COTK 1680 Delay

Moog, Synthesizers.com, MOTM, Modcan, Moon and others..... Go big!

Moderators: lisa, luketeaford, Kent, Joe.

Post Reply
croute
Common Wiggler
Posts: 56
Joined: Mon Sep 05, 2011 12:34 pm
Location: France

COTK 1680 Delay

Post by croute » Wed Jan 22, 2020 4:48 am

Hi,

Just buy a COTK 1680 and impossible to know exactly on the COTK website if it run in 12 or 15 volts?
My others COTK modules works nice with +/-15 volts but before to plug the 1680 i need some advices :goo:
Any informations about that?

User avatar
zeta
Common Wiggler
Posts: 226
Joined: Tue Jul 19, 2011 9:20 am
Location: Eternal weekend

Re: COTK 1680 Delay

Post by zeta » Wed Jan 22, 2020 6:33 am

Mine runs on 15.
If I remember well, I asked him before though, as he puts a header in place... I think.
Racks'NTracks ig.welt_am_draht

croute
Common Wiggler
Posts: 56
Joined: Mon Sep 05, 2011 12:34 pm
Location: France

Re: COTK 1680 Delay

Post by croute » Fri Jan 24, 2020 2:49 pm

A respons from Kazik who ll be helpful for someone who have some doubt about COTK modules.

"if the modules has a Molex connector then it is for +-15V,
with a COTK connector +-12V."

I guess some componants are not the same for Molex and COTK connector,but i don't understand why :?

croute
Common Wiggler
Posts: 56
Joined: Mon Sep 05, 2011 12:34 pm
Location: France

Re: COTK 1680 Delay

Post by croute » Sat Feb 01, 2020 11:49 am

Just received this amazing delay,finaly work fine in +/- 15volts...
But i have a problem with the amount of delay knob,all is fine but i have some crackles,distords and dry sound at the first quarter of the knob course...
Before to try to fix and to disassemble the 1680 if anyones have some advices?Change the pot,trimpot inside etc..?
Thank you

Post Reply

Return to “5U Format Modules”