Mark Verbos 288v Time Domain Processor

Discussing some incredible modules that don't quite fit into the other forum categories.

Moderators: lisa, Kent, Joe.

User avatar
batchas
Super Deluxe Wiggler
Posts: 4489
Joined: Wed Nov 09, 2011 2:51 pm

Re: Mark Verbos 288v Time Domain Processor

Post by batchas » Sat Feb 08, 2020 11:44 am

njdoyle wrote:
Sat Feb 08, 2020 9:32 am
Here's the envelope follower output I'm talking about:
Oh yeah cool! Makes sense :tu:
I thought I had this on mine too hehe.
Thx a lot for sharing the pictures of the boards too. Great!

User avatar
njdoyle
Common Wiggler
Posts: 171
Joined: Tue Jan 28, 2014 5:00 pm
Location: Ottawa
Contact:

Re: Mark Verbos 288v Time Domain Processor

Post by njdoyle » Sat Feb 08, 2020 12:00 pm

Here's a patch I put together that has some simple use of the 288v. It comes in at around the 1 minute mark. First I use it as a simplish stereo delay and then at around 2:10 I patch it to do some recycle kinda glitchy stuff. Just scratching the surface with it here.


jimfowler
Wiggling with Experience
Posts: 465
Joined: Mon Feb 22, 2016 1:13 pm
Location: New York

Re: Mark Verbos 288v Time Domain Processor

Post by jimfowler » Sat Feb 08, 2020 8:12 pm

Killer sounds njdoyle

User avatar
thetwlo
Super Deluxe Wiggler
Posts: 4763
Joined: Wed Apr 16, 2008 4:05 pm
Location: East Bay, CA US

Re: Mark Verbos 288v Time Domain Processor

Post by thetwlo » Sat Feb 08, 2020 10:16 pm

Looks and sounds great, I wonder how similar the new rev is to the euro Multi-Delay Processor, which I think Mark said was based on the 288v.

User avatar
tIB
Stainer!
Posts: 9031
Joined: Mon Jun 08, 2009 5:28 am
Location: UK

Re: Mark Verbos 288v Time Domain Processor

Post by tIB » Sun Feb 09, 2020 5:04 am

Thanks for the pics, looks tidy! First impressions of the demo are that it sounds less washing machiney- I can hear the delays over the glorious noise!

User avatar
momo
Ultra Wiggler
Posts: 889
Joined: Wed Jun 17, 2009 4:40 am
Location: London, England

Re: Mark Verbos 288v Time Domain Processor

Post by momo » Sun Feb 09, 2020 9:00 am

Thanks for pics!

User avatar
Happyanimal
Wiggling with Experience
Posts: 422
Joined: Sat Jul 26, 2014 11:12 am
Location: Portland, OR

Re: Mark Verbos 288v Time Domain Processor

Post by Happyanimal » Fri Feb 14, 2020 10:36 am

batchas wrote:
Sat Feb 08, 2020 3:26 am
Here's a video shoing what the envelope follower that I mentioned in my previous post is doing on the "older" 288v version (it does way more, and this video quality it's not very good, but I never finished the demo video I started with the 288v in 2014!):
Curious, why do you tap the front panel and say it is sensitive? Are the faders or audio intermittent or shorting out?

User avatar
batchas
Super Deluxe Wiggler
Posts: 4489
Joined: Wed Nov 09, 2011 2:51 pm

Re: Mark Verbos 288v Time Domain Processor

Post by batchas » Fri Feb 14, 2020 1:04 pm

Happyanimal wrote:
Fri Feb 14, 2020 10:36 am
Curious, why do you tap the front panel and say it is sensitive? Are the faders or audio intermittent or shorting out?
By simply turning the frequency knob there's sometimes a huge noise pumping out. Gently taping on the panel makes it obvious (to show) or also to make it "go back to normal". I don't remember how we call it in english exactly, but it's a trace (or several) on the PCB which is touching another or is shorting because the PCB is moved just a bit (by simply turning the pot or moving the panel). A micro-movement so to say is enough.
The boards, solder joints etc on this first version makes it very sensitive. From time to time I have to open it and reflow at critical places.
But this noise is always coming back at some point.

Mark making a new version with modern components was IMO a great idea.

Post Reply

Return to “Buchla, EMS & Serge”