Gear, Suggestions and Discussion.

Moderators: Kent, computer controlled, flight

User avatar
A Towering Mediocrity
Posts: 4781
Joined: Tue Apr 07, 2009 11:04 pm
Location: San Diego

Post by suboptimal » Thu Mar 18, 2010 5:35 pm

Picked up dubchild's, also in California, so it didn't cross borders at least on this pass. I've got some new tricks to try out next chance I get...

User avatar
The Plague Bearer
Posts: 1323
Joined: Fri Oct 03, 2008 8:12 pm
Location: Seattle, WA, US

Post by flight » Thu Mar 18, 2010 11:43 pm

OK, cool. Keep me posted!

Common Wiggler
Posts: 101
Joined: Wed Aug 24, 2011 8:08 am

Post by alexdsteak » Mon Mar 19, 2012 4:16 am

Just bumping up this thread, as from today I am the happy owner of a INM too :)

Got it from the bay, it was packed with transparent foil termosealed around it - just wanted to know if this is the way FoH was shipping it or it was just
repacked by the seller. One of the knob falls off (not tight enough around
the pot), but can be fixed in minutes with an additional layer of tape.

Now I have to find either a replacement power supply or an adapter from
AU connectors to CH :P

Tonight I will hook it up, will steal one of those adapters from the office and
check it out :)


1-Post Wiggler
Posts: 1
Joined: Thu Sep 04, 2014 11:29 pm

INM question

Post by junai » Thu Dec 17, 2015 12:44 am

I'm hoping this thread can be brought back to life for a moment...(my first post in years, if not ever...thanks in advance for any help!)

I've been experimenting with using Silent Way to control my INM, which for one reason and another I haven't used for a couple of years.

Calibrating the VCO was fairly straightforward, but I can't figure out how to fire the INM's VCAs using a gate or envelope signal from SilentWay (I'm using the Voice Controller). Essentially, all I can get from the INM is a drone whose pitch I can control.

My memory may be faulty here but...shouldn't this be possible? Any ideas welcome on what I'm doing wrong...thanks.

Post Reply

Return to “Flight of Harmony”