plague bearer r4 attenuator switch

Gear, Suggestions and Discussion.

Moderators: Kent, computer controlled, flight

Post Reply
User avatar
mcetilia
Learning to Wiggle
Posts: 9
Joined: Wed Mar 16, 2011 2:29 pm
Location: Providence, RI
Contact:

plague bearer r4 attenuator switch

Post by mcetilia » Wed Aug 01, 2012 4:25 pm

hi all,
building a pbbp r4 kit, and made the hole for the attenuator switch
too close to the bottom so it's hitting my rails…

was thinking maybe i could replace this switch with two 3-way dpdt switches,
of the micro mini variety, which would fit in the space i have remaining.

somehow in the process of scouting for parts & such,
i managed to lose the original switch. ugh.

wondering if anybody knows either:
a) what the part number for this switch is so i can order a replacement,
or b) if there's a good replacement part (or 2 if necessary)
that would fit the bill…

cheers,
mark

User avatar
mcetilia
Learning to Wiggle
Posts: 9
Joined: Wed Mar 16, 2011 2:29 pm
Location: Providence, RI
Contact:

Post by mcetilia » Wed Aug 01, 2012 7:21 pm

update: switch found.
would still be curious as to what this switch is,
since i didn't find anything like it in the usual sources
(digikey, mouser, jameco, etc.)
but, whew. that's a relief.

User avatar
mcetilia
Learning to Wiggle
Posts: 9
Joined: Wed Mar 16, 2011 2:29 pm
Location: Providence, RI
Contact:

Post by mcetilia » Thu Aug 02, 2012 12:06 pm

(oops, back-button triggering double-post)

Post Reply

Return to “Flight of Harmony”