Hello Hordijk System

Moog, Synthesizers.com, MOTM, Modcan, Moon and others..... Go big!

Moderators: Kent, luketeaford, lisa, Joe.

Post Reply
Neovintage
Veteran Wiggler
Posts: 704
Joined: Mon Oct 29, 2012 8:15 am
Location: Wine, Bread and Cheese

Re: Hello Hordijk System

Post by Neovintage » Mon Sep 14, 2020 12:15 pm

ear ear wrote:
Mon Sep 14, 2020 12:00 pm
southphillysynths wrote:
Sun Sep 13, 2020 6:00 pm
Ah wasn't sure! I don't know why I thought the phaser or shifter was maybe out of production.
You might have been thinking of the Phaser Filter.
Or the VCA Shaper, old version of the Shaper
thehordijkmodular.blogspot.fr

User avatar
ear ear
Super Deluxe Wiggler
Posts: 1234
Joined: Mon Aug 23, 2010 11:10 am

Re: Hello Hordijk System

Post by ear ear » Mon Sep 14, 2020 3:53 pm

Fun times (apologies if this has been posted in this thread before):



https://rudigermeyer.com/notes/2017-11-13-23-18-56
He throws the ink first and works out what it is later. "I've got to turn that into parrots." - Ralph Steadman

merchant
Common Wiggler
Posts: 193
Joined: Mon May 26, 2014 2:49 pm
Location: London
Contact:

Re: Hello Hordijk System

Post by merchant » Wed Sep 16, 2020 6:42 pm

swannodette wrote:
Sat Sep 12, 2020 10:00 pm
The long wait is finally coming to end. The two systems we ordered on February 28th, 2019 are ready to ship. This is a nice shot of them getting burned in his studio:
beautiful, thanks for posting :)

gnome666
Common Wiggler
Posts: 134
Joined: Mon Sep 19, 2016 1:26 am

Re: Hello Hordijk System

Post by gnome666 » Thu Sep 17, 2020 12:11 am

Anyone have any tips as to how I would interface my 4u serge banana jacks with the Hordijk? some of the node processor/matrix plugs that came with my unit (and I believe I have read somewhere upthread here a long way back) seem to accept banana jacks, but the tips appear to be TRS rather than TS. So, I'm assuming I would still need some sort of grounding connection? Anyone had any success in this realm?

User avatar
Corrupt
Wiggling with Experience
Posts: 252
Joined: Tue Jul 06, 2010 6:34 am

Re: Hello Hordijk System

Post by Corrupt » Thu Sep 17, 2020 4:53 pm

Running the Serge and Hordijk final audio outs into the same mixer or interface should take care of it.

gnome666
Common Wiggler
Posts: 134
Joined: Mon Sep 19, 2016 1:26 am

Re: Hello Hordijk System

Post by gnome666 » Thu Sep 17, 2020 11:45 pm

Corrupt wrote:
Thu Sep 17, 2020 4:53 pm
Running the Serge and Hordijk final audio outs into the same mixer or interface should take care of it.
thanks, will give it a go.....

User avatar
jpauty
Wiggling with Experience
Posts: 273
Joined: Thu Feb 09, 2012 7:43 am
Location: Versailles, France

Re: Hello Hordijk System

Post by jpauty » Fri Sep 18, 2020 7:48 am

Hi Guys,

Here is a small tip, I just found yesterday. Maybe it was already mentioned in the thread, I don't know. You can beef up the timbre of the osc hrm by plugging the full out to the hrm mod input of the oscillator. Then play with hrm mod knob, all hrm and odd hrm knobs.

Cheers

User avatar
ear ear
Super Deluxe Wiggler
Posts: 1234
Joined: Mon Aug 23, 2010 11:10 am

Re: Hello Hordijk System

Post by ear ear » Fri Sep 18, 2020 11:03 am

jpauty wrote:
Fri Sep 18, 2020 7:48 am
Hi Guys,

Here is a small tip, I just found yesterday. Maybe it was already mentioned in the thread, I don't know. You can beef up the timbre of the osc hrm by plugging the full out to the hrm mod input of the oscillator. Then play with hrm mod knob, all hrm and odd hrm knobs.

Cheers
It has -- but useful information should be kept alive. :tu: Try running the feedback signal through a bi-polar VCA, then go to town on the VCA control input... :party:
He throws the ink first and works out what it is later. "I've got to turn that into parrots." - Ralph Steadman

gnome666
Common Wiggler
Posts: 134
Joined: Mon Sep 19, 2016 1:26 am

Re: Hello Hordijk System

Post by gnome666 » Fri Sep 18, 2020 1:27 pm

ear ear wrote:
Fri Sep 18, 2020 11:03 am
jpauty wrote:
Fri Sep 18, 2020 7:48 am
Hi Guys,

Here is a small tip, I just found yesterday. Maybe it was already mentioned in the thread, I don't know. You can beef up the timbre of the osc hrm by plugging the full out to the hrm mod input of the oscillator. Then play with hrm mod knob, all hrm and odd hrm knobs.

Cheers
It has -- but useful information should be kept alive. :tu: Try running the feedback signal through a bi-polar VCA, then go to town on the VCA control input... :party:
YES YES!!! Reposting tips like these is always appreciated. Thanks! If i get a chance to diddle around will try to post a clip or 2 :slapfight:

swannodette
Learning to Wiggle
Posts: 30
Joined: Thu Aug 23, 2018 6:05 pm

Re: Hello Hordijk System

Post by swannodette » Fri Sep 18, 2020 1:51 pm

swannodette wrote:
Sat Sep 12, 2020 10:00 pm
The long wait is finally coming to end. The two systems we ordered on February 28th, 2019 are ready to ship. This is a nice shot of them getting burned in his studio:
Hoo boy, systems shipped - looks like they'll arrive Monday :)

swannodette
Learning to Wiggle
Posts: 30
Joined: Thu Aug 23, 2018 6:05 pm

Re: Hello Hordijk System

Post by swannodette » Thu Sep 24, 2020 7:24 am

First couple of hours with the system last night. Head spinning - it's going to take a long, long time.

One practical question - I looked around to find out where Hordijk gets his patch cables but couldn't figure it out. Does anybody know?

User avatar
xahdrez
Wiggling with Experience
Posts: 314
Joined: Wed Apr 03, 2013 3:16 pm
Location: London

Re: Hello Hordijk System

Post by xahdrez » Thu Sep 24, 2020 10:00 am

I think they're from thomann, from a range called sssnake. Like these ones, but you might need to double check details on length, mono/stereo etc. https://www.thomann.de/gb/the_sssnake_s ... gLFlfD_BwE

mbleming
Common Wiggler
Posts: 181
Joined: Fri Oct 30, 2009 12:02 am
Location: New Jersey

Re: Hello Hordijk System

Post by mbleming » Thu Sep 24, 2020 10:06 am

Congratulations on the new system! I'm not 100% sure, but I think the cables Rob provides are the sssnake patch cables available at Thomann Music here: http://www.thomannmusic.com/the_sssnake ... ceba32fddc

I've tried a ton of different ones and the cables provided by Rob have always been my favorite...
swannodette wrote:
Thu Sep 24, 2020 7:24 am
First couple of hours with the system last night. Head spinning - it's going to take a long, long time.

One practical question - I looked around to find out where Hordijk gets his patch cables but couldn't figure it out. Does anybody know?

swannodette
Learning to Wiggle
Posts: 30
Joined: Thu Aug 23, 2018 6:05 pm

Re: Hello Hordijk System

Post by swannodette » Thu Sep 24, 2020 10:24 am

Thanks! Ordered a bunch.

Post Reply

Return to “5U Format Modules”