My Euro to MOTM+Euro conversion project

Moog,, MOTM, Modcan, Moon and others..... Go big!

Moderators: Joe., lisa, luketeaford, Kent

Post Reply
Wiggling with Experience
Posts: 316
Joined: Wed Feb 13, 2019 12:16 am

My Euro to MOTM+Euro conversion project

Post by BlinkyLights » Wed Feb 05, 2020 8:30 pm

In this thread I will document my experience in converting some Eurorack modules of mine to MOTM sized and styled panels (but 2mm thick, and I will be keeping the Euro sized jacks and Euro power).

This project is just meant to gain the spacing/knob resolution of 5U, I like the rest of Euro just fine, and these modules are ones I'd never sell so I don't mind change...

First on my list is my uLFO, and a Doepfer 183-2 for its Resets as well as a Quad Attenuator from SSF, all rolled into one custom Panel I'm working on in Illustrator.

More details as they happen. It all started by me having a Matriarch and then a Grandmother and being so much happier with that type and size panel spacing...

I'll be breaking all manner of rules and conventions.

* 5U MOTM outside panel dimensions, but 2mm thick.
* Screw holes will be oval and where eurorack holes go
* I will use eurorack rails and power and 3.5mm jacks.
* Panel designs will follow no normal 5U conventions.

Common Wiggler
Posts: 82
Joined: Mon Dec 17, 2018 3:22 am

Re: My Euro to MOTM+Euro conversion project

Post by Thorsday » Thu Feb 06, 2020 9:36 pm

That's a great idea! Subscribed.

User avatar
Wiggling with Experience
Posts: 392
Joined: Mon Mar 16, 2015 6:53 am
Location: Pointe-Claire

Re: My Euro to MOTM+Euro conversion project

Post by DrReverendSeance » Sat Feb 08, 2020 6:06 am

Sounds interesting! Post pictures.

What drives the 2mm thick?

User avatar
Common Wiggler
Posts: 138
Joined: Sat Mar 01, 2014 6:44 pm

Re: My Euro to MOTM+Euro conversion project

Post by snevlida14 » Sun Mar 15, 2020 3:00 pm

Would love to see the progress. Good idea

Post Reply

Return to “5U Format Modules”