Wiggling with Experience
Posts: 323
Joined: Sun Apr 26, 2009 8:39 am
Location: Umeå

Post by jooks » Sat Nov 30, 2013 2:17 pm

2 for me thanks!

Post Reply

Return to “Music Tech DIY”